Argon welding process using filler wire

Home / Consumables

Back

Reading time: 2 min

0

1584

Welding using argon is very popular among professional workers. With this type of welding work, the quality of the seams is many times higher, they are beautiful and durable.

To carry out such work you need to have a special material called filler metal wire.

Here you will find detailed information about what argon welding is and how to properly use filler wire, how many types and what they are.

• Basic data
• Selection of filler material
• Exploitation
• Let's summarize

Basic data

Filler wire is a special material with a small cross-section, which can consist of both different metals and artificial polymers.

The additive is very long, so it can be found in stores in the form of a coil. It is measured in kilograms. The type of filler material depends on the metal or polymer from which it is made.

Wire for welding work with metal products in an argon environment is a separate type. It is used when working on an automatic or semi-automatic machine.

Not only can an additive be made from this material; sometimes it is used to create electrodes.

The use of filler wire for welding with argon facilitates the replacement of electrodes and creates smooth seams. The filler wire acts as a conductor between the welding current and the arc; it ignites the latter and maintains constant combustion.

Over time, the material is melted and mixed with the main workpiece. When mixing the workpiece and wire, the chemical and physical characteristics of the seams are improved.

The composition of the filler wire can contain any metal, since during operation it must be of the same metal as the workpiece itself.

Accordingly, if you are working with aluminum parts, the filler wire material should also be aluminum. Sometimes such wire is called filler rods for argon-arc work with aluminum and its alloys.

If you need to weld stainless material, then the composition of the wire should be based on anti-corrosion steel. These examples are highly generalized; we will cover all the details below.

Physicochemical characteristics

Filler wire for argon welding often contains alloying elements that increase corrosion resistance. This is very convenient both during welding and during storage. A special composition helps to create a plastic material that tolerates deformation well, and this applies to the state before welding, as well as after it. In most cases, except carbon wire, the material has a low carbon content, which counters its brittleness. Thanks to this, the impact strength of the seam can be increased. Some brands are able to reduce the thermal conductivity of the metal so that deformation does not occur during welding

Filler wire for argon welding

Technical characteristics of popular brands

Using the example of the SV08G2S brand, we can consider the technical characteristics. Tensile strength can reach from 882 to 1370 MPa. Moreover, the smaller the diameter of the filler material, the higher this indicator.

Filler wire grade SV08G2S

In OK 15.66 wire, the tensile strength is only 500 MPa, since this is a grade for welding cast iron, so it has a fairly high fragility.

OK 15.66 filler wire

The characteristics of the 06X15 brand are as follows. The melting point is from 1453 degrees Celsius, the relative elongation is up to 35%, and the hardness is 90 HB.

Selection of filler material

Since the range is quite extensive, novice welders may encounter some difficulties. Materials differ in manufacturers, brands, and diameters. What choice to make from all this?

The first step is to find out the type of work. Will you be producing or welding metals? Or work with soldering plastic parts? Having found the answer to this question, you will already move forward.

For example, you are going to carry out argon welding of metals. Find out what kind of metal you are going to weld. In this case, you need not just a type of metal, but a specific brand.

Once you determine that you have a steel billet, you may be faced with a dozen more different types of steel.

Once the brand becomes known to you, you can begin choosing materials.

The diameter of the additive must correspond to the thickness of the workpiece. The thicker the part, the larger the diameter. Often the values ​​of wire diameter and metal thickness coincide.

It doesn't matter who the manufacturer is. The main thing is what were the conditions during storage and transportation of the additive to the store. Most likely, you will not be able to find out this information one hundred percent.

Therefore, it is better to purchase from a trusted store, and if possible, then go to an official representative. Representatives usually follow all storage rules and you don’t have to worry about this.

Selecting an electrode for TIG welding

Tungsten was not chosen as an electrode by chance.
The metal is famous for its special refractoriness, for which it simply has no competitors. A tungsten electrode for argon arc welding can be identified by the “W” marking. Other symbols and even color indicate the type of alloying additives. They are necessary to improve the performance and increase the service life of consumables.

Electrodes can be either universal or special - for welding only with direct or only with alternating current.

As in the case of gas, let’s highlight the most popular type of electrode:

• WP (green electrodes) - tungsten electrodes without special additives for welding with alternating current
• Tungsten electrodes alloyed with lanthanum oxide WL-20 (blue color) and WL-15 (gold color) - universal electrodes for welding on direct and alternating currents

There are also tig electrodes with other additives - zirconium, cerium, yttrium oxide - there are quite a lot of them.
Table. Tungsten electrodes - composition and properties

In addition to composition and properties, important parameters are diameter and length. The leading position in demand is occupied by electrodes for tig welding with a length of 175 mm. However, in addition to them, there are options of 50, 75 and 150 mm.

With diameter, everything is much more complicated, because it must be selected depending on the thickness of the metal being welded and the type of welding current. The table below will help you with this question. Here are recommendations for the most common WP and WL electrodes:

And the last thing is sharpening the tungsten electrode. Proper sharpening will have a positive effect on arc ignition, combustion stability and the width of the weld. In most cases, the ideal option is a cone-shaped sharpening (for alternating current, a rounded tip is made).

The sharpening length should exceed the electrode diameter by 2-2.5 times. Long and thin grinding of the electrode is especially important when welding thin materials; this gives good focusing of the welding arc.

Exploitation

The choice of filler material is not the most important element when working with argon media. You also need to understand welding technology and what its standards are. The technology itself is based on the use of argon gas to form seams.

For this type of welding, filler wire and electrodes are used. Electrodes may or may not be consumable. We will consider the use of non-consumable electrodes, since this method is more popular.

For welding in argon, automatic and semi-automatic machines are used. The additive is filled into the feed mechanism, then the desired mode is set and it passes into the welding zone.

Welding Features

Stainless steel was obtained by accident through experimentation. Small additions of chromium, nickel and molybdenum (these components make up only about 15% of the total) led to significant changes in the chemical and physical properties of stainless steel.

It has become resistant to moisture, dirt and sources of corrosion. But at the same time, a number of features have been added that make welding not so easy. We're talking about a high melting point (1800 degrees!). Because of this, it is difficult to choose the optimal welding mode so that lack of penetration or burns do not form.

In our opinion, the optimal technology for welding stainless steel is semi-automatic, using shielding gas. When using this method, the wire is fed in a given mode into the welding zone, freeing the welder’s hands. And the gas protects the metal from oxidation, improves the quality and appearance of the seam.

It is better to use carbon dioxide as a gas. This gas does not affect the chemical properties and structure of the metal in any way, which is very good. All the characteristic features of stainless steel are taken into account, its advantages are not lost and its disadvantages are leveled out.

Let's summarize

This is all the basic information that will help you work with argon gas. When selecting filler materials, consider what metal you are going to work with.

The additive can be used to mix with the workpiece and to form a joint using only the additive material.

Do you have experience with welding in an argon environment? What filler material did you choose? Have you had any problems during welding work?

Leave your comments and share your experience. Maybe your story will help beginners avoid serious mistakes. Productivity at work!