Technical characteristics of the radial drilling machine 2K52


Technical characteristics of the radial drilling machine 2K52

All equipment of this type is designed to work with large workpieces, whose free movement on the table is impossible or takes a lot of time.
If we delve even deeper into the information about the operation of the machine, it is easy to find out that it is used to produce a large or small number of parts, especially those of the same size range. This feature makes it easy to complete standard orders in a short time.

It is easy to perform the following types of work on the equipment:

  • drilling;
  • countersinking process;
  • reaming;
  • deployment;
  • thread cutting.

There is a variation of this machine, it is called a radial drilling machine 2K52-1. The difference between these two units is the landing and secondary connecting bases. The location of these parts allows you to expand the range of use of the machine in the production of small-sized parts.

Technical information

Considering the overview of the operations performed, which are easily performed on the 2K52 radial drilling machine, it is necessary to highlight:

  1. The characteristics and location of the main modules make it easy to drill almost any size hole.
  2. Functional drawings and a list of instructions guide the deployment operation.
  3. Countersinking is in progress.
  4. The model, despite its size and weight, is capable of cutting various threads.

Electrical circuit diagram

The 2K52 radial drilling machine, the drawings of which reflect complete operational information about the capabilities of the device, have the following technical characteristics:

  1. The accuracy class indicator of the drilling machine according to GOST belongs to group N.
  2. The installation passport has restrictions on the permissible diameter of parts - 45 mm.
  3. During operation, the spindle overhang is 800 mm.
  4. Allowable movement along the hose in mm. – 900.
  5. During the drilling process, the main head moves by a maximum of 900 mm.
  6. The manual reflects the parameter for the angle of rotation of the sleeve around the main column - 360 degrees.
  7. The dimensions of the drilling base (plate) are 800x630 mm.


Machine appearance


Plaque from machine 2K52

Radial drilling machine 2K52

Radial drilling machine model 2K52,2K52-1 designed for drilling work in medium and large products. You can also perform other work on it:

  • Countersinking;
  • Reaming;
  • Deployment;
  • Threading

It is used in small-scale and mass production.

Controls of radial drilling machine 2K52,2K52-1

  1. Switching spindle head speeds;
  2. Limit switch pusher;
  3. Manual lowering of the barrel;
  4. Handle for turning on the spindle head, moving the sleeve and clamping and releasing the barrel;
  5. Switching spindle head speeds;
  6. Drill head movement;
  7. Mechanical spindle feed switch handle;
  8. Handle clamp carriage and column;
  9. Fine spindle feed manually;
  10. Fixation of the limb;
  11. Handle for turning on mechanical or manual feed of the spindle head;
  12. Turning on the dial stop;
  13. Sleeve rotation shaft;
  14. "Emergency stop";
  15. “Switching off the circuit”;
  16. Turning on local lighting;
  17. Input switch handle;
  18. Column manual clamp handle;
  19. Coolant control handle;
  20. Limit switch pusher;
  21. Column expansion;
  22. Column clamp button;
  23. Selecting controls for clamping and releasing the column

Design of radial drilling machine 2K52,2K52-1

  1. Base;
  2. Column;
  3. Barrel;
  4. Sleeve;
  5. Drill head;
  6. Electrical equipment

Kinematic diagram of the radial drilling machine 2K52

Base of radial drilling machine 2K52,2K52-1

The base is a rigid casting on which the plinth in which the column is installed is mounted. On the column there is a barrel with a sleeve and a drilling head.

On the base there are attached supports that serve to increase stability and align the surface of the slab in a horizontal plane.

Barrel of radial drilling machine 2K52,2K52-1

The barrel is a housing for the following assembly units: gearbox, switching mechanism, clamping mechanism, lifting mechanism and electrical equipment.

How does the machine work?

Here are the main details of the machine:

  • base;
  • Column;
  • frame;
  • barrel sleeve;
  • drilling head;
  • electrical equipment;
  • carriage.


Machine carriage

The body and sleeve are attached to the base, and a container for cooling liquid is attached to the end part.

The column is a large steel pipe, which is installed in the base and attached with two bearings. Electrical equipment and clamping mechanisms are also located there; it is worth knowing that clamps are not included with the original equipment, they must be ordered separately.

A densely shaped cast iron is the housing, which is the main part for the gearbox. It also has space for electrical equipment.

The sleeve is attached to the body part by means of four clamps. In the direction of this part, a carriage moves along with a drilling head.

The head itself consists of a spindle, a control device and a feed box.

The spindle is made of cast iron. Has a large range for drilling frequency.

Design of radial drilling machines

Each radial drilling group machine consists of:

  • hard base,
  • cylindrical columns (internal and external),
  • traverses (trunk),
  • drill head (spindle head),
  • electrical and hydraulic control equipment.

Main components 1 Base 2 pedestal 3 hydraulic pump motor 4 column 5 arm lifting/lowering tank and column clamp 6 spindle motor 7 arm lifting/lowering motor 8 arm lifting/lowering screw 9 Spindle head 10 arm

Kinematics

The main movements during drilling operations are the rotation and movement of the machine spindle quill. The kinematic chains that perform these movements are equipped with controls that allow the tool to be set to the required rotation speed and feed.

  • rotation of the movable column of a radial drilling machine,
  • vertical movement of the console (traverse),
  • fixing the traverse on the column at operating height,
  • fixing the spindle head on the traverse,
  • switching spindle speeds and quill feeds.

When processing parts on radial drilling machines, the coordinates of the center of the hole and the axis of the tool are combined by moving the drilling head relative to the stationary workpiece in the polar coordinate system. This system is characterized by two parameters: the angle of rotation of the traverse and the radius of the position of the spindle head on it.

Machining holes at an angle is only possible when the workpiece itself is installed at an angle using special equipment and devices.

Radial drilling machine Z30132

Stand with work table

The machine bed, combined with the working base (table), is usually cast from gray cast iron. It is designed to fix the entire machine on the foundation, install the column base with the traverse and the spindle head, as well as fasten the equipment and parts using the T-shaped grooves of the working base.

A workpiece of small dimensions can be installed on an attached box-shaped table, or directly fixed on a specially treated surface of the base (work table). Fastening the workpiece outside the working surface of the table is rarely used, because introduces an additional error into the processing accuracy of the product.

Rotary column

The column is mounted vertically on the machine bed and rotates around its axis relative to a fixed internal stand on roller bearings. The traverse is fixed to the column.

A mechanism for raising/lowering the traverse, driven by an electric motor, is mounted in the upper part of the column.

Traverse (console)

The console (arm or trunk) of the radial drilling machine is mounted directly on the column; it has a separate electric drive, moves up and down, and also rotates around a vertical axis together with the support column. Rotation, depending on the machine model, can occur either manually or using an electric drive.

A drill head with a working spindle is installed on the guides of the cantilever traverse. The traverse can be lowered or raised according to the height of the workpiece. Electrical equipment and hydraulic elements are mounted in a niche located on the reverse side of the sleeve.

Spindle head

The drill head (spindle head), mounted on a traverse, is structurally a separate power unit, having feed boxes, speed boxes, as well as mechanisms for setting the drilling depth.

In radial drilling machines, the spindle serves to fix the processing tool and transmit torque and linear feed to it.

The tool is inserted into the inner cone of the quill (Morse taper No. 4-6 or metric taper, depending on the model), and then coordinately oriented relative to the workpiece by rotating the console and moving the spindle head along it.

For operator convenience, all machine controls are located on the drilling head:

  • multifunctional steering wheel for moving the spindle headstock and spindle quill;
  • buttons for controlling the clamping/unclamping of units, turning on/off spindle rotation, emergency stop, turning on the work area lighting;
  • handles for selecting rotation speed, spindle feed, direction of spindle rotation, switching between manual and automatic feed.

Radial drilling machine z3050

The feed box is located between the spindle and the spindle motor; Rotation from the electric motor is transmitted through gears and friction couplings. The friction clutch allows you to quickly reverse when cutting threads, cut off the feed when the required drilling depth is reached, and protect the gearbox from overloads.

Specifications:

Basic machine parameters
Machine accuracy classN
The largest nominal drilling diameter in steel is 45, mm35
The largest nominal diameter of drilling in cast iron, mm
Range of cut threads in steel 45, mm
Distance from the spindle axis to the guide column (spindle overhang), mm290..1000
Maximum horizontal movement of the drilling head along the sleeve, mm710
The smallest and largest distance from the end of the spindle to the plate, mm1120
The smallest and largest distance from the end of the spindle to the table, mm15..630
Maximum vertical movement of the hose along the column (installation), mm
Maximum vertical movement of the table along the column, mm340
Speed ​​of vertical movement of the hose along the column, m/min
Angle of rotation of the sleeve around the column, degrees330
Slab surface size (width length), mm800 x 1500
Lift table
Table surface size (width length), mm450 x 800
Angle of rotation of the table around the column, degrees360
Table rotation angle around the horizontal axis, degrees10
Speed ​​of table movement along the column, mm/min314
Spindle
Maximum axial movement of the spindle quill (spindle stroke), mm325
Spindle end designation according to GOST 24644-81Morse 4
Spindle direct rotation frequency, rpm35,5..1400
Number of direct rotation spindle speeds8
Spindle reverse rotation frequency, rpm
Number of reverse spindle speeds
Limits of working feeds per spindle revolution, mm/rev0,1..1,1
Number of working feed stages6
Spindle movement by one dial division, mm1
Spindle movement per dial revolution, mm94,2
Maximum permissible torque, kgf*cm1800
Maximum feed force, kN8
Column rotation clampManual
Column Sleeve ClampManual
Drill head clamp on sleeveManual
Electrical equipment. Drive unit
Number of electric motors on the machine3
Main motion drive electric motor, kW2,2
Electric motor for hose movement drive, kW
Electric motor for table movement drive, kW0,56
Electric motor for column hydraulic clamping drive, kW
Electric motor for hydraulic clamping of the drilling head, kW
Coolant pump electric motor, kW0,125
Electric speed set motor, kW
Feed set electric motor, kW
Total power of installed electric motors, kW
Dimensions and weight of the machine
Machine dimensions (length width height), mm1850 x 800 x 2430
Machine weight, kg2100

Unit differences

Design features include:

  • It is easy to choose a model with different energy ratings for connecting to the network: standard 220, industrial 360 and non-standard 600 volts.
  • The spindle rotates over a wide range.
  • The system control is located on the front side of the device, this allows you to quickly switch between different options.

Technical characteristics of the unit:

  • Weight is 1 ton 250 kilograms.
  • Dimensions: length – 1 meter 76 centimeters; width – 92 cm; height – 1 meter 96 centimeters.
  • The power of the main engine for operation is 1.5 kW.
  • The cooling system is powered by a pump whose power is 0.125 kW.
  • The drilling diameter has a limit; it is 3.5 centimeters.
  • The spindle head moves along the sleeve within the range of 40–90 centimeters.
  • The machine rotates with a frequency of 60 to 1.6 thousand revolutions per minute.
  • Speeds for work: 6.
  • The number of working feed stages is 3.
  • Work table: 80 cm long and 63 cm wide.

The device rarely breaks down, so repairs are an infrequent task. The unit easily adapts to the dimensions of the room; the unit does not require special lighting or ventilation.

Mechanical components are used to brake and stop the spindle head.

The machine is easy to use, despite its apparent complexity. Before starting work, you should read the instructions for use.

CNC drilling machine 2р135ф2: characteristics

  1. The maximum diameter of parts to be processed should not exceed 35 mm.
  2. The maximum size does not exceed 24 mm.
  3. The maximum milling width does not exceed 60 mm.
  4. The processing process involves 6 tools.
  5. Spindle speed 12.
  6. The working surface has the following dimensions - 710x400 mm.
  7. The spindle speed ranges from 35 to 1600 per minute.
  8. The number of feeds along the Z axis reaches 18.
  9. Working feeds along the Z axis range from 10 to 500 mm per minute.
  10. The table and slide move at speeds of up to 7000 mm per minute, and during the milling process 2200 mm per minute.
  11. The caliper movement frequency reaches 4000 mm per minute.
  12. In terms of dimensions, the machine has the following parameters: 1800 mm by 2400 mm by 2700 mm.
Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]