TS-6010S Tabletop grinding machine diagrams, description, characteristics

the TS-6010S sharpening machine is the company Shturm GK, LLC Moscow. Website address: https://sturmtools.ru

The company appeared on the Russian market in 2003. Tool production is located in Chinese factories.

In total, the company’s product portfolio includes four brands, which allow it to fully cover the middle and low price segment of the market for professional and household instruments:

  • Sturm
  • BauMaster (Baumaster)
  • Union
  • Energomash

Energomash TS-6010S tabletop sharpening machine. Purpose, scope

This machine is a “hobby” class machine and is intended for individual (household) use, i.e., due to its design features and technical characteristics, the machine is not intended for use in production.

The machine is designed to operate from a single-phase alternating current network with a voltage of 220 V ± 10% and a frequency of 50 Hz.

The machine is intended for operation in the following conditions:

  • ambient temperature from +5 to +35 °C
  • relative air humidity up to 80% at a temperature of 25 °C

Energomash TS-6010S Multifunctional sharpening machine

Delivery

  • Express delivery
  • Post office
  • Transport companies
  • Belarus and Kazakhstan

Express delivery.

Moscow (within the Moscow Ring Road) when ordering before 15-00 on the next day. day*, later - on subsequent days. When ordering on Fri after 15-00, delivery on Tue.

Mon - Fri from 10 to 18 - any 3-hour interval and from 18 to 23. Sat from 10 to 16 and from 15 to 18. Sun - closed.

  • up to 3 kg — 250₽
  • from 3 to 5 kg — 270₽
  • from 5 to 10 kg — 320₽
  • from 10 to 15 kg — 415₽
  • from 15 to 20 kg — 475₽
  • from 20 to 25 kg — 565₽
  • from 25 kg — from 600₽

Moscow region up to 50 km: when ordering before 15-00 on the next day. day from 11-00 to 18-00 working hours. days. When ordering on Fri after 15-00, delivery on Tue.

  • in addition to tariffs in Moscow: 55₽ / 5 km.

St. Petersburg (within the Ring Road) when ordering before the 15th, delivery in a day*, after the 15th - on the following days. When ordering on Fri after 15, delivery on Wed. On weekdays from 10 to 21 - min. time interval 3 hours (from 18 to 21 using double tariff). On Sat from 10 am to 6 pm there are two intervals: before 2 pm and after.

  • up to 3 kg — 250₽
  • from 3 to 5 kg — 300₽
  • from 5 to 10 kg — 380₽
  • from 10 to 15 kg — 485₽
  • from 15 to 20 kg — 600₽
  • from 20 to 25 kg — 750₽
  • travel outside the ring road up to 50 km: Mon - Fri from 10-00 to 18-00 - additional 55 RUR / 5 km.

! *subject to availability in stock. Some products are delivered to order in 2 to 7 days. Terms are specified when placing an order.

You can calculate the cost of delivery here >> | You can see the distance from the Moscow Ring Road / Ring Road here

  • orders weighing up to 15 kg are delivered to your door
  • orders weighing over 15 kg are delivered to the entrance
  • Maximum courier waiting time is 15 minutes
  • delivery to shopping centers is carried out to the main entrance

Before delivery, an SMS is sent to the client with the courier’s phone number and order number; for convenience, the client can independently contact the courier. The next day, 30-60 minutes before delivery, the courier calls the recipient and finally agrees on the delivery time. If the buyer cannot be reached during the day, the order is transferred to the next day. Upon receipt of the order, the buyer checks the contents and integrity of the goods and pays the courier. The courier does not check the operation of the goods and does not provide consulting services.

Upon receipt of the order, the buyer must check it for damage, completeness and functionality (except for gas tools). In accordance with Art. 459 Part 1 of the Civil Code of the Russian Federation (also Article 211 of the Civil Code of the Russian Federation), claims regarding the quality of goods delivered to the buyer can be made only until the goods are transferred to him by the seller (forwarder). After receiving the order, claims regarding external defects of the goods, their quantity, completeness and presentation are not accepted.

The procedure for transferring goods does not involve testing them and waiting for the courier to receive results. The courier most often is not an expert in the equipment purchased in our store and the result obtained during testing cannot be qualifiedly assessed. Most technically complex products require you to read the instruction manual before using them. In the winter season, the transfer of goods is associated with a sharp change in temperature, so the immediate switching on of electronic equipment is a violation of operating conditions.

Post office.

  • You can calculate the cost of postal services using the Russian Post calculator.
  • The order is sent only after full payment, we do not ship cash on delivery!
  • Standard postal items are accepted weighing up to 10 kg, measuring no more than 425*265*380 mm.
  • The agency fee for non-standard shipments increases by a factor of 1.5 (if the sum of the three dimensions of the shipment does not exceed 250 centimeters, and the maximum side length does not exceed 160 centimeters).
  • The agency fee for heavy shipments increases by a factor of 1.5 (for shipment weights from 10 to 20 kg inclusive in standard packaging with a maximum size of 425*265*380 mm).
  • The agency fee for a non-standard (large-sized) item increases by a factor of 2.5 (if the item weighs from 10 to 20 kg, and the sum of the three dimensions of the item does not exceed 250 centimeters, and the maximum side length does not exceed 160 centimeters).
  • The maximum possible weight of the item is 20 kg, and the sum of the three dimensions of the item does not exceed 250 centimeters, and the maximum side length does not exceed 160 centimeters.

After receiving payment to the account, we ship the order on the same day or the next (payment after 15-00), if the goods are made to order, the terms increase, in this case. negotiated separately. After sending, tracking is sent every other day in the morning on weekdays. For example: on Mon. sent on Wednesday morning - tracking on Thursday. sent to Mon. — tracking.

Transport companies.

The order is sent after full payment for the goods and delivery to the TK terminal in Moscow (according to delivery rates in Moscow), within 1~2 working days. Delivery to TC Business Lines is free. The services of the transport company are paid by the buyer upon receipt of the order. We send the following. transport companies:

  • TC Business Lines (free to the terminal)
  • PEK (First Expedition Company)
  • TK Baikal Service
  • ZhelDorExpedition
  • MAS Handling
  • Ozone
  • O-courier
  • TC Veteran-Transit
  • TK LLC Group ST
  • Energy

Belarus and Kazakhstan.

In Belarus and Kazakhstan there are representative offices of transport companies PEK and Business Lines or others listed above; shipping through them is possible.

EMS Russian Post. You can place an order and we will deliver it by EMS Russian Post after prepayment of the order. The delivery cost is calculated automatically during the ordering process and is specified by the manager.

! Important. Upon receipt of the order, the buyer must check it for damage, completeness and functionality (except for gas tools). In accordance with Art. 459 Part 1 of the Civil Code of the Russian Federation (also Article 211 of the Civil Code of the Russian Federation), claims regarding the quality of goods delivered to the buyer can be made only until the goods are transferred to him by the seller (forwarder). After receiving the order, claims regarding external defects of the goods, their quantity, completeness and presentation are not accepted.

General view of the sharpening machine TS-6010S

Unit technical characteristics

The Energomash TS-6010S sharpening machine is designed for household work. Based on this, the manufacturer equipped its unit with the following characteristics:


  • Power. Due to the fact that the device is intended for home use, its power is 100 W.

  • Nutrition. Requires 220 V mains power.
  • Rotation frequency. The electric motor provides rotation at 6700 rpm.
  • Dimensions. The machine has dimensions of 18x20x15 cm and a weight of 1.8 kg; for the same reason, the machine requires fixation on the desktop.
  • Characteristics of the grinding wheel. Grit size – 180.
  • The diameter of the drill being processed is from 2 to 10 mm.
  • Blade width. The machine allows you to process the working edge on parts with dimensions from 6 to 51 mm.

Location of components of the sharpening machine TS-6010S

Specification of components of the sharpening machine TS-6010S

  1. Switch
  2. Sharpening unit for chisels, chisels and blades
  • 2a. Narrow guide for chisels and chisels
  • 2b. Magnets
  • 2c. Protection
  • 2d. Angle adjustment knob
  • Grinding wheel
  • Drill sharpening unit
  • 4a. V-shaped guide
  • 4b. Drill sharpening unit
  • 4c. Drill bit (not included)
  • Block lock
  • Mounting hole
  • Knife and scissors sharpening unit
    • 7a. Knife sharpening slot
    • 7b. Slit for sharpening scissors
  • Power block
  • Grinding machine "Energomash TS-6010S"

    This unit belongs to the universal type of sharpening machines. With its help, you can return many different cutting tools to work:

    • scissors;
    • knives;
    • chisel;
    • blades for planes made of various grades of steel, including HSS.

    High quality sharpening is achieved by using grinding wheels with a grain size of 180. Correct placement of the tool in the machine is ensured by the use of a magnet. Due to the fact that the equipment body is made of aluminum, its service life and reliability are significantly increased.

    Technical characteristics of the sharpening machine "Energomash TS-6010S"

    The role of the power plant in this unit is performed by an asynchronous electric motor with a power of 100 W, operating from a mains voltage of 220 V and providing a grinding wheel speed of 6,500 rpm.

    The dimensions of the grinding wheel used in the machine are 49.3X10.2X7.5 mm, and its grain size is 180. The diameters of drills that can be sharpened using this unit range from 2 to 10 mm.

    The warranty period for the operation of the Energomash TS-6010S sharpening machine is 14 months.

    Operating rules for the unit

    The Energomash TS-6010S machine is equipped with three working units for sharpening:

    • blades, chisels and chisels.
    • scissors and knives.
    • drill

    The first unit is installed on the power unit, after which the tool being processed is placed on the support and fixed with magnets. The operator adjusts the sharpening angle, moves the edge of the blade to the grinding wheel and turns on the electric motor. The support with the blade attached to it should be smoothly moved across the grinding wheel, pressing lightly on it. At the end of the sharpening process, the power unit must be turned off , and the tool can be removed from the machine only after stopping the grinding wheel.
    The edge of the blade should be finished using a sanding block. The second unit is installed on the power unit. The knife being processed is located in a special slot and as soon as its blade touches the surface of the grinding wheel, it must be pulled, slightly pressing towards the tip across the grinding wheel. After this, the knife is removed and reinstalled with the other side of the blade towards the circle covered with abrasive material. The procedure is repeated.

    As for the scissors, their blades are sharpened using the same technology, but one at a time until the cutting edges become sharp and even.

    The third node is also located on the power block and is securely fixed there. Its main part is a clamping device into which a drill is installed in a certain way and sharpened using a special technology using a grinding wheel. At the end of the work, you should check the quality and uniformity of sharpening of each drill groove.

    Design and main functions

    Energomash TS-6010S was able to achieve high technical parameters due to its original design:

    • The basic shape of the machine is cube.
    • An electric motor is installed inside it.
    • A sharpening stone is installed on the drive shaft of the electric motor.
    • The device is equipped with a set of accessories for processing a variety of tools.
    • On the front side of the body there are special mounting holes.
    • There are additional places on the sides for attaching attachments.
    • Can be configured even by an inexperienced user thanks to simple and intuitive adjustments.

    This machine is designed to process three main items:

    • Drill sharpening To process the cutting edge of the drill, the machine is equipped with a special V-shaped guide. A drill is installed in this nozzle and fixed. The operator only needs to move the drill to the sharpening stone, without paying attention to the angle of inclination of the workpiece.
    • Knives and scissors. The manufacturer does not provide the ability to set a custom sharpening angle for the cutting edge, so the device can only form the primary edge of the cutting tool. For more accurate and professional finishing, a specialized unit will be required.
    • Chisels, chisels and blades. The most extensive part of the machine’s functionality is the equipment, which helps sharpen these tools. Its main difference is the angle adjustment mechanism. To fix the tool, this attachment is equipped with a magnet. The equipment and its fixation units are the weak point of the Energomash TS-6010S. This can be explained by the fact that they are made of fairly weak plastic that cannot withstand the increased pressure created by the operator during operation, so you should not press too hard on the working part to avoid breakage.

    Instructions and tips for use

    During operation, more experienced users recommend dismantling unused equipment that is not used during operation. This will minimize the possibility of incorrect installation of the part relative to the abrasive disc.

    Abrasive discs have their own resource, which will quickly end with active use. Therefore, it is worth purchasing spare parts immediately.

    At the time of purchase, it is worth checking the package contents ; unscrupulous sellers may disassemble the box and try to offer you to buy the missing parts for an additional fee. Carry out an external inspection for damage, play and other defects upon purchase. Check with the seller for warranty coverage, and when purchasing, check that the warranty card is filled out correctly; the factory warranty is 14 months, and the recommended price is 3 thousand rubles.

    Read the operating instructions for the sharpening machine during operation and maintenance. Additional grounding is not required; this is justified by additional insulation of conductive elements inside the housing.

    During sharpening work, do not violate safety requirements with electrical equipment. Use protection for your hands, eyes, face and body. Flying sparks and chips can cause serious injury.

    Rating
    ( 1 rating, average 4 out of 5 )
    Did you like the article? Share with friends:
    For any suggestions regarding the site: [email protected]
    Для любых предложений по сайту: [email protected]