Wood carving. Pictures, photos of products, sketches, drawings, decorative figures

Wood carving is an amazingly beautiful and very popular type of hand-made wood processing these days. The carved interior details captivate with their magnificent appearance and reflect rich national traditions.

Creative people who are simply itching to do something very interesting and useful should pay attention to wood carving. Girls and women may think that this is only a man's activity. And they will be wrong, because there are no fewer women woodcarvers than men.

Tatyana Boeva ​​from Kamchatka

Tools for work

In stores you can purchase various professional tools and multifunctional woodworking machines. They make work much easier and are convenient and safe to use. However, knowing how to use hand tools is more important. Every beginning woodcarver should learn to work with simple chisels, saws and planes.

These skills will help you in the future:

• master professional machines faster;
• correct inaccuracies;
• make miniature patterns.

Experienced craftsmen do not recommend buying ready-made sets of tools for manual cutting. They are expensive, but do not always differ in quality.

A set may have a good knife but bad chisels, so it's better to buy each tool separately and put together a truly useful set that will last for several years.

The most important tool for working with wood is a saw. With its help, you can separate even pieces of the desired size from a solid block.

Suitable:

• hacksaw;
• bow saw;
• jigsaw

It is advisable to purchase several types of saws with different tooth sizes. The condition of the paintings must be carefully monitored. Saws should always be sharp and the blade should be well tensioned.

You should also buy a plane . A novice craftsman can buy a hand tool with a cutting surface of medium width. When you gain experience, you will need a jointer and a scraper. They are needed for more thorough leveling of wooden surfaces.

To work with small parts you need chisels . The set should include tools with wide, pointed edges, as well as narrow and thin ones. Blades can be straight or beveled. They should always be sharp, so chisels will have to be sharpened frequently. For this purpose, you can use sandpaper or a special machine.

Working with blunt tools is dangerous because the blade will not penetrate the wood as deeply as required. This increases the risk of the tool “jumping off”, which is dangerous for the carver. He could be seriously injured. In addition, the carving made with such a tool will turn out crooked, and the work will take more time and effort.

In the table you can see what other tools may be required and why:

There are many other wood carving tools available. When a novice master gains experience, he will be able to independently determine which chisels, knives or saws he needs and what is more convenient to work with.

Preparing sketches and transferring drawings

A complex geometric composition requires preparing a drawing and creating a preliminary sketch on paper using drawing tools.

1. Preparatory activities consist of several stages, the first of which is drawing a sketch on paper.
2. This is followed by sanding the edged piece of board or object that will be decorated with geometric patterns.
3. You should not sand the wood too thoroughly; it is enough to remove irregularities and chips with sandpaper so that these defects do not interfere with the careful execution of carvings that require precision.
4. You can transfer the pattern onto the board using carbon paper or an awl with a wooden handle.
5. Each cell, bounded by contour lines, becomes a fragment to create recessed edges, which together create a complex geometric design.

Tips for choosing wood

Professionals divide wood into 3 types:

• soft;
• hard;
• superhard.

Beginners should give preference to the first 2 options. Soft wood is pliable. It is easy to cut small parts from it, forming beautiful patterns. Hard materials are a little more difficult to work with, but they are more durable. Figures made from such wood do not dry out over time and do not burst.

It is easy to work with the following types of wood:

• spruce;
• chestnut;
• fir;
• pine;
• willow;
• Linden;
• poplar;
• alder;
• beech;
• birch;
• aspen;
• ash;
• elm.

Expensive and high-quality furniture is made from super-hard wood. It is difficult to work with this material manually; large machines are often used for processing, so this wood is not suitable for carving.

Selecting the right wood

The quality of work largely depends on the type of wood from which the carving base is made. Depending on the type of wood, its fibers can be soft and easily peeled, like those of spruce and pine, or they can be hard and uniform, like those of birch, cherry or beech.

Oak consists of stripes formed by annual rings, which vary greatly in softness, so the precise patterns on it will look less neat than on a board made of linden or ash.

Carver's workplace

Professional carvers work at a workbench. For beginners, you can limit yourself to a tabletop. It should be stable and wide. The height of the table is adjusted individually for the master. In order not to strain your back and feel comfortable, you should choose a tabletop that is waist-high, but not higher.

The countertop needs to be wiped regularly and its condition monitored. When working, knives often slip and stick into the table, which creates nicks that need to be sanded down. To minimize damage, you must follow the rules for using the countertop. You cannot throw sharp tools at it, chop with an ax or hammer in nails.

To work you need good lighting. Installing a tabletop near a window is not enough. You will need 2-3 more lamps that will illuminate the work area from different sides. The lamps should be installed above the carver's eyes so that they do not blind him. You can purchase lighting fixtures with flexible legs that can be tilted in any direction.

Types of carving and technique

Types of wood carving are divided into several groups:

• contour;
• geometric;
• flat-notched;
• sculptural;
• end-to-end;
• embossed.

Each technique has its own characteristics, which you can read about later in the article.

Contour

Contour threads are characterized by narrow recesses with 2 edges. They are made shallow and carried along the entire product. The main patterns are elements of living nature, for example, plant leaves, inflorescences, berry bunches, as well as animals and birds. The picture that is obtained thanks to this technique visually resembles engraving. All lines are rough, with clear edges. Light and shadow remain undefined.

Experienced craftsmen prefer to mix this technique with other types of carving, for example, geometric and flat-relief. This style also goes well with many traditional paintings.

Pure contour patterns, without collaborations with other styles, look good only on small wall panels. Such patterns are made using chisels and a knife with a beveled blade. The technique of contour carving is simple, but in order to decorate various products with it, you need artistic experience and skillful use of tools.

Geometric

This type of carving is one of the easiest to perform. The patterns consist of indentations of different sizes, which have from 2 to 4 edges.

Together they form various geometric shapes:

• triangles;
• diamonds;
• circles;
• rectangles.

This technique is used to decorate furniture and also create unusual-looking kitchen utensils, for example, hot pads. For work, they use the simplest set of tools: knives, chisels and cutters.

Flat-notched

Another simple wood carving technique that requires only a knife with a beveled blade. The peculiarity of flat-pit carving is the smooth surface of the background. The recesses in the wood are made shallow. The lines are smooth, but have sharp edges.

The finished drawings are visually similar to those made using the contour technique. They also do not have a clear division into light and shadow. The main patterns are elements of living nature, such as trees, flower buds and animal silhouettes.

Sculptural

This is one of the most difficult types of wood carving. It differs from previous techniques in that the image is not flat, it is three-dimensional. Sculptural carvings include three-dimensional figurines of animals, people and divine idols.

Sculptural wood carving

In the Middle Ages, such carvings were used to decorate the roofs of rich houses, decorate the inside of rooms, and place large wooden figurines on the bows of ships. Currently, sculptural carving also refers to decoration.

Wood is shaped with more than one tool; more often than not, several sets are used. Learning to work with this technique will require a lot of time and patience.

Through

This type of thread has several alternative names: through, openwork and sawn. The resulting pattern resembles thin lace. This effect is achieved by sawing through sanded boards.

The peculiarity of this technique is the complete or partial removal of the background. Craftsmen use this wood processing technology in various design options. Through carvings decorate the frames of windows and doors, as well as cornices. Often such wooden patterns can be replaced on stair railings.

This technology is also used for small decorative elements, for example, for boxes, picture and mirror frames and caskets.

Embossed

This technology is similar to sculptural carving in terms of complexity. On a flat background, craftsmen carve convex, three-dimensional images. These can be figures of animals, plants and even human portraits.

Relief carvings are divided into 2 groups: bas-relief and high relief. In the first version, the ornament turns out to be convex to more than half the thickness of the main workpiece. In the second case, the pattern is made very voluminous. All lines rise above the background and have smooth curves.

Precautions during operation

Before you start getting acquainted with wood carving, you need to learn about safety rules. The entire instrument is very sharp. They can easily get hurt, and sometimes you can get so seriously injured that you end up with disability.

What needs to be done to reduce these risks:

1. Install the countertop securely and firmly. The table should not sway from side to side or move around the floor.
2. The workpieces should be secured to the table with special tools - clamps. Only they are able to reliably fix the part. Any other available materials are not suitable for this purpose.
3. Lamps and lamps should not blind the carver. They need to be placed so that the tabletop is well lit and no shadow falls from the master.
4. When sharpening chisels and knives, you should wear gloves and safety glasses. Small chips can get into your eyes, and the knife blade can accidentally slip off the machine and injure your hands.
5. The quality of sharpening of any tools should be checked on a special whetstone, and not with your fingers.
6. When working with cutting tools, you should hold them away from you, and also make sure that your other hand is at a safe distance from the knife.
7. There should be no foreign objects in the workplace.
8. After each cutting stage, you need to remove chips from the table using special brushes. If too much debris accumulates, a sharp tool may get lost underneath it, and when cleaning, it will stick into your hand.
9. All knives and chisels should have a place. Experienced craftsmen recommend placing a jar on the table in which the carver will put away the tools and take them out when necessary. When the work is completed, all accessories must be placed in places for permanent storage.
10. When using electrical appliances, it is important to ensure that the cord does not become tangled or twisted.
11. You cannot plug several devices into an outlet at once. Many wires on the floor can become intertwined. It's easy to trip and fall on them.

Wax mastic is often used for work. It should be heated on an electric stove, but not over an open fire.

It is unacceptable to place heating elements where chips will fly. It ignites quickly. Wood blanks smolder at a temperature of 214 degrees, then begin to burn, so it is important to monitor fire safety.

The workshop should always have bandages, cotton wool and disinfectant solutions for the skin. Even professional craftsmen are not immune from accidental injuries. Wounds need to be treated as quickly as possible. If the damage is serious, you should postpone work until complete recovery.

Stages of woodworking

Wood carving (pictures depicting different technologies will help beginners understand how to work with wood correctly) always begins with an idea. The master comes up with patterns and makes a schematic sketch on paper, which he then transfers to a wooden surface using a simple pencil or marker.

He then carves out the rough design, then cuts off the corners and makes the lines smooth. Processes the background, polishes all the details and varnishes the finished product.

Further in the article you can read a description of the stages of work in different techniques.

With house carving

Wood carving (pictures are needed to correctly represent the basics of the technology) of this type is similar to the through technique. The master makes through cuts in the workpiece, completely removes the background and leaves only openwork patterns. Such carvings decorate window frames, doorways and roofs of houses.

The work is carried out in 3 stages:

1. Choosing a style . All patterns must be in harmony with each other, so the master first selects suitable stencils. Then he transfers them to the workpieces.
2. The background is removed using a drill and jigsaw. The ornament is carved by hand using chisels and knives.
3. The finished work is sanded and varnished.

For house carvings, hardwood is chosen. It is not prone to rotting and delamination, so it can last more than 20 years.

Carved wood decor with three-dimensional carvings

Wood carving (the pictures show the procedure for working) with convex patterns is carried out in 6 stages.

They can be examined using the example of making a large brooch with images of mountains:

1. The master cuts out a round blank and transfers the sketch onto it.
2. Using knives and chisels, he carves small indentations along the drawn outlines.
3. Using a special knife, the carver gives rounded outlines to the patterns and removes sharp corners and serifs.
4. Sands the product using sandpaper of different grain sizes and an abrasive sponge.
5. Paints the product with paints.
6. After complete drying, treat the craft with wax mastic.

Soft wood is suitable for such work. It is easier to create smooth contours and convex elements.

With geometric wood carvings

Wood carving (pictures will help you make the markings correctly) with geometric carvings is quite simple to perform. Most of the time is spent on creating sketches and markings.

Using the example of making a box, we can consider 5 main stages of work:

1. First you need to think about the location and shape of the patterns on each wall of the box, as well as on the lid. You will need to make a schematic drawing.
2. Then the product is lined and even squares are drawn on all sides.
3. The cells make up the intended pattern.
4. Starting from the edges and moving towards the center, the pattern needs to be cut out on each side of the box.
5. At the end, the product is sanded with sandpaper. Periodically sweep away the crumbs with a special brush.

Products that will be actively used are varnished by craftsmen. You can choose a colorless coating or a colored one that imitates the natural shades of other wood species.

With slotted

This is a through carving, where the background is completely removed using a jigsaw, but the pattern remains.

The work is carried out in 4 stages, which can be considered in more detail using the example of making a book stand:

1. The master selects a sketch, transfers it to paper and pastes it on top of a wooden blank.
2. Drills holes. Where the jigsaw blade will be inserted. Then he cuts out the pattern, removing the background.
3. Sands the product with sandpaper of different grits.
4. Connects the parts of the stand with glue and covers with colored varnish.

For products with slotted patterns, it is recommended to use hardwood.

Transition to complex patterns

Having mastered cutting straight lines, you can gradually move on to using a cutter to depict smooth patterns and complex combinations of various shapes. Uniquely complex compositions are created from single figures precisely distributed over the surface of the tree, each of which is a simple geometric shape.

The effect of the image is achieved by careful carving, highlighting the edges that create the main pattern on the surface, while the carved recesses emphasize them with shadow.

Gradually gaining experience and accuracy in working with cutters, you can become a good craftsman and professional in the field of artistic carving, which is currently used to decorate furniture, interior details and facades.

Geometric carving master class

This is one of the most popular types of carving. Professional carvers advise beginning craftsmen to use this technology for their first works.

What tools and materials will be needed:

• harvesting from soft wood, such as linden;
• knife with a beveled blade;
• a simple pencil;
• eraser;
• ruler;
• compass;
• fine grit sandpaper.

Before work, you need to inspect the workpiece and sand it if necessary.

Sketching a pattern

You can download pictures for stencils or draw them yourself. First, the blanks are made on thick paper, and then transferred to a prepared wooden board for carving. To prevent the stencil from bending when tracing, it can be soaked in acrylic varnish and dried.

You need to trace the template slowly. First, draw all the lines along the contour, then highlight the inner pattern.

Cutting out patterns

You need to cut out patterns from the edge, gradually moving towards the center. The knife should be positioned at a 45 degree angle and apply light pressure. You need to remove the layers one by one. If you don’t have enough strength, you can press with both hands, the main thing is that the blade is located away from the cutter, and not vice versa.

In places where the lines are smooth, for example, where there are circles, you need to cut shallowly. It is better to go over one place several times, removing 3-4 layers one by one, than to make a sudden movement and ruin the drawing. When the carving is finished. Use an eraser to remove all markings.

Grinding and impregnation of the finished product

The finished work must be cleaned of dust and crumbs with a special brush. Then take sandpaper and carefully grind off all sharp corners and remove burrs. If you plan to use the product frequently (pick it up, move it from place to place), then it needs to be impregnated with varnish in 2-3 layers.

For decorative crafts that will decorate the room, impregnation with wax mastic is sufficient.

Hardwood carving

Hand carving on hard wood can be done by craftsmen with extensive experience in this field. But the result of such work turns out to be the most expressive and durable, especially if the ornament decorates a household item, interior detail or the facade of a wooden house.

Beginner carvers try their hand at tree species such as alder, linden or pine. Elements of geometric patterns are smooth without much stress on the part of the performer.

Linden is the most popular material among specialists, as it has a fine-fiber, uniform structure and is quite easy to cut.

Its neutral light shade allows you to tint finished products to match more expensive types of wood.

Master classes on creating wood carvings

Before work, you need to prepare all the necessary tools and materials for marking, cutting and grinding. The production of any wooden figurines begins with a rough blank. This is a rough piece of wood that is marked and shaped into angular shapes. There is no need to remove all the excess, just cut off large corners and burrs.

One of the most popular three-dimensional figures, the production of which first of all novice craftsmen try to master, is a bear.

To make the product beautiful, you must follow the following algorithm:

1. On a walnut block 10x5 cm, 5 cm thick, a sketch of the future figure is drawn.
2. Trim off the excess and do rough processing with a knife.
3. Using a pencil, draw the back side of the figure and its upper part.
4. Using chisels of different thicknesses, gradually remove several layers. Each time the thickness of the chips should decrease.
5. Using a small knife, they work out the texture of the fur, forming other small details, teeth, eyes, claws.
6. Sand the product with fine sandpaper, then polish and varnish.

Walnut is a hard wood. For the first experiment, you can use pine or linden.

Beginners are often interested in silhouettes of sitting animals, such as foxes or cats. They can be made by analogy, with minor changes.

Procedure:

1. Select a sketch and transfer it to the workpiece.
2. Saw off excess material.
3. Carry out rough processing, observing the main contours.
4. Then start working out the details. Needs to be specified. Where the animal will have paws, head, torso and tail.
5. Cut out the shape of the muzzle, mark the location of the ears.
6. Sand the product to make its contours softer.
7. Use small tools to make details clearer.
8. Sand the work again with fine sandpaper.
9. Using a small knife, cut out the texture of the fur, marking the eyes, teeth and other small details.

At the end, all that remains is to do the final sanding and saturate the finished product with varnish.

Wood carving can be learned in a short time. In the process of work, you need to follow safety rules, as well as follow the action algorithms consistently. Step-by-step master classes and pictures with ready-made stencils will help beginning craftsmen.

Application of skills in the interior

Not only figurines can be cut from wood, but also kitchen utensils, pieces of furniture, boxes, and you can create a unique decorative panel. The variety of options is endless. Most often, cutting boards, caskets and storage boxes are decorated with wood carvings. Twisted patterns look great on staircase balusters. And antique lovers are still hunting for carved furniture.

Wooden kitchen appliances are very popular - environmentally friendly and beautiful.

It will take a long time before you can learn wood carving at a professional level, but even as you learn, you will be able to create beautiful and useful work. And having mastered the craft completely, you will be able to create a unique design for any thing, bringing comfort, beauty and originality to your home. This useful hobby will help you discover your own talent and even find additional income.