Egoza barbed wire SBB AKL, SBB ASKL, PBB

A comprehensive perimeter protection system combines various types of security systems and engineering structures, thanks to which it allows you to achieve maximum effect when protecting a territory or object. Complex perimeter protection systems use modern Egoza barbed barriers - flat and spiral security barriers, barbed mesh and Egoza barbed wire fences, as well as durable fences of various types. All this is complemented by security alarm systems with an extensive network of sensors and a high-quality video surveillance system, which allows you to see what is happening in problem areas of the facility’s security perimeter.

What kind of fences are installed on?

“Egoza” can be installed on any structure, but, for example, wooden picket fences and other easily damaged structures are rarely supplemented with barbed wire on top. In such cases, it is often attached to the outside of the fence or laid on the ground.

Photo No. 1: Egoza on a wooden fence

From above, a safety barrier is most often installed on fences, which are easier to climb over than to break. It is especially important to mount the Egoza on a concrete fence or other permanent structure.

Photo No. 2: Egoza on a concrete fence

Note! There are a large number of ways to protect a fence made of corrugated sheets or other material using Egoza barbed wire. In the diagram below you will find the most popular installation options.

Image No. 1: methods of attaching Egoza to fences

Egoza barbed wire

Egoza wire is a lightweight fence that transmits light well.
This is the undoubted leader in the domestic market of lightweight structures. You don’t have to worry about the quality of the material, because it is produced in the capital of metallurgy - Chelyabinsk. But this does not mean that you should thoughtlessly give preference to Egoza. First, you should carefully study the characteristics, types of material and become familiar with the installation method.

OLYMPUS DIGITAL CAMERA

Advantages and disadvantages of installing Egoza on a fence

Installing Egoza on a fence is a great way to protect your territory from intruders. Dismantling a correctly and securely fastened “thorn” requires serious time investment.

In addition, the following advantages of installing a barrier structure on a fence are highlighted.

• Possibility to make an energized fence. This will significantly increase security.
• Reliability. "Egoza" is resistant to corrosion. The service life of the “thorn” manufactured in accordance with GOST is more than 25 years.
• Availability. Anyone can afford to buy a spiral or flat safety barrier.
• Easy to install. Installing Egoza on the fence is quick.
• A large number of installation options and application purposes. For example, for additional protection of the territory and fencing from animals and intruders, you can stretch the Egoza along the ground on one or both sides of the fence.

The disadvantages of installing Egoza include only deterioration in the appearance of the fences.

Composition of a typical comprehensive perimeter defense system

A comprehensive perimeter defense system include many elements. All elements included in a comprehensive security system can be divided into engineering and electronic systems. Engineering perimeter protection systems perform the functions of limiting or preventing access to the protected area. Fences and barriers of various types and designs are used as engineering systems, as well as barbed wire, reinforced Egoza barbed tape, Egoza barbed wire barriers, as well as their combinations in various combinations. Security alarm and video surveillance systems are also a necessary element of a modern comprehensive perimeter protection system. Alarm systems allow you to timely detect attempts to enter a protected area, and video surveillance systems allow you to more accurately identify and classify events occurring in a protected area. Thanks to the availability of highly effective engineering tools and the development of electronic security systems, a modern comprehensive perimeter protection system allows you to achieve the maximum level of security in the protected area.

How to properly install Egoza on a fence (useful tips)

Correctly installing the Egoza on the fence is half the battle; it is also important not to get hurt during the work. Therefore, safety precautions should be observed.

• Installation must be carried out in thick protective clothing, as you can seriously cut yourself. Particular care should be taken to protect your hands and wrists. Thick gauntlets designed for welding work are best.
• The support (stepladder or sawhorse) should be as reliable as possible. If you fall from it directly onto the wire, there is a high risk of serious injury.
• If possible, use the help of one or two partners.
• When installing a protective barrier on a metal fence, the brackets can be welded to the posts. It will be more reliable this way.

Description

A thorn is one of the types of protective fencing. The manufacturing plant is part of the group. Among the plant’s regular clients are government organizations, nuclear, electrical and thermal industry facilities.

When manufacturing wire, technology is used that takes into account the level of responsibility. After all, such fencing is used to protect special-purpose objects. Often, ordinary citizens use barbed fencing to create security for their territory.

This type of fence also encloses the walking area of ​​farm animals. The main goal here is to prevent animals from leaving the range.

As for a person, for him a razor fence performs the following functions:

• Prevention of unauthorized access to private territory;
• Protection from vandals;
• Restriction of entry into the territory - landfills, industrial reservoirs;
• Fencing the area with working mechanisms.

Fidget is a wire-tape structure. Pointed piercing-cutting edges stick out in different directions. If they dig into the warmth of a person or animal, they will cause painful irritating sensations. Because of this, no one will want to climb further.

The fence consists of:

• Flexible metal strip with sharp edges;
• Metal core.

Low carbon steel is used in the manufacturing process. The shaped parts are cut out on a press.

Features of barbed wire fences on the site: pros and cons

A barbed wire fence is an excellent option for those who want to secure their territory 100%. Even adding a “thorn” over the spans of the fence will help achieve the desired effect. Not a single thief would want to be caught in the tenacious spikes of such a wire, not to mention tactless neighbors or curious passers-by.

Fencing made of corrugated sheets with a razor along the top edge

Types of wire

“Spikes” used for fences and enclosures can be of different types. For example, there are galvanized or steel-reinforced wires that have a diamond pattern or tape spikes. Let's look at each type of this material separately.

Barbed thread

Thread is one of the popular types of barbed fencing. It has a galvanized wire at the base with a cross-section of slightly less than 3 mm. The “spines” on it are formed by steel segments twisted along the entire length; they can be double or single.

The thread can be:

• homogeneous;
• corrugated.

The first option is preferable, since it is much easier to make the fence yourself.

Such spikes are a reliable protector of the site from uninvited guests.

EXAMPLE OF ORDERING DESIGNATION

SBB 500/15/5/3 AKL OTs:

SSB - spiral safety barrier

500 — diameter of the spiral barrier in mm

15 — bay length

5 — number of turns per 1 linear line. m barrier

3 — the number of points of attachment of the coils to each other around the circumference of the barrier

AKL - made of reinforced stabbing tape

OTs – galvanized

The protective properties of a spiral safety barrier (SSB) depend on the number of turns and attachment points; with an increase in these parameters, the density and resistance of the barrier to physical impacts on it increases.

RANGE OF SERIALLY PRODUCED EGOZA SPIRAL BARRIERS

READ MORE: Narcissus Ice King: 4 tips and 9 types

MAIN PARAMETERS OF SBB EGOZA

Installation of metal and plastic fencing

The manufacture and installation of stainless steel and plastic fencing, as well as fences of any type, is a complex process, the implementation of which must be based on regulatory and design documentation.

In this case, depending on the functions performed, the material, type, as well as installation methods or features are determined. For example, to ensure the safety of work, inventory fences of the installation horizon are used.

In the photo - installation of a metal fence

Installation of metal fences

Installation and assembly of metal enclosing structures consists of preparatory work and direct assembly of sections. In this regard, 5 main stages can be distinguished .

1. Site preparation - allocation of territory, designation of places where underground communications are laid, dismantling of buildings located on the site of the future fence.
2. Carrying out earthworks - marking the location of the future fence, digging a trench in the case of installing a fence structure on a foundation, or drilling holes for posts.
3. Installation of supports for the fence - pouring the foundation and installing the posts on which the frames will be attached.
4. Installation of spans - fastening fence sections to support posts.
5. Installation of gates and gates.

Metal fencing of the territory

Note! When installing metal fences on a foundation, it must be taken into account that installation will take several days, since the concrete must harden. Typically this period is 21 days.

If the installation is being done by a contractor, there will often be an estimate to repair the fence if any problems arise.

Stainless steel products

The stainless steel fence is highly resistant to atmospheric influences. Currently, the installation of this type of fencing is the most popular, although the price is higher than that of conventional metal, it guarantees not only the durability and reliability of the structure, but also an excellent appearance.

Beauty and reliability

Installation Features

• Do-it-yourself installation of fence sections can be done not only by welding parts, but also by using fastening bolts, in order not to damage the appearance of the product.
• There is no need to paint the structure after installation, since this material does not corrode.
• It can be mounted either on a concrete pad or without it.
• Installation of a sectional stainless steel fence can be carried out during the day.

Installation Tips

During the installation process, it is important to adhere to the basic provisions that will ensure the quality and correct installation of the fence.

To do this you need:

• The installation of the fence should begin from the gate or wicket.
• If there is no concrete pad, it is necessary to leave a gap between the bottom of the fence and the ground - a guarantee of protecting the structure from corrosion.
• After installing each section or opening, check that it is fastened correctly and that there are no vibrations due to gusts of wind.
• Upon completion of all work, carry out quality control.

When all stages of installation work on installing fences are carried out consistently and accurately, an excellent result is guaranteed.

Features of fencing construction

Constant updating of the building materials market allows for the production of increasingly better and more practical products. Fences and railings occupy a special place among the wide variety.

Convenient plastic fencing

Plastic fencing

One type of modern innovation is plastic fences. They are made from PVC boards and other components, so you can repair this type of fence yourself.

The advantages of plastic fences include:

• resistance to rodents and insects;
• does not require additional care;
• long service life, wear resistance;
• ease of installation and practicality in operation;
• Made from safe material and does not contain harmful substances.

The installation process of plastic fencing is very simple. It takes place in the form of collecting individual parts of the designer. This installation method allows you to adjust the distance between the supporting elements, and it is also possible to fit perfectly into the terrain of the site, repeating all its contours.

Tip: Also, such fences are much easier to repair if damaged. To do this, you do not need to replace the entire span, but only replace the damaged board.

Egoza fencing

Egoza barbed wire is a reliable way to protect the territory from uninvited guests. It is presented in the form of a spiral or flat barrier.

The advantages of such fences are:

• the strength of the metal wires is not subject to corrosion or damage;
• quick installation if you have the necessary knowledge;
• does not require additional maintenance;
• low cost, ease of transportation;
• high degree of efficiency;
• multifunctionality.

Note! Egoza fences are installed on top of another fence. When installing Egoza fencing, workers must have special thick clothing and leather gloves with wrist protection.

The tools you will need are a welding machine, a grinder, pliers for staples, a hammer, a level, a tape measure, a winch for tensioning the wire, and you will also need a ladder. The most important thing when performing installation is accuracy.

Tips for choosing and installing fencing

Before you start purchasing and installing fences, you should decide on the purpose of the fences:

• either beautiful;
• either safe;
• or practical.

After choosing the type, you need to correctly calculate the required number of sheets or mesh duration. Then you should prepare all the necessary tools. All actions and sequence must be performed calmly, carefully, with maximum precision, and then the fruit of your diligence will be magnificent.

Conclusion

Various fencing options can significantly expand the functionality of certain areas, as the video in this article confirms. Thanks to them, it becomes possible to make the territory, for example, protected from external interference or to give it the desired flavor.

Options for wire fastening brackets

Galvanized wire staple with a diameter of 2.5 mm (standard)

Bracket made of galvanized tape with a diameter of 1.5 mm (on request)

They are divided into the following types:

1. Straight - such a bracket is needed to fix a spiral, which must be installed in several rows, or a spiral fence is being installed. If there is not enough material, then it is possible to use it only for the upper part of the pillars, which are used as support.
2. L-shaped - this type is used when installing protective wire in 2-3 rows. The bracket has tension lines and must be placed on the inside or outside of the fence. A spiral tape is also attached to it.
3. Y-shaped, it is needed for installing a volumetric spiral or installing a sharp spiral in 2-3 rows.
4. Semicircular - this type is chosen if the tape is installed on a slope or directly on the ground. It is convenient to use for fastening a spiral barrier.

Diagram of a classic V-bracket

Reinforced razor tape Egoza crimped type

Egoza crimped barbed wire, or reinforced Egoza barbed tape, is the most effective type of barbed wire today. AKL Egoza is a steel core made of spring or rope wire, around which a stamped razor tape made of galvanized rolled steel is pressed using special rolling equipment. After crimping the AKL Egoza razor tape, it is an almost solid structure - the razor tape is attached to the core so firmly that it cannot be separated from the wire. Moreover, compression of the razor tape increases the effective diameter of the Egoza core and increases the already greater strength of the Egoza ACL base.

Positive qualities of wire

The manufacturer of Egoza in Russia is the famous one. It produces barbed wire of different diameters, which reliably protects various territories from unauthorized persons. This product has several positive qualities:

• Low cost.
• Cheap service.
• Easy installation.
• Numerous fencing options.
• High quality complies with GOST 285–69.
• Enclosing structures can have any height.
• Neutral attitude towards aggressive environments.

The technological process for creating prickly material is constantly changing.

The product becomes more durable, reliability and service life increases. The cost of hardware is influenced by the type of material from which it is made. Basically it fluctuates between 780-850 rubles.