Solders and fluxes. Examples of designations for brands of solders and fluxes. Application and properties.

Among the means for soldering, PRS 40 solder has a fairly wide application, both in industrial applications and in the field of home, everyday use. The availability, lightness and specific properties of this type of solder make it an indispensable tool for many types of work - from the installation of printed circuit boards, to work related to the connection of high-strength and alloyed grades of alloys and steels.

Considered one of the main available types of solder containing silver, it has also found its application in the process of applying a protective coating using tinning technology.

3.2. Properties of solders

Brazing

carried out by electric contact method, graphite or copper electrodes or using arc welding. Small parts are soldered using an autogen. With the electric contact method, solder is placed in advance between the parts to be joined or introduced into the joint during the soldering process; welding is carried out without metal additives by fusing the ends of the parts being connected.

For electrical contact soldering with silver solders

Borax is usually used as a flux. Soldering with self-fluxing solders, which contain phosphorus, and welding in a protective atmosphere are carried out without the use of flux.

Solders containing phosphorus cannot be used for soldering steel and cast iron and joints subject to shock and vibration due to the brittleness of the soldered seam. The classification and chemical composition of soft and semi-hard solders are given in table. 3.1.

Table 3.1
Classification and chemical composition of soft and semi-hard solders

Solder Chemical composition, %
View Brand Tin Antimony Cadmium Copper Lead Silver Indium
Tin O2 99,9
Antimony-free POS61 60–62 Rest
POS40 39–41
POS10 9–10
POS61M 60–62 1,5–2,0
POSK50-18 49–51 17–19
Low antimony POSSu61-0.5 60–62 0,2–0,5 Rest
POSSu40-0.5 39–41
POSSu30-0.5 29–31
POSSu18-0.5 17–18
Antimony POSSu95-5 94–96 4–5 Rest
Silver PSrO10-90 Rest 10±0,5
PSrOSu8 (VPr-6) 8±0,5
PSrMO5 (VPr-9) 2±0,5 5±0,5
PSrOS3.5-95 3,5±0,4
PSrOS3-58 57,8±1,0 3±0,4
PSr3 3±0,3
PSr3Kd 95–97 3,0–4,0
PSrO3-97 Rest 3±0,3
PSr2.5 5,0–6,0 91–93 2,2–2,7
PSr2.5S 2,5±0,2
PSr2 30±1 2±0,2
PSrOS2-58 58,8±1,0 2±0,3
PSr1.5 15±1 1,5±0,3
PSr1 35±1 1±0,2
Indium POSI30 42 28 3
PSR3I 3 97

The physical and mechanical properties of soft and semi-hard solders are given in Table. 3.2.

Table 3.2
Physical and mechanical properties of soft and semi-hard solders

Solder grade melting point, °C approximate soldering temperature, °C density, kg/m³ specific electrical resistance, μm m limit of mechanical tensile strength, MPa
solidus liquidus
O2 232 232 280 7310 25
POS61 183 190 240 8500 0,139 43
POS40 183 238 290 9300 0,159 38
POS10 268 299 350 10800 0,200 32
POS61M 268 192 240 8500 0,143 45
POSK50-18 142 145 185 8800 0,133 40
POSSu61-0.5 183 189 240 8500 0,140 45
POSSu50-0.5 183 216 8900 0,149
POSSu40-0.5 183 235 285 9300 0,169 40
POSSu35-0.5 183 245 9500 0,172
POSSu30-0.5 183 265 306 9700 0,179 36
POSSu25-0.5 183 266 10000 0,182
POSSu18-0.5 183 277 325 10200 0,198 36
POSSu95-5 234 240 290 7300 0,145 40
POSSu40-2 185 229 9200 0,172
POSSu33-2 185 243 9400 0,179
POSSu30-2 185 250 9600 0,182
POSSu25-2 185 260 9800 0,183
POSSu18-2 188 270 10100 0,206
POSSu15-2 184 275 10300 0,208
POSSu10-2 268 285 10700 0,208
POSSu8-3 240 290 10500 0,207
POSSu5-1 275 308 11200 0,200
POSSu4-6 244 270 10700 0,208
PSrO10-90 280 7600 12,9
PSrOSu8 (VPr-6) 250 7400 19,7
PSrMO5 (VPr-9) 240 7400 16,3
PSrOS3.5-95 224 7400 12,3
PSrOS3-58 190 8600 14,5
PSr3 315 11400 20,4
PSr3Kd 300 325 360 8700 8,0 54
PSr2.5 295 305 355 11000 21,4
PSr2.5S 306 11300 20,7
PSr2 238 9500 16,7
PSrOS2-58 183 8500 14,1
PSr1.5 280 10400 19,1
PSr1 235 9400 26,0
POSI30 117 200 250 8420
PSR3I 141 141 190 7360

Marking

Like other soldering materials, this solder has a unique marking that allows you to judge its type and components. Its name is deciphered as follows:

  • PSR is a solder that contains silver. It is this element that is the main one in the composition and generally determines the properties of the alloy.
  • 45 – this number indicates the quantity of the main element, that is, silver, contained in the solder. This brand includes 45 percent of the valuable element.

Preferred areas of application for soft and semi-hard solders:

O2

— tinning and soldering of collectors, armature sections and windings of electrical machines with class H insulation, tinning of critical fixed contacts, including those containing zinc;

POS90

— tinning and soldering of internal seams of food utensils and medical equipment;

POS61

- tinning and soldering of electrical and radio equipment, printed circuit boards, precision instruments with highly sealed seams where overheating is not allowed;

POS40

— tinning and soldering of electrical equipment, galvanized iron parts with sealed seams;

POS10

— tinning and soldering of contact surfaces of electrical devices, instruments, relays;

POSK50-18

— soldering of parts made of copper and its alloys that are sensitive to overheating, including soldering of copper-clad aluminum. Soldering of ceramics, glass and plastics metallized with tin, silver, nickel;

POS61M

— soldering of food utensils, medical equipment, electrical and radio equipment, printed circuit boards, parts sensitive to overheating;

POSSu61-0.5

— tinning and soldering of electrical equipment, soldering of printed circuit boards, windings of electrical machines, galvanized radio components under strict temperature requirements;

POSSu50-0.5

— tinning and soldering of aircraft radiators;

POSSu40-0.5

— tinning and soldering of sheet metal, windings of electrical machines, for soldering mounting elements of winding and cable products;

POSSu35-0.5

— tinning and soldering of lead cable sheaths;

POSSu30-0.5

– tinning and soldering of zinc sheets, carbon and stainless steels. Tinning and soldering of wires, cables, bands, radiators, various parts of equipment and devices operating at temperatures up to 160 ° C;

POSSu25-0.5

— tinning and soldering of radiators;

POSSu18-0.5

— tinning and soldering of heat exchanger tubes, electric lamps;

POSSu95-5

;
PSr3Kd
- hot tinning and soldering of collectors, armature sections, bandages and current-carrying connections of heat-resistant electric machines with high rotation speeds. Soldering of pipelines and various parts of electrical equipment.

POSSu40-2

— general-purpose solder;

POSSu30-2

— tinning and soldering in refrigeration equipment manufacturing, electric lamp production;

POSSu18-2, POSSu15-2, POSSu10-2

— soldering in the automotive industry;

POSSu8-3

— tinning and soldering in electric lamp production;

POSSu5-1

— tinning and soldering of parts operating at elevated temperatures;

POSSu4-6

— soldering of tinplate, tinning and soldering of parts with rolled and riveted seams made of brass and copper;

POSSu4


4
— tinning and soldering in the automotive industry;

POSK2-18

— tinning and soldering of metallized ceramic parts;

POSI30

;
PSr3I
- soldering of copper and its alloys and other metals, non-metallic materials and glass with metal coatings. Soldering of electronic equipment parts. It has high fluidity and provides good adhesion of soldered surfaces.

The parameters of soft solders with low melting points are given in table. 3.3.

Table 3.3
Soft solders (alloys) with low melting points

alloy chemical composition, % melting point, °C
tin lead cadmium bismuth silver indium solidus liquidus
Wooda 12–13 24,5–25,6 12–13 49–51 66 70
Rose 24,5–25,5 24,5–25,6 49–51 90 92
D'Arce 9,6 45,1 45,3 79
Lipovica with indium 11,8 22,2 8,5 42 15,5 48

Note. They are used in radio circuits with semiconductor devices and in circuits where solder is used as a temperature fuse.

The chemical composition and physical and mechanical properties of solid silver and copper-phosphorus solders are given in Table. 3.4.

Table 3.4
Chemical composition and physical and mechanical properties of solid silver and copper-phosphorus solders

Solder grade chemical composition, % density, kg/m3 crystallization temperature, °C tensile strength, MPa
silver Copper zinc phosphorus Start end
PSr72 72±0,5 28±0,5 9900 779 779
PSr50 50±0,5 50±0,5 9300 850 779
PSr45 45±0,5 30±0,5 25+1

–1,5

9100 725 660 300
PSr25 25±0,3 40±1 35±2,5 8700 775 745 280
PSr71 71±0,5 28±0,7 1 ±0,2 9800 795 750
PSr25f 25±0,5 70±1 5±0,5 8500 710 650
PSr15 15±0,5 80,2±1 4,8+0,2/–0,3 8300 810 635
PMF7 (MFZ) Rest 7–8,5 860 710

The parameters of copper-zinc and copper-nickel hard solders are given in table. 3.5.

Table 3.5
Copper-zinc and copper-nickel hard solders

Solder grade chemical composition, % physical properties
Copper nickel iron silicon Bor zinc tin crystallization temperature, °С density, kg/m3 tensile strength, MPa
solidus liquidus
L63 62–65 Rest 900 905 8500 310
LOK59-0.1-0.3 60,5–

63,5

0,2–0,4 Rest 0,7–1,1 890 905 8200
PZHL500 Rest 27–30 41,5 1,5–2 0,2 1080 1120 8630 600

The parameters of silver solders with a low melting point are given in table. 3.6.

Table 3.6
Silver solders with lower melting points

Solder grade chemical composition, % density, kg/m3 crystallization temperature, °С
silver Copper zinc cadmium tin nickel Start end
PSr50Kd 50±0,5 16±1 16±2 18±1 9300 650 635
PSr40 40±1 16,7+0,7/–0,4 17+0,8/–0,4 26+0,5/ –1 0,3±0,2 8400 605 595
PSr62 62±0,5 28±1 10±1,5 9700 700 660

The preferred areas of application of hard solders are given in table. 3.7.

Table 3.7
Preferred applications of brazing alloys

Solder grade application area
PSr72; PSr50 Soldering of metal-ceramic contacts and various critical current-carrying connections subject to bending and impact loads
PSr45 Soldering of copper and its alloys, stainless and structural steels. Soldering of short-circuited rotor windings and damper windings of highly loaded electrical machines. Solder provides high density and strength of soldered seams
PSr25 Soldering of copper and its alloys, stainless and structural steels, replaces PSr45 solder when making less critical connections
PSr71 Soldering parts is similar to PSr72 solder, but where greater fluidity is required
PSr25f; PSr15; PMF7 Soldering of copper and its alloys, including various current-carrying parts of machines and devices that do not experience shock and bending loads
L63; LOK59-0.1-0.3 Soldering copper and cast iron. Soldered joints have high strength and perform well under shock and bending loads
PZHL500 Soldering of connections operating at temperatures up to 600 °C

The parameters of copper-phosphorus solders are given in table. 3.8.

Table 3.8
Copper-phosphorus solders

Solder grade chemical composition, % melting point, °C
Copper phosphorus
PFM-1 90,0–91,5 8,5–10 725–850
PFM-2 92,5 7,5 710–715
PFM-3 91,5–93,0 7,0–8,5 725–860
PMF7 (MF3) Rest 7,0–8,5 710–860

Note. For copper-phosphorus and silver solders, borax is used as a flux in powder form or mixed with table salt.

The parameters of solders for soldering aluminum are given in table. 3.9, 3.10.

Table 3.9
Chemical composition and physical properties of solders for aluminum soldering

Solder grade chemical composition, % melting temperature,

°С

limit of mechanical tensile strength, MPa
aluminum Copper tin zinc cadmium silicon
Cadmium 36 40 24 85
AVIA-1 55 25 20 20
AVIA-2 15 40 25 20 250
VPT-4 55 40 5 410
34-A 66 28 6 545 180
35-A 72 2,1 7 540 140
A 2,0–1,5 40 58,5 425 80
IN 12 8 80 410 185
TsO-12 12 88 500–550
TsA-15 15 85 550–600

Table 3.10
Other solders for aluminum soldering

Solder grade chemical composition, % temperature of complete melting,

°С

soldering temperature, °C density, kg/m3
tin o1 zinc cadmium aluminum a7 Copper M0
P250A 79–81 19–21 0,15 250 300 7300
P300A 50–61 39–41 0,045 310 360 7730
P300B 80 8 0,5 410 700–750

The primary areas of application of solders for soldering aluminum P250A, P300A and P300B are given in table. 3.11.

Table 3.11
Preferred areas of application of solders for aluminum soldering

Solder grade application area
P250A Tinning of the ends of aluminum wires, as well as dip soldering of aluminum wires with aluminum and copper tips
P300A The same, soldering of connections with increased corrosion resistance
P300B Fill soldering of aluminum wires with aluminum and copper parts

3.3. Classification of fluxes and their designation system

Soldering fluxes

- substances and compounds used to prevent the formation of an oxide film on the surface of the solder and soldered material, as well as to remove oxidation products from the soldering zone. The melting point of fluxes is lower than the melting point of solder. Fluxes are used in solid, paste and powder form, as well as in the form of aqueous, alcohol or glycerin solutions.

Fluxes

used for soldering are classified according to: temperature range of activity;
nature of the solvent; the nature of the activator of the determining action; mechanism of action; state of aggregation. Depending on the temperature range of activity,
soldering fluxes are divided into: low-temperature (≤ 450 ° C); high temperature (> 450 °C).

By the nature of the solvent

soldering fluxes are divided into: water-based; non-aquatic

By the nature of activators


Low-temperature soldering fluxes
that determine their action are divided into: rosin; acidic; halide; hydrazine; fluoroborate; aniline; stearic.

By the nature of the activators of the determining action, high-temperature soldering fluxes

divided into: halide; fluoroborate; boride-carbon dioxide.

If the flux contains several activators, all activators must be named. For example, rosin-halide, fluoroborate-halide flux.

By mechanism of action

soldering fluxes are divided into: protective;
chemical action; electrochemical action; reactive. According to their state of aggregation,
soldering fluxes are divided into: solid; liquid; pasty.

physical characteristics

Property Meaning
Melting point, degrees Celsius 720
Density, kilogram per cubic centimeter 9100
Specific resistance, Ohm 100
Specific heat capacity, Joule per kilogram per degree Celsius 20
Rating
( 2 ratings, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]