Gazebo made from profiled pipe (41 photos): dimensions and diagrams of metal structures made from profiled pipe

Some people like metal gazebos, others don’t. They are mainly disliked by those who prefer wood. But anyone who has dealt with caring for a tree that is outdoors all year round knows how much time, effort and money it takes to maintain its normal appearance. From this point of view, metal is better: carefully processed and painted, it does not rust for years, it does not warp, it does not dry out or swell, does not rot, is not affected by fungi and does not become moldy. The worst thing that can happen to it is that it will rust. But there are proven cures for this “disease”: sandpaper, rust converter and paint. That’s why metal gazebos are often assembled with their own hands. They are also good because they can withstand significant loads and can be combined with any finishing materials for both walls and roofs.

Preliminary work

Before starting construction, we determine the location of the future gazebo, then select a suitable drawing, and also stock up on tools and building materials.
To complete the work you will need:

• profile pipes of square (for supports) and rectangular (for sheathing and fencing) sections;
• roofing polycarbonate or other finishing materials;
• concrete and cement or ready-made supports for a columnar foundation;
• accessories;
• paint or primer with anti-corrosion properties.

When choosing a suitable location, generally accepted rules are followed. It should be a secluded, quiet place, preferably with beautiful views. The area must be clearly visible so that the gazebo itself serves as a decoration. If you use it as a kitchen, you should not locate the building far from the house.

Measurements and design

The dimensions of the building are determined taking into account the area of ​​the allocated plot, and then the project is selected. Since pipes can be bent if necessary, there are many suitable options, simple and complex. The scheme provides:

• exact dimensions;
• consumption of building materials;
• foundation type;
• roof shape.

If necessary, you can opt for a collapsible structure. It takes 2–3 hours to assemble; when frost sets in, the structure is assembled and hidden in the house. The floor and foundation are made of cheap materials, fastenings are carried out with bolts.

A stationary building will require a more reliable foundation, and its construction will take more time. Inside, you can build a stove or barbecue out of bricks, install electricity, and create a cozy place for home gatherings. In this case, it is better to make the gazebo hexagonal or octagonal; the chimney is organized through the central part of the pitched roof.

You can build a collapsible gazebo and fold it during frosts

Gazebo pavilion for a summer residence

This, of course, is not the easiest project, but a gazebo pavilion for a summer house is an ideal place for a summer dining room. You can always change the size and design of the pavilion to suit your needs and budget, but it is better to use the instructions and tips provided on the diagrams. A gable roof will improve the appearance of the structure, but it will require large investments and a lot of materials. If you want to build a simple pavilion for an enjoyable meal with family and friends, there are several options you can choose from. On the one hand, you can build a gazebo or a simpler structure, like this wooden pavilion. It is possible to do it yourself, but you must plan every step of construction from the very beginning. It is recommended to buy the best materials you can afford. They should be weather-resistant, such as pressure-treated wood, pine or cedar. Carefully take accurate measurements before adjusting sizes. Pre-drill holes in the pieces before inserting screws to prevent the wood from splitting. All stages of construction are shown in step-by-step diagrams, detailed instructions are on the website.

Types and technological features of metal gazebos

Garden houses can be built from various materials - brick, stone, wood, metal. Each of these materials has its own advantages and disadvantages.

Let's take a closer look at the technological features of metal gazebos. The main advantages of metal structures over products made from other materials:

• high strength (the strong frame of the metal gazebo can withstand mechanical loads and does not deform when the soil subsides);
• durability (metal structures can last several decades);
• fire safety;
• combination with other materials: corrugated sheets, slate, polycarbonate can be used as a roof for a metal frame.

The combination of iron and polycarbonate - metal gazebos, photo

Unlike wood, metal does not burn; it will last much longer, does not fade in the sun and does not crack. It will not be damaged by insects and will not collapse under the influence of weather factors. The only drawback of metal is its higher price compared to wood (by about 15%), as well as certain difficulties in assembly (welding).

Advice: you can extend the service life of a metal product with regular maintenance - timely identification and elimination of traces of corrosion.

Types of metal structures

Garden buildings made of metal can be divided into two groups:

• stationary - capital buildings built on a permanent basis on a strip or columnar foundation;
• temporary - collapsible structures installed directly on the ground so that, if necessary, they can be easily removed or moved to another location.

Photos of metal gazebos - stationary and portable

If you decide to build a metal gazebo for your dacha with your own hands, you need to start by choosing a project and determining the method of manufacturing the structure.

When choosing a technology for constructing a metal structure with your own hands, be guided by your own construction skills, as well as the availability of tools and special equipment.

The simplest option is a gazebo made from a profile. It can be constructed from angles, round or profile (rectangular) pipes, channels (metal beams). This structure can be assembled using bolts or welding.

Advice: if you are unable to weld a gazebo from a profile and have no experience working with a welding machine, choose a prefabricated bolted connection.

Welded and bolted connection of elements - photo of gazebos made of metal profiles

Gazebos made from corrugated pipe are mobile, resistant to environmental influences, and reliable. This material is used as a load-bearing element to form the structure frame, since it can withstand heavy loads and cannot be deformed.

Photo of a gazebo made from a profile pipe using forged elements

Profile pipes are often used for the construction of garden houses. And, if the iron pipes are quite heavy, then you can use an aluminum profile pipe, which is lightweight and cheaper.

dabaeed38f88ce851238fadfbb82997c.jpe

Gazebo on a metal aluminum frame

If structures made from corrugated pipe look simple, then forged gazebos are more elegant. Ornate patterns, curls, openwork inserts made by artistic forging will give the building originality and a beautiful appearance. But to create a forged structure, you must have blacksmithing skills and special equipment. An alternative would be to purchase a ready-made forged gazebo, which you can assemble yourself.

Please note: since forged steel structures are labor-intensive to construct, they are quite expensive.

Forging products - metal summerhouses, photo

Do-it-yourself metal gazebos are always prestigious. An iron structure can have different configurations. The most common are rectangular and square structures, a little less often – octagonal and hexagonal garden buildings.

Complex design projects can only be brought to life by experienced craftsmen - original iron gazebos, photo

Taking into account the design solution and functional purpose of a garden metal gazebo, it can be equipped with various attributes for relaxation - furniture, a barbecue table, a barbecue. Some metal summerhouses have special brackets on which you can install seats around the perimeter. This significantly increases the comfort of the building.

A summer building with a barbecue is a cozy place to relax in nature

Key Build Options

In most cases, metal products are connected to each other using a welding machine. The speed of operation in this case is high, as is the degree of reliability. However, if we are talking about an open summer structure, it may be necessary to dismantle and subsequent re-installation. And it’s not surprising, because if a summer cottage is not guarded, then leaving a bunch of metal on it is at least unsafe. The point is that this hardware can simply be stolen. If so, then the modules must be welded and then connected to each other using bolts. For the most part, such collapsible structures are a metal frame on which an awning is installed or, alternatively, any other material that can be quickly fixed and just as quickly removed.

Types of gazebos

Gazebo, altanka, pergola and pavilion - just the names alone of this seemingly unprepossessing structure can recall a good dozen and a half, and each one hides its own small technical feature. Therefore, it is easier to classify “cultural canopies” according to the type of dominant structural material than to later remember all the differences between a belvedere and a gatehouse.

So there are 3 fundamentally different groups of materials:

• Stone. This is brick, shell rock, rubble and even monolithic concrete.
• Tree. In this group: board, log, beam and even willow twig.
• Metal. And finally, we include gazebos made of corrugated pipe, sheet steel or forged parts among metal canopies.

At the same time, structures made of brick and wood are quite massive and require a foundation for their installation, and this, in turn, not only affects the price of the issue, but also imposes some restrictions on the site. It’s easier to bury concrete in the ground than to remove it later and grow a lawn in its place.

At the same time, gazebos made from ordinary metal pipes can not only be built with your own hands, but also do not require any “preferential” conditions for installation. In some cases, it is possible to place awnings even on a garden path, and even, if necessary, hide them in the garage for the winter. Of course, not all models can boast such mobility, but there are plenty to choose from.

And for those who do not believe in the design potential of steel and, despite everything, believe that it cannot compete with natural materials, we invite you to look at the following selection of examples.

Agree, you can feel that these canopies have a soul.

Stationary option

This type of building is being installed permanently. For the frame and lintels, steel profiles, brick and wood are used. A prerequisite for construction is the presence of a foundation. The design of this type is complex, and its creation will require more material and time costs than a collapsible gazebo.

• The presence of a foundation and profile pipe products give the structure high strength and durability. It can withstand high loads from winds, rainwater and snow.
• During construction, it is possible to use different types of execution. The building can accommodate furniture, barbecue, and stove. Electricity can be supplied to it. This design can be glazed and heated.
• An additional advantage of the structure is the possibility of implementing various types of design.

Profile specifics

Specifics of the profile and advantages of gazebos made from it

A structure made using a profile looks quite original. This kind of construction can be done in the shortest possible time. The main condition is to have experience working with welding equipment.

The source material from which the frame of the gazebo is made is pipes, in most cases with a rectangular or square cross-section, made of carbon and low-alloy steel.

The raw materials are characterized by sufficient strength, multifaceted resistance to harmful influences and practicality.

Profile pipe for gazebo

Profile pipes, taken as the basis for the gazebo, give the building a number of positive characteristics. The main ones are:

• low specific weight of the structure (prevents the preparation of a powerful foundation);
• long period of operation;
• reasonable cost of material;
• fire resistance;
• no need for periodic repairs.

Decoration of the side parts of the structure

To decorate the walls of the structure, geometric or bizarrely shaped figures made of metal rods are suitable. You can also use wooden sheathing in combination with fresh flowers or grape vines climbing from the base to the roof. If you paint the wooden and metal elements of the gazebo in a timely manner, it will serve you for many years.

Wood is usually coated with an antiseptic and varnish, which can be applied both before and after the installation process. As for metal elements, in this case it is worth considering that surface treatment is carried out after completion of all work, since painted components are quite difficult to weld with each other.

A beautifully designed gazebo
In conclusion, I would like to note that the success of any construction lies in strict adherence to the instructions, the correctness of the drawing and the accuracy of the measurements taken. A gazebo made using profile pipes will not only delight the owner and his guests with its magnificent appearance for a long time, but will also become a place where you can relax, forgetting about the bustle of the city.

Gazebo made of rolled metal photo instructions

Now let’s look at the photos and drawings that will allow us to create a durable and beautiful gazebo from a profile pipe ourselves, and we will also conduct an audit of the necessary tools. Still, steel is not birch. You can't get by with your grandfather's axe.

a2fae5669666b3c1625d129b5b08e248.jpe 7ef815168a8f62745653738933613586.jpe 96d6f241b077febfd93eadcee46f83aa.jpe

d55750f8e084abe73b4a989b70ed6310.jpe

Therefore, before going to the metal depot, make sure that your workshop has:

1. Welding machine
2. Angle grinder
3. Electric drill
4. Screwdriver
5. Saw or jigsaw
6. Pencil
7. Level
8. Square
9. Protractor
10. Roulette
11. Brush or spray

If something is missing, it must be purchased, borrowed or rented.

Now find a suitable concreted area (or pre-make one) and get to work. And in order not to waste extra letters, and also to make the presentation of the material more concise, we will divide the process of making a gazebo into stages and provide each of them with a visual illustration.

1. We draw a regular octagon with a radius of 1800 mm right on the ground and make a steel contour around its perimeter from a profile pipe with a cross-section of 60×40 mm, from the corners of which we raise eight racks with a height of the same 1800 mm, but from a 60×30 mm profile. Control the accuracy of the work performed with a level or plumb line.
2. To give the racks rigidity, tie them at the end with a belt made of 40x20 mm pipe. To work, you will need to cut 8 fragments, each 1345 mm long.
3. The next stage is the floor joists. To construct them, you will again need rolled steel with a cross section of 60×40 mm and our diagram. Work strictly according to the pattern, because this intricate layout is not only the basis of the boardwalk, but also the support for the benches.

And now, actually, a little about the benches themselves. Their installation should begin with jumpers, which must be placed at a height of 400 mm. Then add central supports to them. And finally, focusing on them, screw the side “geobrakes” to the racks. Details on the diagram.

• Stepping back 225 mm above the plane of the bench, weld four rows of 20x20 mm square pipe between the posts, keeping a 50 mm pitch between them. This is a multifunctional element. On one side there is a plane for fastening the back boards, on the other there is a stiffening strap. Same as slanted ones.
• It's time to tackle the roof. For its rafters, take a profile of 40x30 mm and a length of 2071 mm. If you are not sure that you have enough experience to connect all the elements exactly at one point, start installation with one pair of strips, gradually adjusting other frame parts to it.
• The gazebo will not look good without overhangs, and therefore you should take care of the metal fillies. A twenty-centimeter visor will be enough.
• And two more octagonal rings from the thirtieth profile and the twentieth square and with welding work we will assume that you have figured it out.
• Now comes the most time-consuming process. It is necessary to sand down all welds and possible rust, and open the structure first with a primer and then with anti-corrosion paint. And remember, primer paint is not the best solution here.
• Work with wood should also be carried out from the bottom up. First, build a flooring from a fortieth board, having first passed the lumber through a surface planer and opened it with paint and varnish. This way the tree will last much longer.
• Then cover the supports for the benches and their backs, not forgetting to leave small gaps between the boards.
• And finally, roofing work completes the construction of the gazebo. If desired, it is possible to cover the rafter skeleton with ordinary corrugated sheets or sheet metal without fuss. But soft tiles will look much more interesting there. But for its installation you need to prepare a base from OSB boards or plywood.
• And only then lay the modified bitumen. And this is what your pavilion will look like if you followed our instructions exactly.

Do you already have a place to welcome guests? If not, roll up your sleeves and get to work.

What is important to know before starting work

As a starting material, you can use profile pipes, which can have a square or rectangular cross-section. This material is superior in performance to other types of rolled products, such as angles, rods and round pipes. The special cross-sectional shape provides profile pipes with the ability to withstand high loads. The design of these products is durable and weighs little. The gazebo will be beautiful and attractive.

It is convenient to adjust the mounting points from any side, but this cannot be said about round pipes. Profile pipes are universal. They can be used as load-bearing elements, such as roof beams. The racks should be made of pipes of such a diameter that the structure is strong and reliable. The remaining elements can be made from smaller products, which will depend on their functional purpose.

Assembly diagrams

Typically, metal elements are attached to each other using a welding device. Such work provides significant strength to the welded gazebo and is carried out quite quickly. However, it should be borne in mind that this option is practically not used for an open summer gazebo. In this case, it is better to connect the elements to each other using bolts. If necessary, you can repeat the installation or dismantling work, which will not work if the structure is welded.

Most often, a collapsible structure is a metal frame that is covered with some kind of material. Many people use an awning for this.

If the structure is collapsible, then it is better to split the frame along its edges. For a quadrangular gazebo, separate contours are created, there should be four of them. Using jumpers, you need to connect them to adjacent elements. Octagonal and hexagonal structures are made in a similar way.

Construction of a gazebo from a profile pipe step by step

The first step towards erecting a metal structure is choosing its type. It can be open, semi-closed or completely closed, with or without lighting. For this purpose, a construction project is drawn up.

Design

The sketch can be sketched by hand, or you can entrust its development to a professional designer. At this stage, you should decide on the dimensions of the structure. The height of the structure should be slightly higher than the average height of a person (180-200 cm), the width of the entrance opening should be no less than the width of the front door (about 1 m).

a drawing indicating the actual dimensions of the building is needed in order to calculate the number of pipes for installing the frame, as well as other necessary building materials.

Detailed drawing of a metal gazebo

To install an iron structure you will need:

• profile pipes with a cross section of 50x50mm and a wall thickness of 2-4 mm for the frame;
• iron rods or pipes with a cross section of 20x40 mm for the transverse elements of the sheathing;
• roofing;
• electrodes, welding;
• grinder, metal drills;
• screwdriver, self-tapping screws.

Preparatory work

Next, they begin to prepare the place for installing a metal gazebo. This could be a site near a pond, in the shade of trees, or near a house - the main thing is that it is picturesque and comfortable for relaxation. In the selected area, remove the top layer of soil (15-20 cm) and level the base. Since the metal gazebo is light in weight, a columnar foundation will be sufficient for it.

Preparing the site for the gazebo

Next, they begin to install the columnar foundation - the base of the gazebo. To do this, holes 50-70 cm deep are dug in the corners of the site, into which a layer of crushed stone (20 cm) is poured and support profile pipes are poured with concrete.

Preparing the site for the gazebo

Attention: the evenness of the installation of the pillars must be checked with a level.

Formation of a metal frame

After installing the vertical metal posts, begin attaching the horizontal crossbars. To do this, you can use iron rods or pipes of a smaller cross-section. Metal elements can be connected to each other by welding, or using bolts and screws. Transverse pipes for fencing the structure are installed at a height of 1-1.2 m. And the top of the support pillars is fastened with the help of an upper strapping.

Please note: the piping pipes should be welded to each vertical post - this will ensure the reliability of the structure.

Methods of fastening metal gazebo elements, photo drawings

Next, they begin to install the frame under the roof. To prevent precipitation from remaining on it, the transverse logs are attached at an angle (30-45 degrees). For a gable roof, several support triangles are made, which are connected by a common profile at the top point, and their bases are connected to the main frame of the gazebo.

Construction of the frame of a metal gazebo for a summer residence, photo

Advice: before installing the roofing, you should prime and paint the metal frame, since this will be problematic after covering.

Roof

One of the simplest and most economical roofing options for a gazebo is polycarbonate. For the roof of the gazebo, 8 mm thick cellular polycarbonate is suitable. It is secured with special bolts with thermal washers. To do this, polycarbonate sheets are cut to the required sizes, and holes for fastenings are drilled in the pipes. The ends of polycarbonate sheets can be covered with special strips - this will provide them with additional protection and give them a neater appearance. As a result, we get a rather cozy and inexpensive gazebo, which only needs to be equipped with benches or other furniture for proper relaxation.

e530c3cdb2eaf85b26c3e7b1dc276bd8.jpe c96b7090affac7b65a7be44bf4449b26.jpe

Attention: when laying the roof covering, install it with a slight overhang. This will protect all structural elements from atmospheric influences. . Do-it-yourself ready-made gazebo made of metal profiles

Do-it-yourself ready-made gazebo made of metal profiles

Metal gazebos at the dacha are a sign of the good taste of the owners of the site. They will become a harmonious addition to landscape design, a reliable and cozy place to relax in nature. These structures can come in different shapes and sizes. Metal combines well with other building materials, which allows you to realize even the most daring design ideas.

Site selection and site equipment

We begin to determine the best location in the local area. If there is a reservoir, it makes sense to place the gazebo on the upper edge of the bank. The building should be located in a clearly visible area, since it is a decoration of the entire landscape design.

Having finished choosing a location, we begin preparing the site. To do this, in accordance with the drawn up plan, you will need to remove the turf from the soil along its perimeter and apply marking lines. Next, we dig holes according to the number of support pillars, 50–60 cm deep.

A profile with a length that takes into account the gap of the pipe in the prepared pit is very often used as racks. The optimal cross-sectional values ​​for the future support element vary from 80×80 mm with a wall thickness of 2.5–3 mm. To give greater stability, it would be useful to weld the heels to the supports.

Drawings with dimensions

Before assembly, detailed sketches of the structures should be made: a diagram (drawings, dimensions, detailing) will help to correctly calculate the amount of material. As a sample, you can use gazebos that are available for sale at construction companies. Most often, these are variants of non-traditional shapes: arches and semi-arches, pentagons, trapezoids, etc. The design of a simple 4-6-corner garden building of the classical type can also be taken as a basis.

When drawing up a drawing, it is important to determine the height inside the structure so that a person can stand upright. Benches in non-standard gazebos are often located near short walls or arch slopes

There must be at least 1 m above the seats to metal structures to prevent injuries.

Large do-it-yourself wooden gazebo

This large gazebo can be called more of a pavilion. Not a bad option if you have a large yard or enough space on your property. It’s not a bad project in the sense that in the future, under such a canopy you can install a grill or barbecue, or even organize a stationary summer kitchen. To build such a gazebo you need a columnar foundation, but perhaps the most difficult part is the roof. To do this, the upper contour of the gazebo needs to be installed with horizontal ties. Then secure them with self-tapping screws to the supports.

For reliability, the screeds must be secured with metal strips. Then secure all other parts. Finally, saw off the central support flush and lay the sheathing.

Please note that the sheathing is made in different ways, depending on the roofing material; if it is slate, it can be either single-layer or two-layer. But that's a separate topic

The entire process of building a gazebo is shown in step-by-step photos; if you have any questions, instructions are on the source website, the link is under the gallery.

Photo source wjday.ru/kak-postroit-besedku-svoimi-rukami-na-dache.html

Unusual awnings

Today, serious demands are placed on the design of a canopy for a house. Of course, the hinged structure must be reliable and well protect the closed area from natural loads. But a beautiful canopy always looks better than an ordinary nondescript structure. Therefore, let’s look at several unusual options that designers, architects and manufacturers offer today.

For example, the bottom photo shows a glass canopy that is attached to the wall using brackets and braces. The original transparent design, which, unfortunately, does not protect from sunlight. But if the task is to form protection only from precipitation, then this is an original option. True, such a canopy quickly becomes covered with dust and dirt, so you will have to clean it with enviable frequency.

Glass canopy over the walkway along the houseSource remeslo.by

Transparent polycarbonate, which has appeared on the market and is available in a huge variety of colors, has today become very popular in terms of covering various structures, including canopies. It can be used in both wooden and metal structures. The photo below shows just such a canopy, assembled from metal profiles and covered with polycarbonate.

Canopy covered with polycarbonateSource iron-plus.kz

Today, sliding canopies are very popular, which, if necessary, can be assembled, revealing a path laid along the house. Typically, such structures are used for those paths on which, if necessary, it is necessary to quickly organize a recreation area. That is, they installed chairs with a table or a sofa area, opened the canopy and got an excellent platform on which to relax.

Today, manufacturers offer several types of sliding canopies. The simplest is made of lightweight aluminum rods covered with a fabric or plastic coating. The rods move apart like a spyglass. It should be noted that there are many designs for the mechanism for opening canopies.

There are more complex designs that use metal profiles, glass or thick plastic. These are more complex models, and therefore more expensive.

Let us add that there are two types of sliding canopies on the market in terms of their design. That is, these are either canopies or stationary structures on support posts. The photo below shows a canopy canopy.

Canopy in the form of a sliding canopySource warema-group.com

Preparation for construction

Before starting construction, you need to transfer the dimensions of the gazebo to the site chosen for the construction of the structure. If you need an option with a foundation, dig a pit of the desired shape and type:

• for columnar (pile) excavations are drilled for piles: in the corners of the structure and throughout the entire floor area in increments of 50-70 cm;
• for a perimeter strip building: depth - at least 70 cm, width - 30-40 cm;
• for slab soil, select soil covering the entire floor of the gazebo and 15-20 cm beyond its perimeter.

Concrete is poured into the pit to the soil level and the main supports (corner and along the length of the walls) are strengthened in it. After this, formwork is placed to raise the base above the ground by 15-50 cm. After hardening, the surface is leveled, measuring with a long building level the height differences between adjacent columns or along the upper plane of other types.

While the foundation is gaining strength, you need to prepare the necessary tools:

• grinder;
• drill (for bolting);
• welding machine (if the parts are welded);
• building level, square, tape measure.

Design features

When planning a gazebo from a profile, you must definitely decide on its design, which can be of two types:

• collapsible (that is, created using fasteners);
• capital (welded).

The first type is a frame assembled from profile pipes with a canopy roof made of plastic or water-repellent fabrics. The advantages of this option include simplicity and high speed of installation, which does not require any special skills or specialized tools. The process of erecting a gazebo rarely takes more than 2-3 hours, and when cold weather sets in, it is removed just as quickly. Other features of such structures include the lack of a foundation and the need to fasten the main components with bolts and pins.

Non-removable options are built on a foundation. And their main advantages are durability and the ability to withstand heavy loads. In this case, the frame is made of metal profiles, and other elements are made of brick, plastic or wood. A stationary gazebo can be open, semi-closed or closed - and the latter type makes it possible to place furniture and even household appliances inside. Electricity is supplied to such gazebos, thanks to which they practically play the role of summer kitchens.

Drafting

The process of developing a project and further constructing a covered structure intended for recreation using profile pipe products is similar to creating a gazebo from any other types of rolled metal.

Before drawing a drawing of a gazebo made from a profile pipe, the homeowner should decide on the type of structure.

Currently, the most popular designs are the following forms:

• rectangular;
• square;
• hexagonal.

If there is no experience in carrying out such work, then, according to professionals, it is better to opt for the first two options - in this case it will be easier to calculate the parameters of the gazebo and carry out the installation yourself.

Next, you need to create drawings of a gazebo from a profile pipe with your own hands, on which you need to indicate the dimensions of the structure and the dimensions of all its even the smallest elements with a mandatory explanation of how they should be connected to each other.

When designing a building with welded components, one should not forget about tolerances. This is required so that the parameters of the erected gazebo do not differ from those provided for in the design documentation.

When designing a structure, when detailing is required, in addition to the drawings, several sketches are drawn up, containing a general view and images of particularly complex areas from different angles. However, you should not forget about some important points. For example, the length of corrugated pipes when buried in the ground must exceed the designed height of the supports by the amount of deepening of the base of the structure, regardless of whether concreting is planned or not.

The advantage of choosing a square or rectangular gazebo is that the arrangement of roofs for such a structure cannot be called particularly difficult.

DIY outdoor gazebo

Here we show you how to build an outdoor gazebo with your own hands from wood. The design, as you can see, is solid. The main building material will be wooden beams, the volume and quantity will depend on the size of the structure, the author does not provide numbers, so you will have to select it yourself. The second necessary material is metal rods of two types: T-shaped and L-shaped. You will also need screws, very large screws, twice the thickness of the beams. Don't forget about a ladder, preferably a strong one, it is the main tool in this project. Concrete is another essential material for building your gazebo and will be used as the base and anchor for the entire structure.

After you make the drawing, you will be able to see what dimensions are needed for all the wooden parts. If you have the tools, you can cut all the components yourself. This is the cheapest option. If you don't have the skills or tools, you need to find someone who will do it...

The first step is to build the foundation.

• Prepare the area and pour the required size slab. If you want more strength, add metal reinforcement to the concrete.
• Next, install the wood beams and metal supports into the concrete at a 90-degree angle.
• If there are gaps between the metal and wood portions of the supports, use tar and silicone to fill them and create a watertight seal.
• Repeat this step for all supports. Typically four posts are installed, but if you choose a different design, more posts may be required.
• Next step, install the wooden slats onto the supports, remember to measure all sides and make sure they are equal. Then secure them in place with screws.
• The next step is to attach the side rails to the ones you installed on the posts.
• Then you need to make a triangular structure that will support the roof. The triangular shape of this part of the design is designed to distribute weight down towards the supports, which will be especially useful if you live in an area with high levels of precipitation, especially snow.
• Use metal rods to securely hold the diagonal pieces in place. Run a metal rod through the two pieces of wood to make sure they are held firmly in place.
• Now install the top crossbar where the roof will be attached. This may require the use of rope or additional help to hold the pieces together.
• Now it's time to install the roof supports to help support the weight. Place supports approximately every 55 cm. Secure the supports with screws.
• Cover the roof with sheets of plywood, this layer must withstand a lot of weight, it must be secured very securely.
• After this, attach the waterproof layer. There are different types of roofs, you can choose which one you prefer, but laminated tiles are a popular and effective choice.

Photo source www.instructables.com/id/Build-a-gazebo-from-sketchup-to-reality

Construction stages

Let's figure out how to build a gazebo yourself. The instructions for carrying out the work consist of several stages:

Illustration Description

Digging holes for supports. The corrugated pipe is concreted in the ground at a depth of at least 60 cm. Use a special drill, with its help the work is quick and easy. First, holes are dug around the entire perimeter, a stand is placed in each, there is no need to level them, this is done later.

The upper and lower trim are welded. Remember the following: The top crossbar is placed on top, the outer joints are welded first. Then one or more middle racks are cooked; The lower trim consists of several pieces and is welded between the posts.

After welding the frame elements, the pillars are concreted. A columnar foundation is made simply: roofing material is placed in the hole for waterproofing, a tube is made along the diameter of the hole; The solution is poured inside. It is prepared at the rate of 1 part cement to 3 parts sand and 3 parts crushed stone. Water is added until the optimal consistency is obtained.

The frame parts are welded together. This can be done both before and after concreting the supports.

The main thing is to ensure the strength of the structure and smooth joining of the elements.

Pay special attention to corner joints. Control the position with a square, first grab the joint in several places

Only after the geometry has been checked from all sides, weld a continuous seam.

The roof ridge support is being welded. The height is determined by the angle of inclination of the slope; make it at least 30 degrees. Weld the three elements on the ground, and then weld the finished assembly to the top trim, this is the easiest way to maintain the ideal geometry.

The roof frame is assembled like this: The slope elements are welded to the ridge support along the edges. They protrude beyond the edge of the frame to better protect the gazebo space from precipitation; Cross members are welded between the elements of the slopes; their number depends on the size of the roof.

The roof is covered with corrugated sheeting. Sheets of the required size are ordered so as not to cut them on site. Fastening is done with roofing screws; they have a drill tip and are screwed into the metal without pre-drilling.

The walls of the gazebo, or rather the partitions about a meter high, are also made of corrugated sheets. It is attached directly to the frame with self-tapping screws. Sheets are ordered by size so as not to cut them on site.

After covering the partitions, the gazebo can be used. Portable or stationary furniture is placed inside. If desired, a floor is made using concrete screed or wood.

Photos of metal gazebos

In general, the options for gazebos made of metal structures are very numerous: welding, forging, different materials with which the frames are finished. Profile pipe, round, made of steel and aluminum, there are even stainless steel options. All this is complemented by any shape: from square and rectangle, to any complex shape. Metal is so flexible that there are many, many variations. Some of them are collected in the photo gallery.

The roof has an unusual shape and the awning, with decorative elements visible, is stretched from the inside

Metal frame covered with an awning instead of a roof: there is shade, it’s not hot and it’s inexpensive

An unusual openwork made of thin pipes, painted white, adds lightness to the design

Very nice decor. This is not a metal gazebo, but a song in metal

Another option for a multifaceted gazebo

Artistic forging in the design of racks - elegant and exclusive

Round gazebo for a summer house under blue polycarbonate - romantic

A simple solution for a summer house: a square gazebo covered with beige polycarbonate

The rafter system can be beautiful

Unusual structure - a very interesting solution

It’s not often you see a metal gazebo made of round pipes. The welder is a master of his craft

An openwork gazebo made of metal is a summer option for a summer house or in the yard near the house

Drawing of a hexagonal gazebo - top view

Drawing of a hexagonal gazebo - front part

Hexagonal outdoor gazebo made of iron

Sketch of a metal gazebo with polycarbonate finishing. The lower part has a shaped finish made of pipes, which are covered with dark translucent polycarbonate.

Photo of a hexagonal gazebo made of metal profiles with partial wood trim

Metal gazebo with barbecue

Drawing of an octagonal metal gazebo with dimensions

Sketch of an octagonal metal gazebo with dimensions

Octagonal gazebo made of metal

Round gazebo with metal frame and polycarbonate cladding

Metal frame combined with tinted polycarbonate cladding

This is probably the simplest gazebo: two bent pipes that are attached to the backs of garden benches. Polycarbonate is attached to the pipes. Summer garden gazebo is ready

0751f2a9c760c9e5c7006b741371c608.jpe

65857ffe9c95f068902dce63ded64806.jpe

d92155ab77a2168a3a07b76e80f5d50b.jpe

How to weld a gazebo for a summer house, watch the video.

DIY garden gazebo

This project is, of course, larger-scale. To build a garden gazebo with your own hands, you don’t have to be a high-level carpenter or a jack of all trades, although it wouldn’t hurt. All stages of construction are shown here.

• Work begins with markings. To ensure proper drainage and prevent grass and weed growth, remove the turf and about 4 inches of soil.
• Then fill the prepared area with gravel.
• Then install the spot foundation forms and fill them halfway with concrete.
• Use a level to make sure the tops of each shape are at the same height.
• In this case, the relief is slightly inclined, so the height of the molds for each hole is different.
• In the second photo you see a device, a laser level, which was used for marking.

I won’t describe all the details further, everything is shown quite well in the photographs, and detailed instructions can be read on the website, link under the gallery.

Photo source www.scout.com/home/build/story/1386859-build-a-hip-roof-gazebo

Construction of a gazebo

The first step in building a gazebo from a profile with your own hands is the construction of a foundation - usually a pile or columnar one. To do this, they first dig holes for the support posts, install the structures themselves, fill the recesses with stones or crushed bricks and fill them with cement-sand mortar.

The next stage is the construction of a metal frame, which is attached to the supports and placed in such a way as not to interfere with the passage into the gazebo - that is, above the level of human height in the area of ​​the door. This point should be taken into account at the stage of drawing up the drawing.

When creating the cladding of a structure, polymer materials are most often used. And the roof is installed on a metal profile sheathing. The simplest design for making a gazebo yourself is the classic gable roof, which can be easily installed on any frame.

The work is completed by arranging the gazebo. After this, the stylish and durable design will become an excellent decoration for your garden or country landscape. And it will provide an additional place where you can relax, chat and even cook food, if the design provides for combination with a barbecue area or installation of a stove directly inside the gazebo.

Metal harness

Metal framing involves the production of a metal frame that rests on supports and subsequently serves as the basis for the entire structure. It must be equipped and placed at the optimal height so that in the future a person, when entering and exiting, does not have to do unnecessary actions to overcome this element of the gazebo.