How to Solder with a Soldering Station with a Hair Dryer. Training in Soldering with a Hair Dryer

Soldering stations are mainly used in professional environments, although anyone can purchase them. This is quite powerful equipment that is suitable for many different operations, including the restoration of complex equipment. The station can include not only a standard soldering iron, but also a hot air dryer.

In addition, any station has a so-called control module and galvanic isolation from the network. The presence of galvanic isolation minimizes possible negative consequences from soldering (black smoke or electric shock).

The soldering station is also distinguished from ordinary soldering irons by its temperature stability during operation, which is critical when soldering printed circuit boards.

Contact and non-contact

Now soldering stations are presented in a significant variety.
They can be divided into groups according to several parameters. For example, they are contact and non-contact. A contact station is an ordinary soldering iron that has direct contact with the surface when soldering, equipped with an electronic control and temperature control unit. That is, this is the most standard variety, which is suitable even for beginners.

Contact stations, in turn, can be divided into two subtypes depending on the solder used. Some models use only lead-containing solders, while others also use lead-free solders.

In the latest modifications, the heating element has a power of up to 160 watts. In this case, increased power is absolutely necessary, because the melting temperature of lead-free solders is quite high.

As for contactless stations, they can be used, among other things, for operations with microcircuits. A non-contact soldering unit can be hot-air, infrared or combined, and each of these three types has its own principle of operation.

MX-5241 – powerful induction device

This is the best soldering station for home at a low price with induction heating. Its digital control unit has a wide range of capabilities:

• The password turns on the station.
• Allows you to create up to 10 temperature profiles.
• Allows you to set the time for automatic shutdown or sleep mode.

Those who, in order to save money, buy a Chinese equivalent, quickly realize the cost of their mistake. The soldering iron tip must be changed almost immediately.

Although the device has large dimensions, it has a very fast heating rate and low heat capacity of the heating device. There is no air gap between the heater and the tip, which is often noted in reviews as a huge advantage of the unit.

It should be noted right away that this is the best soldering station for professionals. In the hands of an amateur, it will simply turn into an expensive toy. On all resources this machine is called nothing less than “Repair Station”.

It is ideal in everything except the rather high cost. It has a well-functioning built-in power indicator, ergonomic soldering irons and control using the SmartHeat processor. It recovers very quickly and has excellent ESD protection.

Infrared devices and hair dryers

Hot air stations (sometimes simply called hair dryers) work like this.
First, a strong air flow generated by the compressor, passing through the heating coil, acquires the desired temperature, and then a stream of hot air is directed to the soldering area. The hot air station makes it possible to solder in hard-to-reach areas with simultaneous heating of several surfaces at once. Any hot air installation has a power that is sufficient for soldering with any type of solder, both with and without lead.

Hot air soldering has wide application, for example, in the field of repairing household electrical appliances and mobile phones. However, it is almost impossible to install and dismantle microcircuits (even in BGA format) with thermal air installations - this is a serious limitation.

Infrared-type stations must have a heating element in the form of an infrared emitter made of ceramic or quartz. And thanks to this, infrared installations have some advantages over their thermal air counterparts:

• soldering of complex-profile components is possible;
• there is no need to look for a nozzle for a hot air gun for a specific microcircuit;
• During soldering, no radio components are blown away by heated air flows from the printed circuit board;
• The soldering area heats up very evenly.

Infrared stations are not cheap and are considered equipment for true professionals. Beginners in soldering and radio electronics for the most part do not use such devices.

A few words should be said about combined soldering stations. They are called that because they combine several types of equipment in their design, for example, a soldering iron and a hair dryer.

TECHNICAL SPECIFICATIONS YIHUA 968DB+

This lot represents the YIHUA-968DB+ soldering station, which is equipped with a special air flow indicator in the diaphragm pump. A Samsung system computer and a proportional-integral-derivative controller, or in other words a PID controller, allow you to monitor and adjust the temperature of the equipment. It is also impossible not to mention the unique function of absorbing harmful fumes, which will ensure safer and better performance. All absorbed smoke from the soldering station is filtered, which eliminates its potential for harmful effects on the human body. Equipment is used to work with a wide variety of electronic and plastic components, as well as for compression using high temperatures or simply heating. If necessary, professional equipment can be used for hot drying or removing varnish layers, as well as glue or paint.

Articles and video reviews:

Review of soldering stations or how to choose a soldering station

Analog and digital

It is also possible to classify soldering stations depending on the temperature stabilization mechanism and the operating principle of the control units. Based on these parameters, the following types of modern soldering stations are distinguished:

• analog;
• digital.

For analog models, the heating element is turned on until the soldering iron warms up to a certain temperature, then the power stops. When the temperature drops to a preset level, the heating element turns on again and continues heating.

The advantages of analogue stations include their affordable cost. A disadvantage of such models is considered to be low accuracy of operation, which sometimes leads to overheating of the soldering tip and radio components.

A digital soldering station is characterized by the fact that the heater is controlled and controlled using a PID controller. And this regulator, in turn, is controlled by a program embedded in the microcontroller. In general, the digital temperature stabilization method is much more accurate than the analog method.

Manufacturing recommendations

Without modification, a hair dryer device for drying hair will not bring success in operation, so it is recommended to use only a motor with a fan and a spiral that will be wound taking into account the requirements for a homemade device. Strong heating, together with a decrease in fan rotation and a decrease in the diameter of the nozzle, leads to burnout of the spiral and melting of the plastic case, and also, if the insulation is poor, a short circuit can occur.

By installing an additional power button for the fan, you can speed up the cooling process of the soldering iron. If you turn off the heating element and leave the cooler on, the heated part of the device will be blown through with air, thereby cooling the entire system. For convenience in working with the device, it is recommended to make a stand with a metal base, as well as using magnets. Thanks to the use of a neodymium magnet, the hot air gun will be securely held in the desired position.

Assembly and dismantling

It is also possible to divide all soldering stations into assembly and desoldering stations.

Assembly stations are any stations that perform soldering of parts. However, not all of them can unsolder any element from the overall structure.

For such purposes, special dismantling stations have been created. Their design includes a compressor that works to suck out solder. That is, the heated solder is removed from the working surface into a special container.

There are also assembly and disassembly installations for soldering that perform both functions at once. They are equipped with both mounting and dismantling soldering irons (by the way, they have different capacities).

Repair

In addition, in specialized literature and on the Internet there are references to repair soldering stations. They are used to carry out repairs of all kinds of electronic devices or in those industries where it is necessary to independently or simultaneously perform various operations related to soldering.

In other words, a multifunctional repair soldering station is a single installation that combines several tools for different purposes.

Plus, there are 2 in 1 and 3 in 1 soldering stations. 2 in 1 models combine the functions of a hair dryer and a soldering iron. A 3 in 1 soldering station also contains a power supply.

And one more addition. Almost all soldering machines run on electricity. But some are interested in whether there are gas soldering stations. In fact, there is some confusion in terms here.

To perform significant volumes of work on construction sites or in public utilities, powerful devices with stationary gas cylinders are sometimes used to solder thick copper pipes. Of course, they can be called soldering stations, but in fact they are just large and powerful gas burners.

Replacing parts

Some substitutions of active and not so active components:

• Op-amp - Lm358, Lm2904, Ha17358.
• Field-effect transistors - Irfz44, Irfz46, Irfz48, Irf3205, Irf3713 and the like, suitable for voltage and current.
• Bipolar transistor T1 - C9014, C5551, BC546 and the like.
• Optocoupler MOC3021 - MOC3023, MOC3052 without zero crossing (without zero cross according to the datasheet).
• Optocoupler PC817 - PC818, PC123
• Zener diode ZD1 - any for stabilization voltage from 4.3 - 5.1V.
• I used an encoder with a button from a car radio.
• The capacitor in the triac snubber is required for 400v and 100n!
• LCD WH1602 - carefully look at the location of the contacts when connecting to the main board; it may differ from different manufacturers.
• For power supply, the best option would be a stabilized 24V 2-4A power supply from one large eastern store or a converted ATX power supply. Although I used 24V 1.2A from the printer, it gets a little warm when using a soldering iron, but it’s enough for me. At worst, a transformer with a diode bridge, but I don’t recommend it.

What to look for when selecting and purchasing

The quality of soldering is directly and strictly dependent on the parameters of the soldering equipment and its design features, and all this is extremely important to take into account when purchasing.

Power

First of all, you need to pay attention to the number of functions and modes in which the station operates, as well as the rated power consumed and produced.

To repair printed circuit boards and install elements that are sensitive to static electricity, soldering irons with a power of 24 to 40 watts are used.

To work with power buses and conductors, soldering irons from 40 to 80 watts are needed. Soldering tools of 100 Watts and more are usually used for large-sized structures made of non-ferrous metal, which, in principle, have significant thermal conductivity.

Equipment

The equipment also plays an equally important role here; in particular, you should pay attention to the number of tips in the factory kit. The stings may differ from each other in shape and edge area.

These characteristics are noticeably reflected in the final soldering. The larger the area of ​​the end of the tip, the better the heat transfer.

The presence or absence of an indication of the tip temperature on the screen is also an important parameter. All other things being equal, it is better to choose a model in which such an indication is present.

Even the weight and dimensions of the soldering station are of great importance. After all, sometimes during repairs you have to hold the tool in your hands for several hours.

Also, when choosing a soldering device for yourself, it is worth asking whether it is possible to replace spare parts if they break down and how easy it is to find and buy these spare parts.

Flux selection

It should be added that in the future, for work, the owner of the soldering machine will have to constantly purchase consumables, such as flux. And here, too, it is important to make a wise choice.

The functional purpose of the flux is to prevent oxidation of the surfaces being soldered.

There are a lot of brands of flux in stores, but they are almost always based on the same ingredients. This can be pine or spruce rosin, an alcohol solution of rosin, or a special soldering acid (it is considered the most powerful and active).

Operation of various types of soldering equipment

Due to the variety of types of soldering equipment, choosing a soldering device that best suits the tasks at hand can be difficult. When planning to purchase this or that model, we advise you to first study their technical capabilities and the scope of application recommended by the manufacturer.

Home craftsmen who have to perform small operations with a soldering iron often find themselves in a situation where the sensitive elements of the device overheat, but they cannot do anything about it due to the inability to correctly adjust the temperature of the working tip .

Those who encounter this quite often should definitely consider purchasing a soldering station with a hair dryer instead of a regular soldering iron.

Such stations are supplied with a power supply, which allows you to customize the voltage and temperature of the device at your discretion.

However, you should not expect that after purchasing a soldering station with a thermal stabilization system you will be able to provide yourself with comfortable working conditions. Before choosing a specific model, it is necessary to compare all offered stations according to such characteristics as power. Craftsmen who plan to use refractory solders especially need to worry about this.

If this point is not paid attention to, the following negative consequences may occur during operation of such a station:

• due to exceeding the permissible soldering temperature, the circuit components will begin to overheat;
• due to severe overheating, the service life of the soldering iron tip will be significantly reduced;
• the durability of the heating element will be sharply reduced;
• constant overheating of tracks on the board;
• poor soldering quality.

If such situations occur quite often, then you should think about replacing the equipment you are using with special devices for lead-free soldering. Not only do they have a higher power rating , but they can also be used for lead soldering.