How to drill a hole in a sink or sink? Practical advice

How to make a hole for a faucet in a stainless steel sink?

From the author: I am glad to welcome you again, my dear readers! When we renovate a kitchen or bathroom, we are certainly faced with the installation of a sink. For some people, the hole for the faucet in a stainless steel sink becomes a real mystery that is quite difficult to solve. I have repeatedly encountered cases where a person decided on untested methods, thereby simply rendering an expensive product unusable.

One of my friends, who not only did not have special education and skills, but also did not even know how to hold a drill in his hands, decided to make such a hole using a hammer and chisel. Naturally, it turned out to be very crooked, and besides, it was larger than it was necessary. While trying to correct his mistake, he deformed the shell so much that it could not be restored.

Be careful, now I will tell you two ways that will help you solve this problem.

Conclusion

We looked at two options for sinks without faucet mountings - stainless steel and ceramic. You have figured out how to correctly make a hole in an iron kitchen sink yourself, and where valves for designer products are now installed.

By choosing beautiful, functional and unusual sinks, you can transform the interior of your apartment or home. The video in this article will allow you to find additional information on the above topic.

Many consumers are surprised - why are sinks sold without holes for faucets? For fans of the “Skillful Hands” circle? Actually, no (more precisely, not only for them). Now I’ll tell you more.

What are the benefits of a stainless steel sink?

I get asked very often why a stainless steel sink is so good. Naturally, installing this item in the bathroom is not aesthetically pleasing, not practical, and generally not entirely normal. To decorate this part of the apartment, it is best to use specimens made of artificial stone.

Installation of the product discussed is more appropriate as part of a kitchen renovation project. An alternative could be a product made from quartz, but not everyone can afford it.

Let us highlight the advantages of steel samples:

• price. The most important thing when performing repair work is rational savings. Yes, if the budget doesn’t bite you and you can afford a more aesthetic product, do it,
• mobility. More than once, even I have encountered moments when a new sink was installed, and the old one was sent to another place for service. For example, to the country house. The issue of removal and re-installation in this case is more convenient,
• reliability. Not every housewife can boast of being careful when working in the kitchen. She can drop something heavy at any moment, and if it is a cast-iron cauldron and it falls on marble, then a crack in the latter is guaranteed. On the steel sink, only a small dent will remain, which can be easily removed with a regular hammer and a wooden block, and the scratch can be covered with special means so that it will not be visible at all.
• it does not need to be embedded into the countertop. This way you can optimize its use and not pay extra when ordering the kitchen itself.

From the above, it becomes clear that a stainless steel sink is the optimal, and most importantly, budget option for the average resident of our country.

Let's use a drill

You can make the necessary hole using a power tool, which every self-respecting owner should have at home. An ordinary electric drill must be equipped with a specialized attachment, which is designed for working on metal. This point is very important, since using a drill with a pobedite tip or diamond coating will simply render it unusable, and there will be no result.

The nozzle is something similar to a compass. If you ask the appropriate question at a construction hypermarket, they will kindly provide you with the necessary product. Let's describe the process step by step.

1. First of all, decide on the place where the mixer will be located. In order to understand whether pouring water will splash onto the walls of the kitchen, simulate the pressure using a filled plastic bottle.
2. Next, you need to create a small hole that will serve as the center point of the cut circle. To do this you will need a metal drill. Arm yourself with it and follow the procedure.
3. Change the nozzle and install it exactly in the place that we created in step No. 2. Before you start drilling, set the desired diameter.
4. Drill a hole.

Just four simple steps solve the problem with a bang!

There is also a special tool that allows you to do the same job, but using your physical strength. It is called "Fixa" and consists of two cylindrical bases connected by a bolt. One of them is sharpened in such a way as to create a standard hole for a faucet.

Tips and tricks for drilling tiles

Below are recommendations that will help novice craftsmen drill holes in tiles quickly and accurately:

• If the master has planned the locations of sockets, pipes and other communications, it is best to make holes in the tiles before laying them. After all, it is much more difficult to do this on the wall;
• You must remember to give the drill a rest. If smoke is noticed, stop work immediately. Otherwise, the drill and drill bit will overheat;
• It is recommended to buy only high-quality drills of average cost. Otherwise, a cheap tool may split the tile;
• Before drilling each hole, it is necessary to thoroughly wipe the drill from dust;
• If a craftsman often makes holes in tiles, he can buy a special template, which is sold in every hardware store. This will greatly facilitate the process and speed it up.

If a craftsman often makes holes in tiles, he can buy a special template, which is sold in every hardware store.

The main thing when drilling tiles is caution and accuracy. If you follow the proposed instructions and advice, any novice master can cope with this job.

How to drill a hole in a ceramic sink

When does the question arise? Sinks without a hole were installed in Soviet bathrooms where there was one faucet for the sink and bathtub. Recently, this option has been used less and less, but sometimes, during budget renovations, apartment owners want to save on buying a new sink.

Sink without tap hole.

And so, you have a sink that has no hole. Working with ceramic sinks may seem like a lot of work, but you can do it if you follow the tips below. It's simple.

You will need:

1. Drill or hammer drill. 2. Drill (feather) for ceramics. 3. Crown for ceramics with tungsten carbide coating

Step-by-step instruction

• To prevent the drill from moving, cover the area where you will drill with masking tape.
• We make markings - put a dot with a marker.
• Insert a ceramic drill bit into the drill and start drilling at low speed. Proceed with caution - ceramics are a very fragile material.
• Use a smaller diameter drill first - for example, 6 mm. Then replace it with 8 mm. It is important to constantly cool the drilling site - water it with cold water.
• After drilling the narrow central hole, switch to a bit with a diameter of 30 or 32 mm, depending on the diameter of the mixer.
• Every 2-3 mm, take a thin drill and make small holes in the circle that the crown made. This is done so that the teeth of the crown can engage the edges of the circle and continue working.
• When the hole is ready, you can install the sink in place.

Basic requirements for work

Even before starting work, you should familiarize yourself with some requirements, compliance with which will ensure a high-quality result. Do not forget that any mistakes can lead to damage to the projectile and its destruction, so in no case should you neglect the recommendations below ().

Availability of necessary power tools

Drilling holes by hand is unlikely to be possible, so make sure you have a drill or a powerful screwdriver on hand in advance. At the same time, the equipment must not only be powerful, but also affordable - it is unlikely that it will be possible to accurately drill ceramics using a heavy drill

Selecting the right equipment

Under no circumstances should you use drill bits for metal, concrete or wood on ceramics.

you need to purchase a crown with a special tungsten coating, which will allow you to work efficiently and quickly, the store will help you choose the appropriate option, the main thing is to know such indicators as the diameter of the elements and drilling depth

Be careful when measuring and marking

It is very important to correctly mark the location of future pits, since in case of errors they cannot be repaired. Also, do not forget about the convenience that must be ensured; sometimes the mixer is located on the side and is inconvenient to use. Precision in work

Precision in work

The drilling process itself must be carried out very carefully; below we will look at this part of the work in more detail, as it requires maximum attention

How to drill a hole in artificial stone

Typically, sinks made of artificial stone come with an existing hole for the faucet, but there are options without it, or you need to drill an additional hole for the faucet for the water filter. What to do in such cases?

You can seek professional help, but if you feel confident, you can try drilling the hole yourself. But to do this, it is necessary to determine the material of the product - this determines which tool to use.

Note! Why is the kitchen faucet noisy?

So, the options:

• Porcelain tiles
• Agglomerate
• Acrylic stone

Porcelain tiles

The strongest and most durable of the entire group is porcelain stoneware. It serves for a long time and is durable, tolerates temperature and chemical influences well, so it is in great demand. But it is also the most complex material; it is most difficult to make a hole in it than in other types of artificial stone.

The best option for carrying out the work is to choose a crown for porcelain stoneware. It can be supplied as a set with or without a centering drill.

• What is laid first, paving curbs or tiles?
• How to calculate the ventilation route

• Features of turbocharged diamond wheels

When working with porcelain stoneware, the drilling site should be constantly cooled, and the drill speed should be at the lowest possible speed.

You need to understand which side to drill from and when. If from the front side, after installation, the edges of the hole will be smooth and neat, but there is a danger that the drill will slip and spoil the appearance, for example, scratch or damage the edge.

If from the back, before installation, you are unlikely to damage the bowl, but perhaps the hole will have uneven edges. Basically it's not a big deal because they will be covered by the faucet.

Remember - the further the hole is from the edge of the product, the better. Don’t forget about the bowl so as not to get another, completely unnecessary hole - porcelain stoneware is both a durable and very fragile material. Therefore, the following rules must be observed:

• Before carrying out the process, fix the sink, put chipboard under the bottom, this will protect the work surface.
• Drill exactly perpendicularly, otherwise the drill may damage the glaze.
• To prevent the drill from moving, cover the area where you will drill with masking tape.
• Before work, wet the drill; while drilling, spray the work area with water, for example, from a plastic bottle.

Agglomerate

Milling cutter for working with artificial stone

Agglomerate is a softer material. Usually the sink already has a hole almost drilled. It must be knocked out with a core or drilled with the cutter included with the sink. If the kit does not include a cutter or core, then it is necessary to perform the work with a diamond-coated crown. The instructions are completely identical to the process of drilling porcelain tiles.

Acrylic

The third option is acrylic.
If your sink and countertop have color cohesion and create a cohesive space, then it's acrylic stone. This option is not difficult to work with. Ordinary drills are suitable for working with metal or wood. The diameter of the hole for the mixer is 32-35 mm. It can be drilled with a feather drill for working on wood products. The drill speed should be at medium or low speed. When working with acrylic stone, a lot of chips are formed, and a rather unpleasant odor appears from the plastic heated by the drill.

• 
  Automatic control gann

• How to care for a steel bathtub

• How to clean the inside of a bathroom faucet

Quartz agglomerate

Quartz stone is considered harder and more durable than acrylic stone. How to drill through artificial stone of increased strength? Diamond coated crown. And if wood drills are suitable for an acrylic sink, a more durable drill may be needed for a quartz sink. You need to be prepared for the fact that after drilling a quartz sink, the crown will be unsuitable for further use and will have to be thrown away.

You need to work in the same way as with acrylic agglomerate: slowly, carefully, at low speeds. It is advisable to prevent chipping, since quartz stone must be polished at home.

How to work with a stainless steel sink

Manufacturers often produce stainless steel sinks without the special opening required to install the faucet. As a rule, such sinks are made of durable steel. This sink is very difficult to drill with a regular drill. A diamond-coated crown is barely enough for one hole (after that it will only be scrapped).

We offer for your consideration several options for installing a hole for installing a faucet on a stainless steel sink, although these tips are universal and are suitable for sinks made of ordinary steel.

Option #1

To drill a hole in it, you need to use cobalt drills (or tungsten, but they are more expensive) and a cutter. A cutter, or punch, is a two-part tool. It consists of a die and a knife connected by a bolt.

Before starting work, the sink must be turned upside down. Next, we follow the following procedure:

1. Mark the installation location of the mixer with a pencil or bright marker. 2. Make a small dent in the center of the circle so that the drill does not slip off. 3. Make an initial hole using a 5-6 mm drill, and increase it to 10 mm with a drill of the appropriate diameter. 4. Install the punch (notch) so that the part with a smaller diameter is where the mixer should be. Tighten the bolt until the cutter cuts a hole.

Option No. 2

The second option involves drilling holes only for flexible connections and mounting stud(s). You can use the mixer pressure plate as a template. This option will save you from buying a cutter. But, in any case, you cannot do without cobalt drills.

Option #3

Here's a video as an example:

• How to install eccentrics for a bathroom faucet
• How to connect a hygienic shower to a regular mixer
• Which is better, bath or shower reviews?

We hope the article was useful. If you know of other ways to drill holes in a sink or sink, write in the comments.

What it is?

Drilling bits are attachments for a drill in the form of a cylinder. On the one hand, these drills have devices for fastening in a hammer drill or drill. On the other hand, there are teeth, on top of which spraying of various compositions is often applied. Such cutters are used for cutting ceramic, porcelain stoneware, tile or mosaic tiles.

This drill attachment allows you to get large-diameter holes and achieve high-quality results without chips and cracks.

Cutting with a crown on tiles is only possible in conjunction with a special drill or a special hammer drill. The first should have the option of low speed, and the second should have the function of turning off the “impact mechanism”. Thanks to this, drilling holes, for example, for a switch or socket, will be easier and more efficient. By the way, the most popular crown diameters are 40, 68, 100 and 110 mm. This is enough to carry out all the work in the bathroom.

How to cut a hole in different types of sinks

The lack of holes for taps or mixers in modern sinks is not a defect, but a necessity. Installation technologies for such products require several positions for the sink itself.

The product line offers several basic diameters for plumbing fixtures - try to guess which one is needed here! We won’t guess, we’ll install it.

Photo is a problem that we have to solve.

Two types of sinks

The most popular types of kitchen sinks now are:

• Stainless steel sinks;
• Porcelain stoneware products.

With both stainless steel and porcelain stoneware, manufacturers are in no hurry to drill holes, leaving these little details to the sellers.

The sinks are different, and so are the appliances.

For your information! You can arrange for holes to be drilled at sink sales stores. The price of the manipulation is negotiable, you indicate the diameter and location, pay and receive the finished product with places for installing taps and mixers.

The problem has been solved, and this topic can be closed, but there are situations that radically change the original plans. Moreover, the desire to do everything with your own hands, and the pleasure you get from a job well done is incomparable.

Independent work

Simple things can change the world. The initial desire to install the tap on the right side in the corner will be nullified if your wife is left-handed.

On a note! In the kitchen, more than anywhere else, great importance is given to beauty, functionality, and also ergonomics. It is very inconvenient for left-handed people to open the tap on the right with their left hand. Water gets on your hand.

You can press out a hole.

We recommend placing the sink in place first, taking a closer look, and then deciding and selecting nest locations. Have you decided to do the work yourself?

1. Carry out all work on the product before installing it in a permanent location; with these simple steps you will prevent deformation of the item and premature damage;
2. Place the sink horizontally on a wooden base. Drill a small hole with a metal drill, enough 5-6 mm to locate the center of the circle;

Advice! If you use punches and a hammer, then the above manipulation is not necessary.

Carrot drills and their capabilities.

1. And then there are three paths to choose from:

• Hammer and punch. Here you simply pierce the fixed bowl with special nozzles manually, the nozzle is initially selected to match the diameter of the hole in the sink for the mixer or tap;
• Punch of special design. This is a mechanical toy that uses the extrusion method. Such a punch consists of a threaded pin and two nozzles, a tap and a pressing washer with a wrench head. By installing the pin into the hole from the outside, screwing on the washer with the head, you use a wrench to tighten and press. The result of this manipulation is a hole in the stainless steel sink for the mixer;
• The third way is a special drill called a carrot. The name has taken root so much that even on the factory packaging of the product it is not called anything other than a carrot drill. The drill is presented as a cone, with a cutting edge diameter from 6 to 32 and even 38 mm. We will not describe the principle of using a drill, everything is clear.

Punchers included.

To the piggy bank! Sometimes the consumer's choice is on mixers with large diameter glasses. A sink siphon with a large hole requires a large seat. Then there are several options: the first is to order a hole in the store, the second is to drill several holes of a smaller diameter around the circumference. Then simply connect them together by removing the inner circle with a chisel. True, accuracy and precision of movements will be required.

How to drill a hole in a stainless steel sink - we've sorted it out, let's move on to the stones.

Stone and under stone

Much more interesting is the topic of drilling landing sockets in stone sinks.

• At the location of the proposed hole, we make a mark and drill;

Note! A simple manipulation - working with a drill - is not very simple in practice. A drill with a pobedit insert is contraindicated for this work; it doesn’t drill so much as it chips and peels the material. The drill for metal performed well, but low speeds of the drill itself are required (ideally, it is better to use a hand drill). At high speeds, the edges melt.

We work at low speeds.

• During the drilling process, the material can heat up quickly, but this is difficult to control. It is better to drill a hole in a sink made of artificial stone with a thin drill. We work around the perimeter of the entire future nest;
• It is recommended to “pass” the partitions between the holes in two ways:
• We cut the strokes with an electric soldering iron, followed by knocking out the plug with a hammer;
• The material is cut well with a jigsaw. Although this process takes longer, the edge is the smoothest;
• Grinding the hole circumference is done using a round abrasive attachment for the entire circumference. If you don’t have one on your farm, use a regular round file.

Crowns coated with diamond are rare guests on the farm.

To the piggy bank! You can also drill a hole in an artificial stone sink with a diamond drill, if you have one.

We inform you! Some bowls have special marks. These are places where, by striking accurately with a hammer, you can punch a hole. This must be done with caution; the tags themselves are marked with paper stickers, which may slip during transportation. A blow to another point can only lead to destruction of the material.

Quality work is the key to longevity.

Preparatory activities

Before cutting a hole, you need to do a lot of preparation. First, measurements are taken. The groove must have such a diameter that the mixer can easily pass during installation. There should also be no problems with fixing the tap. The measured diameter is applied at the drilling site. It is important to try everything on, because a mistake will cost a lot.

After marking the area where the groove is made, you need to prepare the workspace and tools. The place where the work will be done must be free and spacious. The sink must be stable and secure. Everything unnecessary needs to be removed.

The hole for the mixer in a stainless steel sink is drilled using a drill and various attachments. Tools needed to drill a hole in the sink for the faucet.

1. Drill.
2. Needle file, file, sandpaper.
3. A small file or cutter for metal.
4. Protective glasses.
5. Brush.
6. Water for cooling.

Drilling bits that can be used to make a hole:

1. an ordinary Pobedit metal drill (preferably with diamond coating);
2. herringbone cone drill;
3. bimetallic hole saw; crown type;
4. Victory hinged drill with a diameter of 28, 30, 32 or 35 mm (size depends on the parameters of the mixer).

How to install a faucet on a stainless steel sink

Bathroom renovation involves a huge amount of work related to the installation of plumbing equipment. The process of installing taps and mixers requires special attention.

If you don't know how to install a faucet on a stainless steel sink, you have two options. The first is to turn to specialists who will perform all the manipulations for you, but at the same time you will have to look for a good master and pay money for his services. The second option involves independent installation, for which you need to familiarize yourself in detail with the information in this article. Information about the features of plumbing equipment and its installation will be presented here.

To install a faucet on a stainless steel sink, you must first delve into the details that will allow you to understand all the intricacies of this process. Of course, it is practically impossible to list all manufacturers and their products. Still, it must be said that all modern sinks are divided into two large categories: mortise and overhead. The latter are relatively cheap, but the mortise ones have a more presentable appearance.

It should be noted that overhead sinks made of stainless steel produce quite a lot of noise from falling water. This problem can be eliminated by using a special sticker that is attached to the back of the product. It is made from foam insulation and dampens vibrations. This must be taken into account during the selection and purchasing process.

Before proceeding with the actual installation, it is necessary to prepare all the necessary tools and consumables that will be required when performing the work.

Tools and materials needed to install the faucet on a stainless steel sink:

• Electric jigsaw. It is necessary to make grooves in the tabletop.
• Drill. It is used to drill holes for installing a jigsaw blade.
• A set of fasteners for fixing the device on the sink.
• Masking tape. It is used to cover the countertop to avoid damage to the surface.
• Silicone sealant. This material is necessary to reliably seal the seam between the sink, countertop and the faucet itself.
• Additional protection of the ends of the groove can be obtained by treating with drying oil.
• To connect the mixer you will need an adjustable or gas wrench.
• A Phillips and flat-head screwdriver will help you install the harness.

Attention! When choosing fasteners, you need to pay special attention to the amount of steel in them. The thicker the steel base, the greater the chances of high-quality fixation of the elements. This indicator will ensure a long service life. Experts recommend avoiding the use of plastic fasteners.

Preparing the countertop

To carry out accurate markings and high-quality cutting of grooves, it is recommended to adhere to the following instructions:

• Initially, you need to attach the sink to the countertop and trace its outline with a pencil.

• After this, we remove the sink and draw another internal contour from the received one with an indentation of one and a half centimeters.

• It is recommended to cover all sides of the outline with masking tape. This will protect the surfaces from damage during installation.

• Next, holes are drilled inside the resulting contour, into which a jigsaw file will be inserted to cut out the grooves. During the cutting process, you must be extremely careful not to go beyond the created contours.

• At the end, it is necessary to clean the cuts from burrs and soak the ends with drying oil.

Mixer installation process and piping

These manipulations are performed after installing and securing the sink into the resulting slot in the countertop. The arrangement and fastening of parts requires special attention to avoid inaccuracies.

• At the first stage, you need to wind a special FUM tape onto the threads of the flexible water supply hoses. As an alternative, a sealing polymer thread can be used. This will ensure sealing. After this, you can connect the hoses to the body. Even if standard rubber seals are present, they will not be able to create the necessary reliability against leakage, since they will be squeezed out during the assembly process.

Important! It is not recommended to screw in supply hoses while holding them by the braid. Such manipulations can lead to a rupture of the braid at the junction with the sleeve. Screwing is carried out only using a key.

• In the hole under the mixer in the sink, you need to put the union nuts for the tap one by one.

• After this, the mixer body itself is pulled to the installed sink. To perform this procedure, you need a nut with studs or a wide plate. Before screwing the faucet, it is important not to forget to install a special ring gasket. This is what will ensure the seal. Despite the relatively small thickness of the stainless steel sink, the mixer can be installed really reliably. To do this, it is recommended to make special inserts from plywood according to the size of the tap hole and install them on the back side. You can avoid swelling of the material under the influence of water by pre-coating the plywood inserts with drying oil.

The installation of the harness has one subtlety - you should not use excessive force when tightening the screws and fasteners. Otherwise, you can tear out the middle of the sheathing.

Sealing and fastening

• Initially, we glue the sealing tape, with an indentation of 3-4 millimeters from the edge of the sink.

• Silicone sealant is applied along the entire perimeter of the product beyond the boundaries of the previously installed tape.

• After this, you can install the sink on the prepared place in the countertop. After this, it is necessary that the hook be made from the bottom of the tabletop. To secure, tighten the screws.

• Remove excess squeezed out sealant.

After completing all the above manipulations, it is enough to connect the flexible water supply hoses to the water supply pipes, and also install a siphon.

Standard system fasteners

Not everyone knows how to install a stainless steel sink on a cabinet or countertop using a standard mount. This option consists of plastic corners with special inclined slots.

For reliable installation, you must adhere to the following procedure:

1. When installing the sink, it is necessary that its edges be placed on special fasteners.
2. At the bottom of each mounting groove, holes are drilled with a thin 3 mm drill to ¾ of the wall thickness. To avoid through drilling, it is recommended to stick a piece of electrical tape on the drill, which will allow you to control the depth of entry.
3. The fasteners are secured with self-tapping screws. All installed corners should move with little force from the attachment point.
4. At the end, just set the fasteners and press the sink.

Because of this, we can conclude that installing a flush-mounted sink does not require excessive effort and complex calculations. However, this option cannot be called reliable. In the case where the corners are fixed to the side walls, the product may shift in the horizontal plane.

Alternative mounting option

To ensure maximum reliability of the installation, it is enough to take a rail whose cross-section corresponds to the curves of the edges of the sink where it will be installed. You also need to use overhead galvanized plates or 4 corners with pre-prepared holes for self-tapping screws, which will help with fixation.

Stages of work

1. Cut the strip according to the perimeter of the sink.
2. To avoid rotting of the material, it must be soaked in drying oil.
3. Next, the rail is placed behind the bends of the sink.
4. Tightening to the walls is carried out with overlays or corners.

The right lubricants

If the drilling process is carried out in an industrial environment on specialized metal-cutting equipment, then special compounds are used as a cutting fluid (coolant).

In this case, the use of self-made mixtures is not justified and can lead to damage to equipment and tools.

If the work is carried out in a home workshop, then the purchase of expensive consumables is not justified. They can be replaced with homemade coolant options.

You can prepare a lubricant based on ordinary machine oil, to which a certain amount of colloidal sulfur is added. Moreover, the sulfur must be ground into a fine powder.

Another option for preparing coolant at home is a composition based on sulfur and fatty acid. To prepare it, take bar soap and grind it on a grater. These pieces are then dissolved in hot water to form a thick soapy solution. Next, a technical solution of sulfuric acid is slowly poured into the container. As a result, fatty acids will rise to the top layer of the container. At the end, pour cold water into the container and wait until the fatty acids harden. Thickened acids are separated from the rest of the composition and mixed with sulfur in a ratio of 6 to 1.

Useful tips for installing a faucet on a stainless steel sink

In order for all work to be completed at a high level, you need to listen to the following advice from experts in this industry:

• An excellent option for the kitchen is a sink with two bowls, on which you can install one swivel faucet with a long spout.

• When carrying out installation, you need to take care of safety. To do this, it is enough to install an overflow system that will protect your home from flooding.

• For the kitchen, the ideal option is a single-lever mixer, which is very simple and easy to use.

• In cases where it is necessary to attach flexible supply hoses to a steel pipe with serious thread defects or rust, it is better to extend it using couplings and seals. This will increase the reliability and sealing of the system.

• It is recommended to install several separate valves on the kitchen supply line. Even in the event of a breakdown, you can continue to use water.

• Avoid bending the supply hoses or connecting them under tension. The lower the voltage, the longer they will last.

All of the above tips and recommendations will allow everyone to reliably install the faucet on a stainless steel sink. Our video will allow you to become more familiar with all the intricacies of installation.

How to cut a hole in different types of sinks

The lack of holes for taps or mixers in modern sinks is not a defect, but a necessity. Installation technologies for such products require several positions for the sink itself.

The product line offers several basic diameters for plumbing fixtures - try to guess which one is needed here! We won’t guess, we’ll install it.

Photo is a problem that we have to solve.

Types of faucets

To understand why you need to take into account the nature of both items of the set, let's get acquainted with the different types of faucets and find out in what environment they will reveal themselves best.

Single lever

The single-lever mixer is perhaps considered the most common modern model. As a rule, it is made of stainless steel, sometimes with PVD coating. Models of this type are usually installed on stainless steel sinks in a modern style. Any sink shape is suitable, but square, rectangular and trapezoidal corner models with a single bowl look better.

The big advantage of single-lever basin mixers is their ease of operation. If you need to fill a pan with water, you can easily adjust the pressure. You can close the water with a light touch. If your hands are floury or oily, just touching them with the back of your hand is enough so you don't get the mixer dirty. But if you have low-quality water flowing through your pipes, it is better to install a filter at the inlet, since single-lever models are very sensitive to small mechanical particles.

Two-valve

The most ancient system that is used in our time. Two-valve mixers are convenient because they make it possible to more accurately regulate the temperature of the water flow. They are often made in a retro style, so they go very well with antique sinks. In the past, models with a rubber seal prevailed, but now varieties of faucets with ceramic plates are more often produced. They are more reliable, but if they break down they must be replaced rather than repaired. Two taps and a high spout between them are often stylized as bronze, copper, brass, and sometimes they give the surface an original granite color.

Sensory

This variety is easily recognized at first glance and is found only in ultra-modern kitchens. Only the spout with a sensor built into it “grows” from the sink or countertop. You may not immediately understand how to turn on the water. But if you put your hand near the sensor’s activity zone, the water will turn on.

The water temperature is set in advance using a special lever on the side. During subsequent turns on, you will receive water at the desired temperature without touching the tap. A touch-sensitive kitchen sink faucet is a good solution: it has an auto-shut-off system, so you won't forget to turn off the water.

Thermostatic

The most modern type, which can create a water flow of a given temperature, even if the water flows through the pipes is too hot or cold. Typically, thermostatic faucets are used in the bathroom, but there is nothing stopping you from installing one of them in the kitchen. This will be especially useful if the boiler is responsible for the hot water supply. You are guaranteed not to scald yourself with boiling water.

An addition to the thermostatic mixer can be sinks made of artificial granite, ceramic, or metal. This solution is more suitable for a modern interior, but if you wish, you can find rare universal models that are appropriate in any environment.

Products – Tekhmashholding – group of companies, official website

Stainless steel is widely used in household and industrial applications to create various items due to its significant number of positive qualities. It is an alloy of various materials that give stainless steel resistance to corrosion and aggressive environments. Based on their percentage, it is possible to create different types of material in the alloy. At home, items made from so-called food-grade stainless steel are often used, such as taps and mixers, sinks and sinks in the kitchen, tableware and other things. Therefore, it is often necessary to drill through stainless steel for some purpose. However, you should prepare for the process. That is, study the recommendations of more experienced craftsmen if the procedure is being performed with your own hands for the first time, and also select suitable drills and lubricants. In addition to experience, you will need a bit of sensitivity and attentiveness. This is far from the only thing a master needs. What helps most when drilling is lubricating fluid, without which the master risks damaging the drills and the material. The lubricant consists of machine oil and sulfur, so it is easily recognized by its viscous form and increased fat content. In addition to choosing the right material, you need to know some features of how to drill a hole in stainless steel.

Sinks for installation on one level with a countertop:

Sink installed on the same level as the countertop:

• located flush with the countertop
• wipes off easily
• makes it easy to remove crumbs
• fits into the overall interior design
• can be made of stainless steel, ceramic or SILGRANIT™ material

Do you like the combination of design and practicality? Then flush mounting is the right way to install a sink for your kitchen.

Easy to clean, hygienic and tidy

You can wipe down the countertop and be absolutely sure that you have removed all the crumbs and food debris. Consequently, bacteria and microbes will not begin to develop under the sink edging. Therefore, there is no need to walk along the edge of the sink with a cotton swab. A thin black line will not appear over time around a sink installed at the same level as the countertop. There is simply nowhere for crumbs, drops and dust to accumulate. They can be easily swept from the countertop into the sink with one movement of the hand. Simply wipe the sink with a soft cloth. That's all. She will again delight with her purity, brilliance and beauty.

A combination of aesthetics and functionality

Modern minimalism. Flat surfaces are elegant and visually appear more expansive

. There are no joints that would disturb the harmony of integrity. There are no handles on the cabinet doors. Do you like this solution? Then give preference to a sink for installation on the same level as the countertop. Combine stylish design, aesthetic appeal and practicality in your kitchen interior.

• The sink and countertop merge into a single whole, making them look elegant and exclusive. Plus, you get more countertop space. Attach special cutting boards to the sink. That's all! You can cut vegetables or bread directly over the sink. Cuttings and crumbs will fall directly into the sink bowl.