How much does an electric welding seam cost?

The professional path of a home welder is quite simple: the purchase of the first welding machine, the first repair, the first attempts to do the job efficiently, and after a while the first customers. It is at the last stage that the welder needs an estimate. An estimate for welding allows you to thoroughly calculate your expenses and income. In addition, the customer will have more confidence in you, since you will be able to provide him with transparent calculations.

There are many ways to determine the price of welding work: from the “by eye” estimation method to painstaking calculations. In this article we will tell you in detail how to evaluate your welding work so as not to lose money. We will also tell you about the factors influencing the price, valuation methods, and teach you how to perform simple calculations.

general characteristics

Welding is a procedure that is performed using a special apparatus in order to obtain an unbreakable connection. Welding is a fairly popular service. Without it, industrial production, construction, and the work of a service or repair organization are impossible. It is also used when improving your own home. Electric welding is used for gas and water pipes and metal structures.

The process takes place in a number of stages:

  1. Preparation of the workplace.
  2. Installing a grounding clamp to the workpiece being welded.
  3. Selecting the type of electrode.
  4. Performing welding.

Calculation formula

Where twork is the time you spent working;

td is the time you spent traveling to your workplace (an optional item in the calculations);

ST is your hourly work rate;

Zd - your costs for gasoline (optional item in the calculations);

Zmat - the quantity or cost of your consumables;

AO - depreciation of your welding equipment (depreciation is taking into account the natural wear and tear of the equipment).

This method of calculating the cost of welding work is extremely simple and allows you to evaluate the work for both a production welder and a home craftsman. But keep in mind that this is the simplest formula. With its help, the estimate for welding will be undetailed and primitive.

If you perform technologically complex work, then you should think about more serious methods for evaluating your work. Don't forget that when doing homework, prices can be quoted in any currency. And when working in production, only state currency is used.

Factors influencing price

The cost of a weld depends on various factors. Therefore, service companies offer a similar service for different amounts of money. The following affects the price of welding work:

  • Material thickness.
  • Seam size.
  • Material for making the product.
  • Welding type.
  • Workload.
  • Season.
  • Working conditions.
  • Product diameter.
  • Qualification and experience of the master.
  • Type of equipment used.
  • Urgency of order fulfillment.
  • Difficulty of work.
  • Rating and prestige of the company.

Welding work

Welding work

PRICES FOR WELDING WORKS

Prices for welding services are approximate. The final price is determined by the master after a conversation with the customer, and depends on the complexity of the work, the materials used, and the volume of work.

PRICE LIST FOR WELDING WORKS

TYPE OF WORKDESCRIPTIONUNIT.PRICE
Metal welding
1Welding work including materials– argon – arc – gas – semiautomatic.cmfrom 20 rub.
2Pipe weldingby any methodjointfrom 150 rub.
3Make a garage 4x6 sheet 2mm, roof 2x pitched, gate 2x2.5 The whole structure is bolted. Wicket, iron door, size 2.05×0.80 steel 2mm is paid separately. from 57,000 rub.
4Manufacturing of metal structures (cost per finished product)Prices are indicative. The final price is determined by the master and depends on the complexity, materials, volumes
4.1Welded fencesgates, barsp.m.from 600 rub.
4.2Fencechain-link mesh, weldedp.m.from 1100 rub.
4.3Trade and warehouse equipmentshelving, racks, furniturep.m.from 1800 rub.
4.4Metal products / metal structuresaccording to customer drawingstonfrom 45000 rub.
4.5Change house (frame)from 6000r
5Manufacturing of fences
5.1Simple metal weldedm2 m.p.from 800 rub. negotiable
5.2From meshm2 l.m.negotiable
5.3From corrugated sheetm2 l.m.negotiable
6Manufacturing of gratings
6.1Simple weldedm2from 2000 rub.
6.2Swingm2from 4000 rub.
6.3Inflatedm2from 3000 rub.
6.4Forged decorativem2from 8000r.
7Manufacturing of fencesincluding installation
7.1Simple weldedm2from 1500 rub.
7.2Non-standard decorativem2from 3000 rub.
7.3Simple portablem2from 1300 rub.
8Manufacturing of stairs, railings, canopiesThe price includes installation. The final price is determined by the product model
8.1External stairs– frame – painted steel fences – stainless steel fences PC.

m.p.

m.p.

from 30,000 rub.

from 3000 rub.

from 6000 rub.

8.2Technical stairs-vertical – marching – transitions – platforms and areasm.p. from 1500 rub. from 3000 rub. from 3500 rub. from 4000 rub.
8.3Stainless steel railingsm.p.from 3500 rub.
8.4Wooden railingsm.p.from 8000r.
8.5Canopies over the entrancem2from 7000 rub.
8.6Polycarbonate canopiesm2from 2500 rub.
9Field work of a welder at the customer’s premiseswith an order amount of 6000 rubles.
Manufacturing of garage doors
Unit Change Price
1Swinging garage doors of standard size 2 x 2.5 m This design consists of: 1. Frames - profile 60x40 or corner 63x4; 2. Frame – profile 40x25; 2. Cloths – sheet 1.5 mm; 3. Locking hinges 4. Locking device; 5. 2 valves; PC13000 RUR
2Swinging garage doors are not standard sizesFor 1 sq.m.3000 rub.
3Garage doors with standard wicket size 2 x 2.5 mPC17000 rub.
4Ordering garage doors less than 5 square meters will cost the same as standard onesPC13000 rub.
5Garage door installationPC.5000 rub.
6Gate delivery loading, unloadingPC.1500 rub.
7Replacing hinges on gates (remove old ones, install new hinges)4 things2000 rub.
8Installation of inserting a wicket into an existing gatePC3500 rub.
9Trimming gates, strengthening gates Various works with locksPieces Pieces2500 RUR 1000 RUR

How much will it cost to install radiators + install heating devices? Price table price list for the city of Kaluga and the Kaluga region.

RADIATORS
Type of workDescriptionUnit.Price
1Heating radiator installationWhen ordering one radiatorPC.5000 rub.
2Installation of a heating radiator (using electric welding)When ordering 2 or more radiatorsPC.4000 rub.
3Installation of a heating radiator (using gas welding)When ordering 2 or more radiatorsPC.5000 rub.
4Installation of a heating radiator with replacement/relocation of the riserPC.6000 rub.
5Installation of a heating radiator with a diagonal connectionPC.5000 rub.
6Dismantling a radiator with a riser loopPC.2500 rub.
7Installing a radiator on a finished connectionPC.2500 rub.
TOWEL RAILERS
8Installation of leads and jumpers for heated towel railsPC.7000 rub.
9Installation of terminals for heated towel railsPC.5000 rub.
10Installation of the liner to the heated towel rail from the riserPC.from 1500 rub.
11Inserting a branch into a riser with installation of a tapPC.500 rub.
RISERS
15Replacing the riserPC.3500 rub.
16Replacement of the riser with installation of a bypass and outlets for the heated towel railPC.8000 rub.
17Transferring the riserPC.4500 rub.
18Relocation of the riser with installation of a bypass and outlets to the heated towel railPC.9500 rub.
19Connecting the cold water/hot water/sewerage pipe to the plumbing fixturePC.1200 rub.
20Drilling holes in the wall up to 30 cm for a pipePC.500 rub.
21Drilling holes in the wall up to 60 cm for a pipePC.1000 rub.
22Visit of a specialist to the site– within the city of Kaluga – 20 km. from Kaluga - 30 km. from Kaluga – 40 km. from Kaluga – 50 km. from Kaluga – 60 km. from Kaluga – 100 km. from Kaluga free 500r. 1000 rub. 1250 rub. 1500 rub. 2000 rub. 3000 rub.

PRICE LIST FOR INSTALLATION OF HEATING IN A PRIVATE HOUSE

Installation of boilers and boiler equipment in Kaluga and the regionUnitPrice
1Installation of a wall-mounted boiler (single-circuit)Installation, connection to the chimney, connection to the heating systemPC.11500 rub.
2Installation of a wall-mounted boiler (double-circuit)Installation, connection to the chimney, connection to the heating system and hot water supplyPC.14000 rub.
3Installation of a floor-standing gas boiler up to 60 kWInstallation, connection to the chimney, connection to the heating systemPC.17000 rub.
4Installation of a floor-standing gas boiler up to 140 kWInstallation, connection to the chimney, connectionPC.24000 rub.
5Installation of an indirect heating boiler up to 300 l.PC.4500 rub.
6Installation of an indirect heating boiler over 300 l.PC.8500 rub.
7Installation of a direct heating boiler up to 300 l.PC.4500 rub.
8Installation of a direct heating boiler over 300 l.PC.7500 rub.
9Installation of a chimney with a diameter of up to 140mm.m.p.1700 rub.
10Installation of a chimney with a diameter of over 140mm.m.p.2300 rub.
11Installation of a boiler safety group1900 rub.
12Installation of expansion tankPC.2200 rub.
13Installation of a circulation pumpPC.2500 rub.
14Installation of the main distribution manifold up to 70 kWEtc.1500 rub.
15Installation of the main distribution manifold from 70 kW to 117 kWEtc.3500 rub.
16Installation of thermohydraulic distributor (GIDROSTRELKA)2500 rub.
17Installation of the pump groupInstallation, connection to the heating systemPC.2500 rub.
18Installation of a secondary heat exchangerPC.5500 rub.
19Installation of a diesel fuel tankPC.from 7500r.
20Electric installation workfrom 5700 rub.
21Commissioning works5400 rub.
Installation of heating devices in Kaluga
1Installation of a heating device (radiator, floor convector)– bottom connection – bottom connection to the wall – side connection to the floor – side connection to the walldot2500 rub. 3500 rub. 3500 rub. 4900 rub.
2Installation of an in-floor convectordotfrom 4500 rub.
3Installation of a heated towel railfrom 2500 rub.
4Installation of a “warm floor” systemLaying insulation, mesh, expansion joints. Pipe laying m21600 rub.
5Installation of the manifold cabinet– external – internal2000 rub. 6000 rub.
6Installing a thermostatPC.500 rub.
7Collector installationPC.4000 rub.
8Installation of risers from different materials– polypropylene – metal-plastic – copper – cross-linked polyethylenem.p.500 rub. 400 rub. 600 rub. 400 rub.
9Installation of heating mainsup to 32 from 32 to 100m.p.85 rub. 150 rub.
10Stroba brickD16 D20 D25-28 D32 D40 D50-57 D63 D100m.p.200 rub. 250 rub. 350 rub. 400 rub. 450 rub. 500 rub. 550 rub. 1500 rub.
11Stroba concreteD16 D20 D25-28 D32 D40 D50-57 D63 D100m.p.300 rub. 350 rub. 400 rub. 450 rub. 750 rub. 1000 rub. 1500 rub. 2500 rub.
12Punching holes in a main wall (brick)D16 D20 D25-28 D32 D40 D50-57 D63 D100m.p.500 rub. 550 rub. 600 rub. 1500 rub. 1500 rub. 2500 rub. 2500 rub. 2500 rub.
13Heating system wiringInstallation (laying) of a pipeline from the collector or riser to the heating devicem.p.300 rub.
14Pressure testing of the heating systemManufactured according to manufacturer's requirements5500 rub.
15Pressure testing of an underfloor heating system (warm floor)Manufactured according to manufacturer's requirements5500 rub.

You can send your thanks to the welder using the link. Give thanksSupport the creativity of the welder

The technician's phone number is here! Click!

You can call +7 Oleg. Write to email with questions, I will be glad to help you.

Varieties

The following types of electric welding are distinguished:

  1. Manual arc . It is easy to implement and does not require complex technical support. Suitable for welding stainless steel and ferrous metals only.
  2. Welding using TIG technology . Makes it possible to work with vector non-ferrous metals and alloy steels.
  3. Semi-automatic . This is a modern and high-quality type of welding. Often used by home craftsmen. The filler material is supplied automatically. The work is simple and of high quality.
  4. SPOT . It is used in car service centers when carrying out body repairs. Requires the use of sophisticated equipment. It is used extremely rarely at home.

Based on the material being worked with, welding can be:

  • Copper.
  • Aluminum.
  • Cast iron.
  • Of stainless steel.
  • Alloys.

Depending on the type of equipment used, welding can be carried out using:

  • Welding transformer.
  • Welding MMA rectifiers.
  • Equipment operating using an inverter circuit.

Welding machines can be:

  • Ordinary, without additional functions.
  • With the “HotStart” option (facilitates initial ignition).
  • With the “AntiStick” function (prevents the device from overheating).
  • With the “ArcForce” option (prevents the electrode from sticking to metal surfaces).

Depending on the performer, welding work can be carried out:

  1. On one's own.
  2. Private master.
  3. Service organization specialist.

Approximate prices

The estimated cost of a seam made by electric welding is shown in the table below.

Thickness of sheet material, mmCost of a centimeter of seam in rubles
1-315
4-620
7-1025
10-1435
15-2050

Working in an unheated room during the cold season costs 20% more. Working in cramped conditions will cost 30% more. about 2,000 rubles for a welder to visit the site with equipment .

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]