GOST 10702-2016 GOST 1050-2013 GOST 19281-2014 GOST R 55374-2012 GOST R 53932-2010 GOST 103-2006 GOST 2879-2006 GOST 2591-2006 GOST 2590-2006 GOST 5950-200 0 GOST 1051-73 GOST 7417-75 GOST 19442-74 GOST 14082-78 GOST 23705-79 GOST 23270-89 GOST 18907-73 GOST 22411-77 GOST 14119-85 GOST 18968-73 GOST 1414-75 GOST 28393-89 GOST 30136-95 GOST 1 6523-97 GOST 19265 -73 GOST R 51285-99 GOST R 52132-2003 GOST R 52544-2006
- gost-30136-95.pdf (329.11 KiB)
GOST 30136-95
GOST 30136–95 (ISO 8457−1-89) Group B22
INTERSTATE STANDARD CARBON STEEL TANK OF ORDINARY QUALITY
Specifications
Carbon steel wire rods of common quality. Specifications
MKS 77.140.60 OKP 09 0200
Date of introduction 1998−01−01
Preface
1 DEVELOPED by the Technical Committee of Ukraine No. 4 “Cast iron, rolled sheets, heat-strengthened long rolled products, products for rolling stock, hardware and consumer goods”; Institute of Ferrous Metallurgy (IFM) INTRODUCED by the State Committee of Ukraine for Standardization, Metrology and Certification
2 ADOPTED by the Interstate Council for Standardization, Metrology and Certification (Minutes No. 8 of October 10, 1995) The following voted for adoption:
State name | Name of the national standardization body |
Republic of Belarus | Belstandart |
The Republic of Kazakhstan | Gosstandart of the Republic of Kazakhstan |
The Republic of Moldova | Moldovastandard |
Russian Federation | Gosstandart of Russia |
The Republic of Tajikistan | Tajikgosstandart |
Turkmenistan | Main State Inspectorate of Turkmenistan |
The Republic of Uzbekistan | Uzgosstandart |
Ukraine | State Standard of Ukraine |
3 This standard corresponds to the international standard ISO 8457−1-89 “Steel wire rod. Part 1. Dimensions and tolerances" in terms of assortment, main parameters and dimensions
4 By Decree of the State Committee of the Russian Federation for Standardization, Metrology and Certification dated May 21, 1997 N 188, the interstate standard GOST 30136–94 was put into effect directly as the state standard of the Russian Federation on January 1, 1998.
5 INTRODUCED FOR THE FIRST TIME
6 REISSUE
1 AREA OF USE
This standard applies to ordinary quality carbon steel rods intended for drawing wire and other purposes.