Steel X12MF: characteristics and description of an excellent grade for making the first knives

In making knives, the most important thing is the material from which the blade is made. Widely used for these purposes from the middle of the last century to this day remains X12MF - a steel whose characteristics are suitable for the manufacture of parts for machines, gears, punches and for cold forging of knives, saws, cutters and cutters. Manufacturer Bob Dozier used this metal all his life to make knives, considering it the most worthy. An identical analogue of X12MF in America is D2 steel.

Knife made of steel X12MF.

Description of steel

Knives, when using X12MF steel, acquire a sharp cutting edge, and are able to maintain this quality in any adverse conditions. This alloy was originally developed for the needs of the engineering industry. But it should be taken into account that X12MF steel is not resistant to corrosion. Therefore, after using the knife, it should be dried and treated with Vaseline oil.

Explanation of the name

According to GOST 5950-2000, X12MF steel is classified as an alloyed ledeburite grade, which indicates a high carbon content. The decoding of the abbreviation includes the properties of steel of this grade. The letters mean the following:

• X – presence of chromium;
• 12 – percentage of chromium;

• M – presence of molybdenum;
• F – presence of vanadium in steel.

Owner reviews

Igor R., Leningrad region: “I have several knives for hunting and tourism. Experience has shown that X12MF steel is just right! I have a folding knife from this brand. All summer I went foraging for mushrooms, went fishing, but didn’t pay much attention to its care. The knife is still sharp, no signs of corrosion.”

Sergey N., Penza region: “Most of my knives are from X12MF. They darken a little, but there is no corrosion. With frequent use, sharpening lasts for 2 years. I recommend to everyone!"

Due to their high performance qualities and low cost, products made from X12MF steel are widely used in production and everyday life. They can serve a person for a long time without losing their properties. To do this, it is necessary to use knives for their intended purpose and take proper care of them.

Chemical composition

The exceptional quality of the metal alloy is due to its special composition:

The alloy contains a small amount of sulfur and phosphorus. They are harmful impurities that reduce performance characteristics. And they make steel brittle. But you can feel the negative impact of unwanted additives only with an increase in the percentage of carbon.

Table: the importance of chemical elements in steel

Alloy production

The alloy is produced strictly following the technological process. Be sure to adhere to the algorithm corresponding to GOST. In this case, the characteristics of the materials are taken into account. Production is carried out as follows:

Steel strips X12MF.

• Casting of molten metal into a finished mold takes place in some cases in accordance with customer requirements. Allowances for further processing of the workpiece must be taken into account;
• An obligatory step is firing, since when the alloy cools, the process of its dendritation is possible. Which can cause uneven deposition of carbides, this affects the uniformity of the metal alloy;
• improvement in the quality parameters of steel is obtained during the forging process of the part. This treatment refines the grains and helps fill all the voids in the crystal lattice of the alloy.

The X12MF alloy, which is produced using a vacuum-arc remelting procedure, is quite highly valued. The process is quite complex and it will not be possible to cast it according to GOST in a home workshop. The alloy is produced only from trusted manufacturers.

Material X12MF Chelyabinsk

Not a single production can operate without steel, be it heavy engineering or the manufacture of household electrical appliances. There are many brands of this product, as well as a large number of dispensing forms. Our company sells X12MF material in large quantities and with a minimal margin. To clarify the properties and characteristics of a particular brand, you can contact the company’s managers.

Like all products, X12MF material is purchased from leading manufacturers. Therefore, we are ready to provide a quality guarantee with full responsibility. The minimum number of intermediaries determines the low cost. Coupled with fast delivery, this enables our business partners to conduct stable and mutually beneficial cooperation.

In addition to tempering, in the form of one or another part (blank), our company carries out metal processing. All events undergo strict control for compliance with GOST and rules. The specialists of our company carry out such work as galvanizing, creating parts according to customer drawings, producing castings, manufacturing various profiles and much more.

Having the latest equipment and vast experience in our arsenal, we can offer product testing for a number of parameters, such as strength characteristics, chemical composition, alloy purity, and so on.

Each buyer is offered a huge range of products in various formats, as well as current services and works. To quickly understand and choose a product that meets your needs, you need to contact the company manager and receive detailed information on all issues of interest.

Pros and cons of steel

The positive and negative characteristics of Kh12MF steel can be considered in the following table:

Advantages and disadvantages

Comparing X12MF and 95X18

The main advantage of 95X18 steel over the X12MF alloy is its corrosion resistance. This property is better suited for knives of constant use.

A 95X18 blade will withstand constant contact with vegetables, meat and other products.

These knives are most suitable for working in the kitchen. It is quite difficult to determine which steel is better, 95X18 or X12MF. This is due to the fact that the working properties of the alloys are very different. The quality characteristics of 95X18 are as follows:

1. Steel refers to stainless steel.
2. Holds an edge perfectly.
3. Hardness during hardening 57-59 HRC.

Is Damascus better?

When comparing Damascus steel with X12MF alloy, professionals give a clear answer. And it is not in favor of Damascus. The reason for this is low resistance to corrosion processes.

Damascus begins to rust if it does not come into frequent contact with water. With such characteristics, the blade requires constant care. You will have to dry the blade and treat it with special liquids.

Blanks for future knives, X12MF steel.

Comparison with analogues D2 and K340

The Russian analogue of X12MF steel is alloy 95X18.

Initially, 95X18 steel was used to strengthen building structures, and later began to be used for the manufacture of knives. This knife is easier to sharpen than a blade made from X12MF. But the latter will be stronger.

Among the foreign ones, American D2 and K340 steel from the Austrian-Swedish concern Bohler Uddeholm are similar in composition and characteristics.

Knives made of D2 steel.

Experts believe that D2 and X12MF are similar in chemical composition and mechanical properties; there are no significant differences. You can choose a knife from one steel or another, based simply on personal impressions, which one you like best.

D2 steel is also a high carbon alloy steel. Originally developed for the production of cutting teeth. The Rockwell hardness of this steel ranges from 57 to 61 units.

K340 steel is more resistant to corrosion; the alloy does not contain harmful sulfur and phosphorus. The hardness of steel is 62-64 units. The main disadvantage of the K340 is its high cost.

Physical properties of alloy Kh12MF

Products made from X12MF alloy are not intended for throwing or bending. Violation of the production process, incorrect temperature applied, can affect the quality of steel in the most unpleasant way. In this case, the blade will be easy to break. When properly processed, the knife has the following properties:

• there is no need to sharpen the product frequently;
• the blade copes well with planing;
• steel can work perfectly in the temperature range from -40 to +40 degrees;
• short-term thermal exposure will not lead to damage to the product;
• the presence of vanadium extends the service life of the blade;
• good resistance to oxidation;
• the homogeneous structure will not allow the knife to break or crumble.

Mechanical properties

Steel grade X12MF has the following mechanical properties:

• corrosion resistance;
• excellent strength;
• excellent cutting abilities.

Piece production of knives is quite labor-intensive and not every craftsman can handle it. But there are exclusive products in nature. The unusually sharp blade is in great demand among hunters. With this knife you can quickly cut up an animal carcass.

Examples of knives made of X12MF steel.

Characteristics of steel

The mechanical characteristics of steel depend on the chemical composition of the alloy. Proper heat treatment is also very important. Any steel has 5 main characteristics:

• hardness - resistance to physical influences;
• rigidity - resistance to mechanical damage (chips, cracks);
• wear resistance;
• anti-corrosion resistance - resistance to rust;
• duration of use of the blade without sharpening.

For knife steels, the most important characteristic is Rockwell hardness. The higher it is, the longer the product will last and the sharpening will last. For the X12MF brand, this figure varies in the range of 61 - 64 units. This is quite a high value.

Analogs

The American analogue of steel is an alloy called D2. Its structure is almost identical to X12MF steel. But the concentration of chromium in it is slightly higher. The Japanese analogue is labeled as SCD11. It is used in the manufacture of knives and other cutting objects.

But this steel contains a little more carbon, which affects its toughness.

Germany also has a similar alloy with the marking - LO-R 4528. Among the Russian analogues we can name the alloys: Kh6VF, Kh12VM and Kh12F1. But they are more substitutes than analogues. Their hardness indicators are lower and their sharpening sharpness is somewhat lower. But they are more resistant to oxidizing agents.

Alloy Application

Steel grade X12MF belongs to the category of knife alloys. It was used to make woodworking tools. It was also used to make knives and cutting accessories for the printing industry.

In Soviet times, it was indispensable in engineering production.

A few more examples.

Manufactured electrical equipment and cold forming tools. Also, since the middle of the last century, they began to produce knives for hunting, kitchen and tourist purposes. Today it is used for the manufacture of:

• rolling dies;
• body and molding dies;
• all kinds of matrices;
• drawing boards;
• rollers of various shapes;
• instrumental cutters.

X12MF steel is also used in aircraft, motorcycle and shipbuilding. Many household tools are made from this alloy.

Rules for caring for X12MF steel

To extend the service life of products made from X12MF steel, they should be looked after. The optimal sharpening angle for such knives is 35 degrees. It should be noted that the sharper the blade, the faster it becomes dull. By following these rules, your blade will serve you for a long time:

1. Using the blade as a lever can break it, be careful. The base of the handle may also become loose. You should not put force on the butt, cutting hard and blunt objects.
2. Frequent use of the blade in acidic and alkaline environments can cause pitting corrosion. The appearance of the product changes greatly in a negative direction. Before the darkened spots begin to catch your eye, you should carry out preventive polishing of the knife. It is done once every six months, using fine-grained diamond belts.
3. After using the knife, you should wipe it dry and lubricate it with mineral oil, Vaseline or Ballistol.
4. The wooden handle should be coated with antiseptic agents to prevent the spread of bacteria and fungus.
5. The knife should not be used as a throwing weapon. X12MF steel is not designed for such loads; the blade may break.
6. Keep your knife in a sheath to protect the sensitive blade from corrosion.

By following these simple rules, your blade will last you longer. You need to order edged weapons only from trusted craftsmen. Overheated or, conversely, underheated steel does not have the advantages that were mentioned above.

How to care

In order for knives made from this steel to serve for a long time, you need to follow simple care rules:

• wash and dry after each use. You need to wash it especially thoroughly if it has been in contact with acidic foods;
• lubricate the blade with oil once a month;
• To sharpen a knife, use a special whetstone with diamond chips;
• keep the blade in a sheath to prevent fungus from developing;
• treat the handle with an antiseptic.

Sharpening a knife is a very important process, so you need to use a high-quality diamond stone.

With proper care, the product will last a long time and retain its properties. Many people use such knives for more than one season, and no serious shortcomings are identified.

Knives made of steel X12MF

Kitchen knives made of X12MF steel are rare. This alloy is mainly used to make hunting tools. It is often used for the production of Yakut knives.

Bakhycha

The product is lightweight and fits perfectly in your hand. The handle contains duralumin elements, which give the knife a magnificent appearance. The knife is used for skinning an animal, and can also be used to cut fish, meat and other food products. Blade characteristics:

• handle – 115 mm;
• blade – 110x36x4 mm;
• blade steel grade – X12MF;
• handle material – walnut;
• the shape of the descent on the blade is straight;
• type of sharpening - one-sided.

Small Bakhych knife.

Cervical

A universal tool, used to perform various business operations. Planing, cutting, making holes is the main direction of the blade. They can also be used to cut up food perfectly. The sheath and loop allow the blade to be worn around the neck, hence its name. Blade characteristics:

• handle length – 110 mm;
• blade parameters – 110x22x4 mm;
• blade steel grade – X12MF;
• handle material – Karelian birch;
• bolster - cupronickel;
• the descent of the blade is straight;
• sharpening is one-sided.

Yakut knife - neck knife.

Khotonoh

The knife is used for hunting; it is excellent for deboning meat and cutting fish. The set includes a sheath made of genuine leather. All blades are tested and have a quality certificate. A warranty period of 12 months is also required. Blade characteristics:

• handle length – 122 mm;
• blade parameters – 120x26x4 mm;
• blade steel grade – X12MF;
• handle material – Karelian birch;
• the descent of the blade is straight;
• sharpening is one-sided.

Cutting hotonoh.

Bychak

The knife is a universal tundra product. The rounding at the tip of the blade is not very sharp. This is done to prevent cutting the skin when cutting the animal. The blade comes in different sizes, depending on its purpose. Blade characteristics:

• metal – alloy grade X12MF;
• handle length – 135 mm;
• blade parameters – 150x25x4 mm;
• handle material – birch bark and wenge;
• prityn - duralumin;
• sharpening – one-sided;
• The descent of the blade is straight.

Universal tundra knife goby.

The best manufacturers in Russia

In Russia, knives made of X12MF steel are very popular. This is due to the fact that blades made from it are highly durable and can be sharpened for a long time. The cost of the products is very affordable.

We also recommend that you familiarize yourself with the current rating of the best steels for knives.

If the production technology is violated, steel loses some of its properties!

Therefore, you need to buy products only from trusted manufacturers, otherwise the knife may not withstand the first serious use. Excellent blades are made, for example, by the Albion forge (Nizhny Novgorod region), LLC PP Kizlyar, . These enterprises use both the latest production technologies and the experience of old, honored masters. Therefore, the products are of high quality.

Production at the forge