Rating of the best sandblasting guns for 2022

1. Sand tank.
2. Neck for pouring sand into the tank.
3. Pressure gauge showing inlet air pressure.
4. Compressor connection.
5. Forming a mixture of air and sand.
6. Air-sand mixture supply hose.

The principle of operation of the device is as follows: under high pressure, air is supplied from the compressor to a distribution point ( 5 ), where sand and air are mixed (for pressure types of sandblasting). from the tank ( 1 ). The resulting mixture goes through the hose ( 6 ) to the nozzle, which throws sand onto the workpiece. At the compressor connection point ( 4 ) there is an additional filter that filters the air from condensate so that the working mixture is dry.

• Home Appliances

  Retirement brushes: which electric spray gun is best to buy for your home?

The design and operating principle of a sandblasting machine is very similar to a spray gun, with the only difference being the material used for surface treatment. A sandblaster is a pneumatic tool, so you will need a good compressor to operate it. If you already have a compressor for your car, you can use it.

Description of the device

These tools differ in characteristics and principles of operation. However, they contain identical structural elements:

• compressor;
• a gun with a nozzle;
• abrasive tank;
• control device;
• connecting hoses;
• storage receiver.

The most important element is the compressor, which serves to increase the pressure of the air flow. They are divided into low-power, medium-power and high-power units. The operation is controlled automatically, turning the device on and off, adjusting the pressure indicator.

The best and most expensive models are equipped with compressors and a special system that allows them to shut down in the event of a breakdown, as well as in the event of power surges.

The advantages of automation are as follows:

1. Complete stop of the device if the operator’s hands lose sight of the nozzle.
2. Possibility of switching the device into working and idling mode.
3. Management of additional functions.
4. When the sand level drops, it starts signaling.

What to look for when choosing a model? On the quality of assembly and dimensions of hoses for air and sand, as well as for removing the abrasive component. The device’s power and performance, as well as the quality and duration of operation, directly depend on these parameters.

Features and principle of operation

Sandblasting units are used to remove various types of contaminants from surfaces. Manufacturers produce several types of installations that are similar in principle: thanks to compressed air, an abrasive agent or sand flies out of the nozzle at great speed, crashing into the dirt and effectively removing it. These devices are used to clean buildings and metal structures from rust, old paint, dust and dirt.

Sandblasting is divided into types, depending on the type of action and power. Thus, the division occurs into the following devices:

Based on the type of action, devices are:

1. Pneumatic (pressure). They quickly and efficiently deal with heavy dirt or thick layers of rust. We are ready to cope with any volume of work, which is why we enjoy deserved popularity at large enterprises. A distinctive feature of these devices is the following: compressed air enters not only the installation, but also the abrasive dispenser, which significantly increases the speed of the released air stream.
2. Vacuum. The operating principle is as follows: an abrasive substance is applied to the contaminated base, immediately picked up by a vacuum and again thrown onto the contaminated area. May be used for certain activities that may cause damage to surfaces in the immediate vicinity.
3. Injection. Distinctive feature: air and abrasive mixture are supplied through different hoses. The power of the unit is small, so the device is not able to cope with significant pollution over large areas. However, for delicate cleaning this is the most acceptable option.

Sandblasting treatment options

Thanks to such installations, it is possible to tidy up various types of surfaces using:

1. Easy cleaning – removal of minor rust and scale. The result is a clean base, but some dirt may remain in hard-to-reach areas.
2. Medium cleaning – involves more thorough measures to remove paint, dirt and rust. Result: there remain pinpoint areas covered with corrosion.
3. Deep cleaning, providing ideal cleansing of all kinds of contaminants. It is used if the next stage of work is to apply paint and varnish.

Types of installations

Sandblasting machines are available in two types, the differences between which are indicated in the comparative table:

Popular models may also be:

1. Stationary. Installed in production workshops. Equipped with a built-in filtration system, connected to powerful ventilation systems, they are used for processing individual objects and parts, as well as small surfaces.
2. Mobile. As a rule, they are small-sized or homemade, made independently at home, using step-by-step instructions provided on the Internet. They can be used to process tanks, large equipment, building facades, and so on. Moved to a specific location, depending on the need.

Classification

Today, two classifications of sandblasters are offered. The first classification divides the device into three types according to where it is used:

Another type of classification is based on the method of supplying the abrasive:

There are a large number of different classifications

Areas of application of sandblasting devices

The most common industry is body repair. This technique helps to quickly and effectively remove old paint, rust, grease and other contaminants from the surface. The device is often used when repairing disks: if a part is peeling, dented or damaged, then before starting to restore it, they first carry out high-quality cleaning, and then paint.

What are the advantages of a sandblasting unit? The result of metal grinding with this tool is unique, which cannot be achieved manually. This method removes even the most pinpoint elements of corrosion “hidden” in pits, minor pores and microcracks, which allows minimizing the rusting process of the metal base. Products cleaned in this way last much longer and are less susceptible to corrosion. As for the surface, it turns out surprisingly smooth. If there are no scratches, the primer and paint cover the parts perfectly.

In addition to car repairs, sandblasting devices are widely used in:

• furniture production;
• ship repair and shipbuilding;
• during major repairs of construction projects;
• wood processing industry;
• when cleaning foundations from brick and concrete;
• in the process of metal engraving;
• creating intricate patterns on glass;
• pre-treatment of products before applying thermal spraying and the use of galvanic operations;
• when matting ceramics and glass.

Powerful devices made of high-strength material and endowed with special functions through the use of various attachments are used for drilling holes, grooves and grooves. Designer imagination using such a unit allows you to treat the surface in such a way that the material “ages” and acquires a vintage look.

Advice from experts on working with sandblasting

It does not matter which company is better to purchase the product, and whether it is in the rating of quality products, Russian or Chinese production, budget or at a significant price. The main condition of work is compliance with safety regulations. A branded tool can cause harm to human health, causing the development of serious pulmonary diseases, or lead to injury due to the significant speed of abrasive ejection from the nozzle.

To avoid unpleasant situations and maintain your health, you need to listen to these recommendations:

1. Before work, wear closed shoes made of thick material.
2. Don’t forget to wear a high-strength special overall.
3. Wear a protective helmet.
4. Protect your hands with leather gloves.

Some “daredevils” wear only a regular respirator when outdoors, but the best option would be to have a helmet with an autonomous air supply. If actions are performed indoors, then this attribute is mandatory.

It is worth considering that powerful units are not silent, therefore, in order to avoid damage to the hearing organs, it is worth wearing headphones with sound-absorbing functions under the helmet. Can also be built into a helmet.

Features of premises for working with the unit

The effectiveness of any work directly depends on the correct organization of the workplace. Sandblasting will function safely and reliably in a room with normal humidity levels. Otherwise, the process may be significantly delayed and productivity may decrease. If the humidity is too high, measures are taken to reduce the indicator. For these purposes, special dryers are installed at the facility. The best manufacturers produce popular models equipped with such functionality.

Air purity is of great importance. This is achieved through the use of filtration systems. As a rule, they are already built into the devices, which makes it possible to free the air from particles of dust, dirt, and oil. If the device operates in a closed space, then the object must be able to quickly and efficiently be cleaned of sand. The best option is to completely seal the room, where the remaining sand will fall into special tanks through holes made in the floor. After preliminary sifting, it can be reused.

Sandblasting or shot blasting?

It is worth noting that, paradoxically, sandblasting equipment/apparatuses can easily be called shot blasting equipment/apparatuses. Specialists will understand what’s going on (the principle of operation and the result are the same), but the average person, a non-specialist, can be seriously stumped because of the difference in names.

Geography of supplies of shot blasting, sandblasting chambers and shot blasting equipment: St. Petersburg, Moscow, Ryazan, Kazan, Izhevsk, Samara, Yekaterinburg, Chelyabinsk, Kaluga and many other cities of Russia.

You can always buy a shot blasting chamber of the required performance and configuration from the Aox company.

Tweet

Share

Share

Plus

Cool

Similar articles

• Shot blasting chamber: why Aox?

• Job description for shot blasting machine operator

• Automation of shot blasting. Specialized installations

• Operation of an overhead conveyor as part of shot blasting and shot blasting installations

• Reinforced electric motor for shot blast turbine

• Economics of Sandblasting and Shot Blasting

• History and types of abrasive materials (part 2)

How to choose a device

According to buyers, it is necessary, first of all, to pay attention to the weight of the product. The design should not be heavy. In addition, it is advisable to equip it with a chassis to facilitate transportation. As for the tank, its characteristics must meet international safety standards. When purchasing, you need to request an inspection certificate from the seller.

Which product is better to buy depends on the preferences of the master. But there are certain selection criteria that must be taken into account. Moreover, the brand and rating are not fundamental. The design of the pipeline is of great importance. It is worth keeping in mind that the simpler it is, without fittings and bends, the more powerful the unit. You need to pay attention to the diameter of the hole. The optimal figure is 32 mm or more.

In order to avoid mistakes when choosing, it is necessary to review the products and read the reviews. It is necessary to pay attention to the following points:

• ability to function with different granular materials;
• high assembly reliability;
• the presence of an automatically closing filling valve or damper;
• presence of a feeding container;
• equipped with an abrasive material dispenser, shut-off valves for air inlet and outlet;
• presence of an inspection hatch.

For a powerful compressor, a nozzle with a large diameter is assumed. This is the only way to increase productivity. To choose the right air gun, you should pay attention to the following recommendations:

• processing of wood, brick or concrete is carried out by a unit with high productivity, but low jet power;
• It is better to clean metal and glass with a strong jet of abrasive.

There are several ways to purchase a device of this type: through one of the many online stores (order online) or delivery directly from China via the Ali Express online resource. You can also contact a specialized store, where you can then arrange the purchase of the selected equipment. The last option is advantageous in that the sales manager will help you make a choice, tell you about new products, give certain recommendations, and provide quality certificates.

A person with certain skills and tools can make the device with his own hands. The Internet will tell you how to build your own version. Let the unit not be too powerful, but it will provide significant assistance during repairs.

Selecting a pistol by technical characteristics

To buy a quality sandblasting device, you need to pay attention to the following parameters:

1. Performance. This indicator reflects the volume of air in liters that passes through the compressor under pressure per unit time.
2. Air pressure. Typically, for high-quality processing of concrete and metal products, a pressure of 6–8 atmospheres is sufficient; for decorative work, 3–5 atmospheres is sufficient. Since the pressure in the compressor and at the outlet of the gun is not the same, the hose and nozzle must have different diameters.
3. Compressor power, number of revolutions/minute. These parameters also affect the overall performance of the device and should be taken into account when purchasing.

To process complex products, you should choose a gun that operates with the maximum possible pressure (usually 10 atmospheres), but it is not suitable for delicate substrates - the surfaces can be severely damaged

Other technical parameters that are worth paying attention to are:

• nozzle material – the most durable parts are considered to be those made of alloys with the addition of cobalt, tungsten carbide (ceramics and cast iron deteriorate much faster);
• type of nozzle fastening - a threaded pin is considered more reliable, since the union nut can become loosened over time due to constant vibration;
• ergonomics of the handle and shut-off and control valves - the more convenient it is, the easier it will be to work with the gun;
• the presence of mounting holes - with their help you can secure the gun and move the surface to be treated relative to the device itself.

Rating of the best sandblasting guns for 2022

Hose feed

Sorokin 0.9

One of the most popular designer brands in Russia. Engineer Sorokin is the author of a large number of special equipment, including sandblasting guns connected to a compressor. The model differs in that it is produced with an upper tank for abrasive, which makes working with it more convenient and simpler. Reservoir with a capacity of 0.9 l. Designed for cleaning small surfaces. It is especially popular among home craftsmen.

The average price is 3000 rubles.

sandblasting gun Sorokin 0.9

Advantages:

• performs subtle actions;
• light weight;
• comfortable to use;
• durable;
• functional.

Flaws:

• significant cost.

Patriot GH 166 B

The products are manufactured in China. The main difference is the lack of capacity. The abrasive is supplied through a pipe that comes with the kit. It is immersed in a container of sand, after which the gun is connected to the compressor. Despite the low cost, the product is quite functional and allows you to process significant surfaces.

Price – 550 rubles.

sandblasting gun Patriot GH 166 B

Advantages:

• reliable;
• service life;
• cleaning hard-to-reach areas;
• insignificant weight;
• a budget option.

Flaws:

• not identified.

Wester SSP – 20

The Chinese manufacturer tried to create an amazing assistant for home craftsmen. Despite the mediocre technical characteristics, the device is able to efficiently clean small surfaces. Equipped with a small compressor, considered “quiet”.

The average price is 1300 rubles.

sandblasting gun Wester SSP – 20

Advantages:

• compactness;
• ease of use;
• reliability;
• service life;
• good value for money;
• It doesn't make much noise.

Flaws:

• lack of high technical characteristics.

Matrix 57328

It is distinguished by the absence of an abrasive tank and low weight - 1.2 kg. The gun is made of high-quality metal that is not susceptible to mechanical damage. Continuous operation time – from 8 to 12 hours (maximum). It is equipped with a standard tank, but sand can also be taken from a bucket. Quickly and effectively copes with cleaning machine bodies.

The product can be purchased at a price of 1119 rubles.

sandblasting gun Matrix 57328

Advantages:

• light weight;
• easy to operate;
• comfortable;
• affordable price;
• quality of cleaning;
• the nozzle is made of durable steel;
• functional;
• efficiency of sand suction into the hose;
• equipped with branded fittings;
• the throughput channel is not clogged;
• can be improved.

Flaws:

• lack of maneuverability;
• short intake hose;
• It is advisable to equip it with a powerful compressor.

Rock Force RF – HSB – II

Produced by a leading Belarusian company, using modern production facilities in Taiwan. High-strength plastic is used in the manufacture of the case, which completely prevents corrosion. The tank for abrasive material is mounted at the top. Sand is filled through the neck in the rear part, which is closed with a rotating lid. The flow regulator is located at the front.

The average cost of production is 4510 rubles.

sandblasting gun Rock Force RF – HSB – II

Advantages:

• resistant to overheating;
• possibility of non-stop operation for 8 hours;
• Rapid connection makes it easier to connect to the hose;
• durable;
• multifunctionality.

Flaws:

• weight 2 kg;
• may break if dropped;
• due to the large upper tank, operator visibility is minimal;
• price, but the device is worth it.

Barrel feed

Kraftool Expert Qualitat 06583

The German manufacturer launched production of goods in China, which made it possible to keep the price minimal and the quality worthy of attention. The model consumes 340 liters of air within one minute. The inlet fitting is ¼ inch in diameter. The hose from the compressor is attached using threaded connections. It fits well in the hand thanks to the textured handle. To prevent the trigger from pinching your ring finger, the handle has a separator. The device can be easily hung on a hook using a loop, thereby freeing the operator’s hands. Water can be taken from a water tap.

The average cost is 1509 rubles.

sandblasting gun Kraftool Expert Qualitat 06583

Advantages:

• there is a hole on the case for hanging;
• reliable grip;
• ergonomic handle;
• comfortable use minimizes fatigue;
• not damaged when dropped;
• lack of plastic components;
• performance;
• high-quality nozzles;
• Full visibility for the operator thanks to the lower tank.

Flaws:

• appearance may deteriorate over time;
• kinking the hose leads to poor air supply;
• the threaded connection does not allow you to quickly connect the hose to the compressor.

Mighty Seven SX – 3102

An American brand product has many advantages. It is equipped with a 700ml bottom tank and a stainless steel tube through which small particles pass. Although the pistol is plastic, this does not detract from its advantages. It has an unfolded shape with an angle of 110 degrees. This allows you to comfortably hold the device during operation.

Retailers offer high-quality products at a price of 3,430 rubles per unit.

sandblasting gun Mighty Seven SX – 3102

Advantages:

• ease of use of the trigger;
• uniform distribution of the load on the hand;
• reliable grip due to the relief of the handle;
• weight 350 g;
• possibility of continuous operation;
• can function with large factions;
• suitable for weak compressors;
• compact;
• possibility of use at height.

Flaws:

• performance;
• will not cope with paint;
• overcharge;
• If dropped, it may suffer mechanical damage.

Metabo SSP 1000

The German manufacturer offers its fans a high-quality device that has a built-in lower tank for abrasive. The body is made of metal and coated with paint. Thanks to the presence of a loop, it can be hung on a hook. The straight-through nozzle is made of hardened steel. The embossed tip makes it easy to remove. Product weight – 700 g, fitting with a diameter of ¼ inch, air consumption – 300 l/min.

The average cost is 1879 rubles.

sandblasting gun Metabo SSP 1000

Advantages:

• easy to use;
• cleans not only smooth surfaces, but also ribbed ones;
• ergonomic shape;
• can interact with various compressors;
• the hose quickly connects to the compressor;
• quality work.

Flaws:

• Over time, the appearance becomes unattractive.

Abac 756062

The main difference between the model is the aluminum tank with a capacity of 1 liter. Joins with just one touch. Light weight - 590 g. Convenient for cleaning areas. It enjoys well-deserved popularity among craftsmen due to its ease of use. The body is completely metal, there are no plastic structural elements at all. The product can withstand impacts and falls. The design is not afraid of scratches and other mechanical damage.

The average cost is 2120 rubles.

sandblasting gun Abac 756062

Advantages:

• simplicity and durability of the device;
• the operator's view is not blocked by the lower tank;
• the hose is quickly connected to the compressor;
• tank volume;
• presence of a hook for hanging;
• service life.

Flaws:

• sliding in hand;
• The metal casting of the body is not very neat.

Walmec 50316

The manufacturer focused on a completely metal body covered with rubber, which significantly increases its ease of use. There is a lower container for abrasive. The trigger is pressed with two fingers. Thanks to the protruding stopper on the handle, there is virtually no possibility of pinching the remaining free fingers.

The tank is made of aluminum, which prevents mechanical damage during a fall. Product weight – 920 grams, air flow – 500 l/min. For efficient operation, it is worth connecting a powerful compressor to the device. The presence of a hook on the back allows you to quickly free your hands.

If you study user reviews, the characteristics of the product are good. It allows you to quickly and efficiently remove rust, dirt, and paint from the surface, making the metal coating completely clean and shiny. Excellent performance is ensured by a 6mm nozzle, which makes it possible to use the unit for professional activities.

The average cost of products is 3589 rubles.

sandblasting gun Walmec 50316

Advantages:

• copes with dirty areas;
• continuous operation;
• service life;
• reliable;
• quality;
• multifunctionality;
• shockproof housing;
• tank volume – 1000 ml;
• weight;
• easy to use;
• safe if you follow the rules for working with it.

Flaws:

• It is recommended to connect to a compressor;
• sometimes the air line locking mechanism becomes clogged with sand;
• Not sold in all retail outlets.

Best PCP Air Rifles

Such models use tanks with air, which pushes out projectiles under high pressure. PCP rifles are distinguished by their power and increased ammunition flight speed.

EdGun "Leshy" (2 gen.)

4.9

★★★★★ editorial assessment

97% of buyers recommend this product

The folding design of the weapon makes it easy to store and transport. The process of bringing the rifle into combat mode takes a few seconds. One of its features is multi-caliber. The future owner can choose the material and barrel length - 250 or 350 mm.

The bullet ejection speed is 290 meters per second, the charger capacity is 8 projectiles. In the rear plug of the tank there is a filling port, which is protected from dirt and moisture by a rotating lid. The kit includes a fitting and spare rubber goods.

Advantages:

• small dimensions;
• possibility of modification;
• durability;
• ease of transportation;
• accurate shooting.

Flaws:

high price.

The second generation EdGun “Leshy” is suitable for hunting, recreational or training shooting in open spaces.

Ataman Carbine M2R 116/RB 6.35

4.9

★★★★★ editorial assessment

96% of buyers recommend this product

The rifle has virtually no recoil and is distinguished by high accuracy and accuracy of fire. The presence of a Picatinny rail allows you to install additional sighting devices for hitting objects from a long distance. A pressure regulator and an integrated pressure gauge help maintain the required levels in the storage chamber.

The barrel length is 110 cm, the bullet speed is 300 meters per second. To refill the container, you just need to insert the fitting into the appropriate port. The stock is equipped with an adjustable cheek piece and butt plate, the barrel is made of high-strength steel.

Advantages:

• long trunk;
• light weight;
• possibility of modification;
• accurate shooting;
• ease of maintenance.

Flaws:

small magazine capacity.

The Ataman Carbine rifle is designed to hit targets at long range - an excellent weapon for hunting.

Jaeger SPR

4.8

★★★★★ editorial assessment

93% of buyers recommend this product

The rifle received a pistol-type handle with special rifling that ensures reliable grip. The corrugated rubber butt pad ensures more comfortable aiming. The use of direct-flow air supply technology increases the initial firing power (projectile flight speed 300 m/s).

The barrel length is 47 cm, the semi-automatic magazine holds up to 10 bullets. The biathlon cocking lever is convenient for use by both right and left hands. The owner can adjust the force and stroke length of the hook.

Advantages:

• long trunk;
• volumetric tank;
• possibility of installing a sight;
• light weight.

Flaws:

lack of ammunition in the package.

The Jaeger SPR is worth purchasing for hunting and generally for targeted shooting from a long distance.

Kral Puncher Maxi 3

4.8

★★★★★ editorial assessment

88% of buyers recommend this product

The model is made of high-strength plastic. The ergonomic shape of the butt and stock ensures comfortable holding in the hands. Compression of air flows to prepare for operation can be carried out either manually or automatically. The rifle is capable of firing up to 60 times with a fully charged cylinder.

The bullet speed is 290 m/s, the weight of the weapon is 4.5 kg. A Picatinny rail is provided for mounting optics or tactical accessories. The use of a pistol-type handle allows you to reduce the load on your hands during use.

Advantages:

• ease of holding;
• possibility of modification;
• ease of maintenance;
• durable body.

Flaws:

a little heavy.

The Kral Puncher Maxi is suitable for recreational shooting or small game hunting.