Chainsaw driven winch

Winch attachment for a chainsaw - advantages and functions

Making your own towing mechanism from a chainsaw requires the use of certain tools.
However, not everyone has the necessary dexterity when working with a drill and welding machine. In this case, you can buy an attachment that is equipped with a household chainsaw. The winch attachment for a chainsaw is small in size and simple in design. It is easy to install by connecting the elements necessary to transmit torque to the engine. If necessary, the product can be removed. On average, this takes no more than 5 minutes.

Today, towing attachments are produced by many well-known manufacturers. These structures can be used for towing cars weighing up to 2.5 tons, as well as for clearing the local area and roadway from fallen trees or concrete damage.

The “Winch” attachment for a chainsaw is a simplified way to make a traction structure out of a chainsaw

Designing and assembling a winch from a chainsaw with your own hands, although it does not require global technical knowledge, does require a certain skill, which not everyone has. For most, an easier way is to purchase a ready-made set - a “Winch” attachment.

Additional devices - “Winch” attachments for chainsaws are produced for most modern chainsaws and differ in traction force, cable length and dimensions. With their help, you can easily move a fallen tree from the roadway, pull a car out of a ditch, moor it to the shore, or clear debris in case of an emergency.

Types of homemade winches

Any drawing will tell you how to assemble a useful device. A car winch remains a necessity, so don't give it up. First, you should get acquainted with the available options that guarantee ease of assembly. There are the following types of these devices:

Homemade winch - a simple device

In accordance with the schemes used, it will be possible to select the optimal winch. If desired, a person will independently make a suitable model that will meet his needs. This is why it is worth considering each type in detail, giving it a general description.

Manual

A homemade hand winch is an excellent choice that guarantees ease of operation. This is its main advantage, allowing you to freely use the device without facing the problem of a low battery. The only problem is that it requires a lot of effort.

The design of such an accessory becomes complex. Calculations must be made to obtain sufficient power. Otherwise, it will correspond only to the physical strength of a person. He will not be able to pull the SUV out of the ditch, so the installation will not give successful results.

A manual winch from the starter is the most affordable option that you can choose for your own car.

By using it, you will be able to quickly assemble a reliable structure that can cope with the task in any weather.

How to extend the life of a homemade mechanism?

The reliability of a homemade winch directly depends on the quality of its assembly. In addition, there are a number of other factors that affect the duration of the application of the mechanism.

These include:

well-coordinated clutch operation. To do this, the owner of a chainsaw winch must constantly monitor the condition of the main parts of the unit. If necessary, any worn part must be replaced;
ideal engine condition - operation of the mechanism is not allowed if the engine is not running well. This will not only lead to increased wear on the internal combustion engine, but will also increase the risk of damage to the object that needs to be pulled out. The engine must operate equally stably, both at idle and at high speeds;
reliability of fastening of safety elements. During intensive use of a homemade winch, you need to regularly check the condition of the anchor hooks, belts and other parts. If at least one of the spare parts is faulty, this will increase the risk of injury to the operator and loss of the towed object;
correct operation of the starter. If the trigger mechanism works intermittently, then this will turn the use of the winch into a real test for its owner;
reliability of the tow rope. Safety when working with the mechanism depends on its serviceability. If one of the cable strands breaks, it will need to be completely replaced;
proper quality of fuel and oil. In order for the engine to last for a long time, you need to use only high-quality branded oils and gasoline with an octane number not lower than that specified in the instructions to refuel it.

A winch driven by a chainsaw can last much longer than its full-fledged branded counterparts. However, to do this, you need to regularly check it and replace faulty parts immediately after detecting a breakdown.

Winch attachment for a chainsaw - functions, assembly algorithm

A winch is a mechanism that can bring a lot of benefits to any household. Today it can be purchased in the form of an attachment and used together with a chainsaw.

You can also make a homemade winch from a chainsaw. This homemade product is distinguished by its simple design, which makes it easier to maintain and repair.

At the same time, the pulling force of a homemade chainsaw winch is practically not inferior to full-fledged market models.

Winch attachment for a chainsaw - advantages and functions

The winch attachment for a chainsaw is small in size and simple in design. It is easy to install by connecting the elements necessary to transmit torque to the engine. If necessary, the product can be removed. On average, this takes no more than 5 minutes.

DIY chainsaw winch - assembly algorithm

If the owner of the saw still has experience working with tools, then nothing will stop you from making a winch from a chainsaw with your own hands. To do this, you will need to prepare the elements of the mechanism.

The list of required parts includes:

chainsaw - old Druzhba or Ural models will do. The main requirement for a saw is that its engine must have a power of at least 2.5 kW;
a drum on which the cable will be wound. You can make it, or take a finished product from an old manual mechanism;
gearbox – it is needed to reduce the torque of the chainsaw’s internal combustion engine;
round or square steel pipes - they are required for the manufacture of the supporting frame and anchor. The latter will make it possible to fix the device motionless on the surface;
multiple cam clamps;
lever arm;
fastening clamps.

It is important that there are no traces of rust on the metal parts. Otherwise, the homemade winch will quickly fail.

The winch for a chainsaw is assembled in the following order:

The frame is one of the most important parts of a homemade device. The reliability of the entire mechanism depends on its strength. Therefore, the parts for the frame must be solid and quite large. At the same time, spare parts for the supporting structure should not be heavy, so as not to burden the entire structure. Metal pipes are best suited for this purpose. They must be welded together in the shape of a square. Inside it you will need to weld several more pipes that will hold the engine;
Then you will need to install a motor at the rear of the frame, and a cable drum behind it. The motor can be bolted down so it can be removed. The base of the coil must be welded;
After this, you need to connect the drum and reduction gear to the motor. This must be done using a solid metal shaft. During operation, the motor will transmit revolutions through the gearbox to the used shaft, from which the rotational force of the internal combustion engine will be transmitted to the drum
To start the drum automatically, you will need to connect a lever to the shaft. Both parts will be connected using cam clamps. Thus, when the lever is moved to one position, the drum will turn on, and when installed in another, the element will stop. This will greatly simplify the use of a homemade mechanism;
To make an anchor, you will need pointed metal corners. When working, they will go deeper into the ground, or cling to a strong, stable object on a flat horizontal plane.

At the end, the chainsaw winch must be tested. There is no need to immediately check the mechanism when towing heavy objects. First you need to pull out a small object with it. At this time, you need to check the reliability of the device’s fasteners and the presence of extraneous noise when the engine is running from the saw. If everything works, then the homemade mechanism is completely ready for use.

How to extend the life of a homemade mechanism?

The reliability of a homemade winch directly depends on the quality of its assembly. In addition, there are a number of other factors that affect the duration of the application of the mechanism.

These include:

well-coordinated clutch operation. To do this, the owner of a chainsaw winch must constantly monitor the condition of the main parts of the unit. If necessary, any worn part must be replaced;
ideal engine condition - operation of the mechanism is not allowed if the engine is not running well. This will not only lead to increased wear on the internal combustion engine, but will also increase the risk of damage to the object that needs to be pulled out. The engine must operate equally stably, both at idle and at high speeds;
reliability of fastening of safety elements. During intensive use of a homemade winch, you need to regularly check the condition of the anchor hooks, belts and other parts. If at least one of the spare parts is faulty, this will increase the risk of injury to the operator and loss of the towed object;
correct operation of the starter. If the trigger mechanism works intermittently, then this will turn the use of the winch into a real test for its owner;
reliability of the tow rope. Safety when working with the mechanism depends on its serviceability. If one of the cable strands breaks, it will need to be completely replaced;
proper quality of fuel and oil. In order for the engine to last for a long time, you need to use only high-quality branded oils and gasoline with an octane number not lower than that specified in the instructions to refuel it.

Chainsaw winch - design, features, attachment

A winch is a stationary or portable equipment whose main function is to pull or tow large objects.

This device can be made from available materials, for example, from an old chainsaw.

In the future, the finished winch can be installed on a car or tractor in order, if necessary, to remove a stuck vehicle or tow another agricultural implement to the nearest workshop.

What are the advantages of homemade winch assembly?

A homemade chainsaw winch allows the manufacturer to save a significant amount of money.

In addition, assembling the necessary device with your own hands gives the designer several other advantages:

the ability to manufacture a winch with the dimensions needed for further unhindered installation and operation;
the ability to use during manufacturing those components that are at hand;
ease of regular maintenance;
ease of self-repair.

In addition, a winch driven by a chainsaw does not need to be constantly connected to an electrical power source. It does not need to be connected to a battery, which saves battery life. It is enough to fill the device with a small amount of fuel mixture prepared from high-quality gasoline and branded semi-synthetic motor oil.

DIY chainsaw winch

Having collected everything necessary for work, the manufacturer can begin directly assembling the winch.

To do this you will need:

Weld a strong frame that is highly resistant to vibration and shock. The base of the frame is a thick steel plate, to the back of which the internal combustion engine from the chainsaw will be attached, and to the middle - a drum with a cable wound around it. The gearbox, control mechanism and other auxiliary elements must be attached to the plate using bolted connections and ties;
Attach the motor and drum. If there is another chainsaw on the farm, then the power unit from the gas-powered tool used can be welded with a thick continuous seam. This will give the overall structure stability and increased endurance. It is also best to secure the drum by welding;
Connect the gearbox used to the motor. Mechanisms must be secured using clamps. The connection of the element itself must be done using a shaft - it will play the role of a link connecting the motor and the moving drum with the cable;
To be able to automatically start the drum, you need to connect the winch control lever to it. The lever must be connected to the shaft using cam clamps. Thus, when moving the lever to one side, the drum will begin to rotate, and when changing the position of the lever, it will stop and lock in the position required for towing;
To assemble the anchor, you can use pointed corners. With its edges, the element must firmly and motionlessly stick into a stationary object;
The anchor must be attached to the frame using hinges. A steel holder will be responsible for lifting the element in the winch device.

After assembling the device, it must be tested. The operator should first test the equipment with light weights. If, while dragging, the chainsaw winch does not make any extraneous sounds and confidently copes with the load, then you can proceed to checking the homemade product with a larger load.

Winch attachment for a chainsaw - installation and operation features

Some well-known brands produce ready-made accessories for their chainsaws, technologically manufactured in the form of small portable attachments. These manufacturers include Stihl, Husqvarna, Patriot, Champion and AL-KO.

The winch attachment for a chainsaw is easy to install and remove. To install the equipment, you will need to first dismantle the cutting parts of the chainsaw. In this case, the clutch elements of the tool must remain in place. Next, you need to install the winch on the shaft, first putting the standard gearbox on it, and then all the other elements of the attachment.

Despite its relatively small size, the branded winch for a chainsaw stands out for its fairly high traction characteristics. It is capable of short-term towing of vehicles weighing up to 1 ton, as well as gradual removal of a stuck object weighing 1.2–1.5 tons.

Ready-made attachments in the form of winches do not require regular maintenance or frequent repairs. All the operator needs is to monitor the condition and winding of the tow rope, and also check the level of fixation of the standard bolted connections of the equipment.

Using a chainsaw winch

The winch attachment on a chainsaw is used for lifting and moving construction materials, pulling out stuck equipment, and towing boats to land. It will become an indispensable assistant in emergency situations.

Peculiarities:

The pulling force of a chainsaw winch directly depends on the power of the unit involved. The denomination can reach from one and a half to two thousand kilograms. If you use an auxiliary unit, this figure will increase significantly.
In order for a winch driven by a chainsaw to correctly perform its functions, it will be necessary to equip the unit with additional elements, such as a pull-out block with an increase in traction force and the ability to change the direction trajectory, various anchors, brackets, hooks, and sling belts.

It is recommended to use the most powerful chainsaws to create a winch. This is necessary so that the clutch does not burn out and the engine does not overheat.

We make a winch from a chainsaw with our own hands

A winch is a unit that is used to move or vertically lift heavy structures using a flexible cable, rope or chain. The latter are connected to a drum, which can have several drive options.

The simplest of them is manual: it is more durable than the others, but it is not suitable for daily use and heavy loads: the operator will quickly get tired. Electric winches are reliable, structurally perfect and solve a much wider range of problems than manual ones. The only negative is the dependence on power supply, which is not always available in the field or on rough terrain. The most practical and trouble-free unit is a winch based on an internal combustion engine: it creates high power and works in any conditions, even in places where no one has gone before.

Chainsaw winch - design, features, attachment

A winch is a stationary or portable equipment whose main function is to pull or tow large objects.

This device can be made from available materials, for example, from an old chainsaw.

In the future, the finished winch can be installed on a car or tractor in order, if necessary, to remove a stuck vehicle or tow another agricultural implement to the nearest workshop.

What are the advantages of homemade winch assembly?

A homemade chainsaw winch allows the manufacturer to save a significant amount of money.

In addition, assembling the necessary device with your own hands gives the designer several other advantages:

the ability to manufacture a winch with the dimensions needed for further unhindered installation and operation;
the ability to use during manufacturing those components that are at hand;
ease of regular maintenance;
ease of self-repair.

DIY chainsaw winch

Having collected everything necessary for work, the manufacturer can begin directly assembling the winch.

To do this you will need:

Weld a strong frame that is highly resistant to vibration and shock. The base of the frame is a thick steel plate, to the back of which the internal combustion engine from the chainsaw will be attached, and to the middle - a drum with a cable wound around it. The gearbox, control mechanism and other auxiliary elements must be attached to the plate using bolted connections and ties;
Attach the motor and drum. If there is another chainsaw on the farm, then the power unit from the gas-powered tool used can be welded with a thick continuous seam. This will give the overall structure stability and increased endurance. It is also best to secure the drum by welding;
Connect the gearbox used to the motor. Mechanisms must be secured using clamps. The connection of the element itself must be done using a shaft - it will play the role of a link connecting the motor and the moving drum with the cable;
To be able to automatically start the drum, you need to connect the winch control lever to it. The lever must be connected to the shaft using cam clamps. Thus, when moving the lever to one side, the drum will begin to rotate, and when changing the position of the lever, it will stop and lock in the position required for towing;
To assemble the anchor, you can use pointed corners. With its edges, the element must firmly and motionlessly stick into a stationary object;
The anchor must be attached to the frame using hinges. A steel holder will be responsible for lifting the element in the winch device.

Making a winch from a chainsaw: where to start?

This question is asked by all those who take on such a responsible and, at first glance, difficult job for the first time. Let us reassure you, because everything is not as complicated as it appears at first.

To turn a chainsaw into a motorized winch, we will need:

chainsaw - you can take the domestic Ural or Druzhba, or turn to products of European origin. It is advisable not to take household models - with a thrust of less than 2.5 kW;
drum - we take a ready-made one from an old manual winch or make it ourselves;
gearbox – to reduce motor torque;
metal pipes or a square pipe - they will be used to create a supporting frame and an anchor: it will help to accurately fix the structure on the surface;
lever arm;
cam clamps;
clamps.

Stages of work:

Using available materials, we weld a rigid structure - a frame;
On it we assemble the engine from the chainsaw and the drum where the cable will be wound;
We attach the gearbox to the motor with clamps;
Through a metal shaft we aggregate the drum with a reduction gearbox. Thus, the engine speed passes through the gearbox to the shaft, and from it to the rotating drum;
So that the latter can start in auto mode, we connect a control lever, which is connected to the shaft with special cam clamps: this will allow the movement of the lever in one direction to turn on the drum, and in the other to stop, thereby controlling the work process;
we make the anchor from pointed corners: they will have to stick into the soil or catch on a stationary object on a plane;
we aggregate the anchor to the frame with hinges and weld a metal hold to lift it;
We are carrying out the first tests - our chainsaw winch is ready.

An example of the use of such a motorized winch is plowing a garden with a plow - it is dragged by a winch and can be easily controlled even by a woman, or transporting logs.

More complex designs are also possible: with a double gearbox, where the gear ratio will be 1:10. They are no less effective than the one described above and also contribute to the careful use of the constituent components.

How to make a winch from a chainsaw

For plowing, a chainsaw-driven winch has a number of advantages. The main advantage over a motorcycle engine is the speed of installation of the chainsaw. There is no need to design engine cooling, install a fuel tank, air filter, electrical equipment (switch), or wiring. Make a homemade exhaust system. Secure the muffler.

1 – chainsaw; 2 – gearbox; 3 – drum; 4 — drum control lever; 5 – frame; 6 – anchor.

Chainsaw attachment winch

The attachment or attachment is a reduction gear. If you remove the cover and look inside, you will see a whole series of different gears, small and large. With the help of which the number of drum revolutions changes depending on the number of revolutions of the engine crankshaft. In this regard, the load on the power unit is reduced. That's what we need in hard work.

The connection between the attachment and the chainsaw is made using a clamp and a stand. Due to this, the winch is compact and lightweight, easy to use during assembly and repair.

3 – drum; 4 — drum control lever; 5 – frame.

The torque, from the crankshaft, passing through the reduction gearbox, is transmitted to the shaft on which the drum with the cable is located. The drum has the ability to be connected and disconnected from the shaft. It occurs using a lever and special cams located both on the shaft and on the drum. We move it, use the lever towards the chainsaw to connect it, reverse it, and turn it off.

We selected material for the supporting frame of the entire homemade product. Old used water pipes and an unwanted metal bed. For ease of use, the frame is made in the form of a sleigh. During plowing, you do not need to lift the winch, you just need to move it.

It takes a lot of effort to cultivate the soil. Our homemade product turned out to be light, so it needs to be firmly secured to the soil to prevent spontaneous movement towards the plow. For this we installed a special anchor. Attached to the frame using a hinge. By pressing the anchor from above, special knives easily sink into the soil. Hold the homemade product firmly in one place. You can and should press with your foot, and pull it out with your hand using a special bracket.

8 — hinge; 9 — bracket; 10 - knives.

The control of a homemade winch is very simple. We only have two levers, one on the chainsaw and the other on the attachment. Plus anchoring and dragging towards an unplowed area. Even a woman can easily figure this out. BUT for all this to work you need:

perfect clutch operation;
trouble-free easy starting of the power unit;
stable engine operation at idle speed;
precise operation of the chainsaw starter.

Cons: Long-term operation of the power unit often becomes unstable. High fuel consumption compared to engines from light motorcycles Minsk or Voskhod.

Chainsaw winch - design features

The versatility of chainsaws makes it possible not only to perform a wide range of work, but also to replace many special devices.
In addition to cutting wood, clearing territory, caring for a garden and using it for repair and construction activities, the saw engine can become a drive for devices for various purposes. Attachments allow you to design a powerful winch driven by a chainsaw.

Making an angle grinder

An angle grinder is a multifunctional tool necessary for a number of jobs. Despite its availability and prevalence, craftsmen made an angle grinder from a chainsaw (a sample is shown in the photo below).

Assembling an angle grinder using a special device for a chainsaw goes like this:

remove the chain and bar from the gasoline saw;
install a pulley on the gearbox shaft;
instead of a tire, they mount a special attachment, also with a pulley, after putting a belt on it;
tension the belt drive like a chain;
attach the protective casing;
install the disc.

The entire process is shown in detail in the video below.

A self-assembled grinder-petrol cutter will help in performing many practical tasks. Its power is sufficient for productive work on concrete.

Are old chainsaws still needed today?

Probably, many people have old chainsaws of the “Friendship” type lying in their sheds and storage rooms. For a long time it was a pity to throw away the saw, but it came in handy for making a drill

This saw has a fairly powerful and, importantly, low-speed engine. There should be no difficulties with mounting such an engine.

We install the fuel supply control handle on the upper (smaller) frame. The soil is very uneven in its structure - layers of varying density and viscosity, stones, roots, etc. The drill can jump off, suddenly increase speed, or move to the side, so we strongly recommend placing an emergency engine shutdown system next to the fuel supply control mechanism.

old Druzhba chainsaw
Some old Soviet saws are quite large, which requires an increase in the size of the gas drill. Before starting work, consider whether it will be convenient to operate such a structure. Otherwise, the Druzhba, Ural and similar chainsaws are quite suitable for our task.

Moped with motor

All chainsaw crafts are distinguished by their practicality, but where would we be without it if the power unit is a real engine.

So, you can prepare a frame from a bicycle or a strong scooter.
The chain and saw bar must be removed from the chainsaw. Due to the fact that the engine housing will be preserved, installing it on the moped will not be difficult;
The centrifugal clutch must be unscrewed from the crankshaft. The bicycle chain and sprockets will transmit power from the engine. In order to start the moped, you need to lift the wheel. If you can find a chain that will go to the sprockets located on the coupling flange, the coupling can be saved. If the chainsaw motor is two-stroke, in addition to gasoline, you will need to add oil, and the centrifugal clutch must be left in place. Rolling down an inclined road without a clutch will cause the motor to burn out;
Firmly bolt the remaining stars to the moped axle located on the rear side;
leave the motor on the platform and make sure that the stars are located at the same level;
Fasten the motor to the platform with bolts in the drilled places;
Pull the chain tightly over the sprockets. If your bicycle chain is longer than necessary, remove a few links;
Attach the hand accelerator to the handle of the moped and connect its wire to the motor;

Happy chainsaw crafts to everyone and don’t get bored.

How to make a winch from a chainsaw

1 – chainsaw; 2 – gearbox; 3 – drum; 4 — drum control lever; 5 – frame; 6 – anchor.

Chainsaw attachment winch

The connection between the attachment and the chainsaw is made using a clamp and a stand. Due to this, the winch is compact and lightweight, easy to use during assembly and repair.

3 – drum; 4 — drum control lever; 5 – frame.

8 — hinge; 9 — bracket; 10 - knives.

perfect clutch operation;
trouble-free easy starting of the power unit;
stable engine operation at idle speed;
precise operation of the chainsaw starter.

Cons: Long-term operation of the power unit often becomes unstable. High fuel consumption compared to engines from light motorcycles Minsk or Voskhod.

Chainsaw winch - installation and manufacturing procedure

A winch is a household device designed for removing large objects from ravines and holes.
The winch will become an indispensable assistant in cases where you need to pull your car out of a quagmire or a deep stream. However, not everyone can afford to buy a high-quality winch.

In this case, you should think about making a unit from a household chainsaw.

Advantages of making a homemade winch

Assembling the device yourself has a number of advantages.

These include:

the ability to use any available means to assemble a homemade product;
simplicity of the device and ease of maintenance of the winch;
the ability to manufacture homemade products of almost any size and power;
low fuel consumption compared to store-bought analogues.

A chainsaw winch is practically in no way inferior to any market analogue. Moreover, if assembled correctly, it will be no less reliable and durable than store-bought equipment.

Preparing for self-assembly

Immediately before making a homemade device, you will need to study the drawings. The diagrams must indicate the mounting capabilities of all parts used, as well as their dimensions.

To work you also need to first prepare:

engine from a household chainsaw complete with fuel tank, carburetor and drive. The required petrol engine power is from 3 liters. With. and higher;
gearbox - this mechanism is necessary to reduce the generated torque that the engine generates;
drum - you can find it at the old equipment market. An element from an old winch or a homemade device made from sheets of forged steel will do;
cam clamps - required to fix the drum in a stationary state;
lever - needed to turn the engine on and off;
clamps - with their help the gearbox is connected to the internal combustion engine of the chain saw.

A winch driven by a chainsaw must be equipped with a reliable metal cable that can withstand significant tensile strength and abrasion.

Do-it-yourself chainsaw winch - manufacturing procedure

A homemade winch for a chainsaw must be assembled in a certain sequence.

The algorithm of work performed is as follows:

First you need to assemble the supporting metal frame. To make it, you can use almost any available means. The main thing is that the frame is assembled from parts that do not show signs of corrosion. It is best to fasten frame parts by welding, since bolted connections will lose their strength over time due to strong vibration;
Next, you will need to install a fully serviceable internal combustion engine from a household chainsaw on the finished homemade frame. In front of it it is necessary to attach the drum for the winch. It will be connected to the motor using the connected drive;
After this, you need to connect the gearbox to the motor. Clamps are used for this;
Then you will need to connect the drum to the reduction gearbox. Both elements are connected to each other using a solid metal shaft. During operation of the winch, the engine will transmit force to the gearbox, which will drive the shaft used. He, in turn, will spin the drum of the device;
To be able to start the drum in automatic mode, you will need to connect the unit control lever to it. It will be connected to the shaft being used using cam clamps. Thus, when the lever is moved to one specific direction, the drum will begin to rotate, and when the lever returns to its original position, the drum will stop. This will make controlling the operation of a homemade chainsaw device more convenient;
After this you will need to make an anchor. To assemble it, it is best to use pointed metal corners. During operation of the unit, the corners will stick into the ground and also cling to a tree or other stable object;
Then the finished anchor must be installed on the frame using hinges. To be able to lift the anchor, its metal holder will need to be welded to the support frame.

At the end, the finished chainsaw device will need to be tested. During testing, it is necessary to ensure that the unit does not make creaking sounds during operation, as this indicates a malfunction of the homemade mechanism.

Winch attachment for a chainsaw - installation procedure

If the owner of a chainsaw does not want to assemble the device himself, or he does not have the necessary skills for this, then he can buy a special device. It is a unit that includes a drum with a cable, a drive and a gearbox. The working mechanisms of the winch are placed in a shock-resistant housing that protects them from accidental falls.

The winch attachment for a chainsaw is easy to install and remove yourself. To install the device, a pipe is provided in its device, inside which a shaft is placed, which plays the role of a drive. To install the device, it is enough to remove the standard saw set of the chainsaw. After this, the shaft is connected to the motor. The winch body is secured by bolting.

When operating a chainsaw with an attachment, the motor creates torque and transmits it through a reduction gearbox to the drive shaft. He, in turn, begins to spin the drum with a metal cable. To stop the reel, the operator must turn the ignition switch to the "Off" position and turn off the engine of the garden tool being used.

The main advantage of the winch attachment is its small dimensions. At the same time, it is equipped with a fairly reliable cable that can withstand high tensile loads. Thanks to this, the device makes it possible to pull objects weighing up to 1–1.5 tons out of ravines or holes.

In addition, the nozzle has a fairly simple design. This makes it easier to independently maintain and repair.

Winch attachment for a chainsaw - installation procedure

In addition, the nozzle has a fairly simple design. This makes it easier to independently maintain and repair.

https://youtube.com/watch?v=tjnFNns9RYc

Winch attachment for a chainsaw - installation and operation features

Gas winch made from a chainsaw and gearbox

Hello everyone, in this instruction we will look at how to assemble a chainsaw-based winch with your own hands. Such a useful device can be used for various purposes, because it is mobile and runs on gasoline. The author uses it to drag logs from the ravine. This is very convenient and useful when preparing firewood, building materials and other things. Also, such a winch can easily be used as a lift, which will be convenient during construction work. For example, you need to lift several buckets of cement, this winch will easily cope with the task.

The author used a chainsaw as a motor. You will also need to obtain high torque for the winch. For these purposes, an old worm-type reduction gearbox from some equipment was used. All other materials are easy to find or make. So, let's look in more detail at how to make such a winch.

List of materials:

- chainsaw; — reduction gearbox; - bicycle spare parts; - Sheet steel; - corner; - steel pipe; - screws, nuts, etc.; — cable for control; - cable for winch.

List of tools:

- lathe; - drill; - Bulgarian; — welding; - screwdrivers, wrenches, hammer and so on.

The process of making a homemade winch:

Step one. Disassembling the chainsaw

Let's start by preparing the chainsaw. First of all, we need to remove the clutch and sprocket. To unscrew it, the engine needs to be fixed; for these purposes we need to remove the top cover and unscrew the spark plug. Insert a cord, a piece of leather or something similar into the spark plug hole. Now the engine will rest against the skin with the piston and will no longer turn. Using a special wrench, unscrew the clutch and remove the sprocket. An angle grinder wrench will do if the clutch is not tightened too tightly.

Step two. Drive sprocket installation

As a result, after installing the structure on the saw, we have a drive sprocket equipped with a clutch, which is very convenient.

Step three. Drive sprocket installation

The author fastens the pulley itself with three screws, two of them secure the pulley from turning in a circle, and another one is screwed in so that the pulley does not come off the gearbox shaft.

Step four.
Install the chainsaw on the gearbox Step five.
Protective shields Step six. Making a winch pulley

The winch pulley is needed so that the cable can be wound around it and the desired work can be done. To make it, we first take a piece of steel pipe of a suitable diameter so that it can be put on the gearbox shaft. Next, drill holes and cut threads for the screws. Using screws we will secure the pipe to the shaft; there is a groove there. The ends of the screws will need to be ground to the diameter of the groove.

Step seven. The basis

Also attach a cable to the winch, with which you can tie it to a tree, car, and so on. At the end of the cable, install a hook for quick attachment.

Step eight. Handle for control

Finally, paint the metal parts of the structure. When working in the forest, moisture will quickly cause the metal to rust.

Step nine. Tests

You can start testing the winch! We tie it to a tree, car or other reliable support. We tie one end of the cable to a log that needs to be pulled out of the ravine. Well, we wind the other end onto the winch and turn on the machine! Slowly adding speed, we ensure that the log begins to crawl towards you from the ravine. The author has made quite a few columns this way. In any case, it will be much easier than carrying them by hand, after which you get very tired and your muscles hurt. And to prevent a forester from catching you doing this, it would be useful to install a muffler on the chainsaw.

Source

Become the author of the site, publish your own articles, descriptions of homemade products and pay for the text. Read more here.

What determines the durability of homemade motorized winches?

The main factor that influences this is the build quality

Therefore, please pay attention to the following:

reliability of the clutch of motorcycle tools;
no problems with starting the motor part of the saw - slipping, unexplained shutdowns: the saw should run smoothly and hold idle and high speeds equally well;
trouble-free starter - otherwise a minute’s work will turn into many hours of agony;
the presence of safety systems, hooks, belts, which should help bring the structure to perfection.

Diagnose gasoline saws for malfunctions, and only then adapt them for homemade projects: this way you will ensure your safety and save time.

What is needed to make a winch?

Despite the simplicity of the initial design and ease of self-assembly, the winch designer will still need to prepare a certain list of parts and mechanisms. Their installation in the overall structure of the device will allow you to assemble equipment that will work as stably as possible and will not let the owner down at the most inopportune moment.

To assemble a winch based on a household chainsaw, the manufacturer will need:

a fully serviceable and ready-to-use gasoline saw - domestic models Druzhba and Ural, as well as high-quality brand saws Stihl, Husqvarna, Patriot and Al-Ko, are very popular among assemblers. The main requirement for the engine is that its power must be at least 3 liters. With.;
gearbox - this mechanism will connect to the power unit of the chainsaw and reduce the initial torque created by the internal combustion engine;
metal pipes, couplers, brackets, steel sheets - needed to assemble the support frame and winch body;
drum and reinforced metal cable;
steel hook;
cam metal clamps;
fastening clamps;
lever for controlling the winch.

It is best to pre-coat metal and steel components with a primer and several layers of paint. It will protect parts from the formation of pockets of corrosion and rotting caused by regular use of the device under conditions of constant exposure to moisture.

Chainsaw winch

A winch is a household device designed for removing large objects from ravines and holes. The winch will become an indispensable assistant in cases where you need to pull your car out of a quagmire or a deep stream. However, not everyone can afford to buy a high-quality winch. In this case, you should think about making a unit from a household chainsaw.

Advantages of making a homemade winch

Assembling the device yourself has a number of advantages.

These include:

the ability to use any available means to assemble a homemade product;
simplicity of the device and ease of maintenance of the winch;
the ability to manufacture homemade products of almost any size and power;
low fuel consumption compared to store-bought analogues.

A chainsaw winch is practically in no way inferior to any market analogue. Moreover, if assembled correctly, it will be no less reliable and durable than store-bought equipment.

Preparing for self-assembly

Immediately before making a homemade device, you will need to study the drawings. The diagrams must indicate the mounting capabilities of all parts used, as well as their dimensions.

To work you also need to first prepare:

engine from a household chainsaw complete with fuel tank, carburetor and drive. The required petrol engine power is from 3 liters. With. and higher;
gearbox - this mechanism is necessary to reduce the generated torque that the engine generates;
drum - you can find it at the old equipment market. An element from an old winch or a homemade device made from sheets of forged steel will do;
cam clamps - required to fix the drum in a stationary state;
lever - needed to turn the engine on and off;
clamps - with their help the gearbox is connected to the internal combustion engine of the chain saw.

A winch driven by a chainsaw must be equipped with a reliable metal cable that can withstand significant tensile strength and abrasion.

Do-it-yourself chainsaw winch - manufacturing procedure

A homemade winch for a chainsaw must be assembled in a certain sequence.

The algorithm of work performed is as follows:

First you need to assemble the supporting metal frame. To make it, you can use almost any available means. The main thing is that the frame is assembled from parts that do not show signs of corrosion. It is best to fasten frame parts by welding, since bolted connections will lose their strength over time due to strong vibration;
Next, you will need to install a fully serviceable internal combustion engine from a household chainsaw on the finished homemade frame. In front of it it is necessary to attach the drum for the winch. It will be connected to the motor using the connected drive;
After this, you need to connect the gearbox to the motor. Clamps are used for this;
Then you will need to connect the drum to the reduction gearbox. Both elements are connected to each other using a solid metal shaft. During operation of the winch, the engine will transmit force to the gearbox, which will drive the shaft used. He, in turn, will spin the drum of the device;
To be able to start the drum in automatic mode, you will need to connect the unit control lever to it. It will be connected to the shaft being used using cam clamps. Thus, when the lever is moved to one specific direction, the drum will begin to rotate, and when the lever returns to its original position, the drum will stop. This will make controlling the operation of a homemade chainsaw device more convenient;
After this you will need to make an anchor. To assemble it, it is best to use pointed metal corners. During operation of the unit, the corners will stick into the ground and also cling to a tree or other stable object;
Then the finished anchor must be installed on the frame using hinges. To be able to lift the anchor, its metal holder will need to be welded to the support frame.