GOST 5927-70 hex nut M6, M8, M10, M12, M16, M20, M24, M27, M30 and others

HEX NUTS ACCURACY CLASS B

Design and dimensions

Hexagon nuts, product grade B. Construction and dimensions

MKS 21.060.20 OKP 12 8300

1. DEVELOPED AND INTRODUCED by the USSR Ministry of Ferrous Metallurgy

2. APPROVED AND ENTERED INTO EFFECT by Resolution of the Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR dated 02.18.70 N 178

3. The standard fully complies with ST SEV 3683-82

5. REFERENCE REGULATIVE AND TECHNICAL DOCUMENTS

Designation of the referenced technical document

6. The validity period was lifted according to Protocol N 5-94 of the Interstate Council for Standardization, Metrology and Certification (IUS 11-12-94)

7. EDITION (February 2010) with Amendments No. 2, 3, 4, 5, 6, 7, approved in February 1974, March 1981, June 1983, May 1985, March 1989. , July 1995 (IUS 3-74, 6-81, 11-83, 8-85, 6-89, 9-95)

1. This standard applies to hex nuts of accuracy class B with thread diameters from 1.6 to 48 mm.

(Changed edition, Amendment No. 4).

2. The design and dimensions of the nuts must correspond to those indicated in the drawing and table.

(Changed edition, Amendment No. 2-7).

3. Thread - according to GOST 24705.

(Changed edition, Amendment No. 2, 4).

3a. Tolerances of dimensions, deviations in shape and location of surfaces and control methods not established by this standard are in accordance with GOST 1759.1*. ________________ * The document is not valid on the territory of the Russian Federation. GOST R ISO 4759-1-2009 is valid, hereinafter in the text. — Note from the database manufacturer.

3b. Allowable defects of nut surfaces and control methods are in accordance with GOST 1759.3*. ________________ * The document is not valid on the territory of the Russian Federation. GOST R ISO 6157-2-2009 is valid. — Note from the database manufacturer.

3a, 3b. (Introduced additionally, Amendment No. 5).

4. (Deleted, Amendment No. 5).

5. Technical requirements - according to GOST 1759.0*. _________________ * On the territory of the Russian Federation, in terms of marking, GOST R 52627-2006, GOST R 52628-2006 apply.

6. (Deleted, Amendment No. 2).

7. The weight of the nuts is indicated in Appendix 1.

Catalog / nut GOST 5915-70 high-strength hexagon

Hex nut GOST 5915

GOST 5915-70 hex nut - used in mechanical engineering and construction as connection parts.

Nut GOST 5915 analogue of DIN 934, ISO.

It is possible to supply nuts in accordance with GOST 5915-70 with fine thread pitches and in a high-strength version (strength classes 8.0 and 10.0) made of 20G2R steel.

Nut size range: M6 nut, M8 nut, M10 nut, M12 nut, M16 nut, M20 nut, M24 nut, M27 nut, M30 nut, M36 nut, M42 nut, M48 nut, M52 nut.

GOST 5915-70 hex nut. Nut weight DIN 934

NTD
Size rangeM4-M30
Accuracy classB A
Thread tolerance field6h 7h
Strength class6 8 10
steel grade10kp 20kp

Nuts according to this GOST made of steels 35, 40Х, 09G2S sizes from M4 to M42, nuts with zinc coating are made to order.


Nut price 2015. Nut GOST 5915-70 hexagonal produced by Severstal hardware OSPAZ

Diameter, dNut M4Nut M5Nut M6Nut M8Nut M10Nut M12
S7810131719
e,no less7,58,610,914,218,720,9
m3,2456,5810
thread pitch0,70,811,251,51,75

Specifications. GOST 5915-70 hex nut.

dNut M16Nut M20Nut M22Nut M24Nut M27Nut M30
S243032364146
e,no less26,2333539,645,250,9
m131618192224
thread pitch22,52,5333,5
  • with strength classes 6.0, 8.0, 10.0 * from steels 20, 35, 20G2R;
  • galvanized zinc coated

Example of a symbol:

Nut with thread diameter d 12 mm, with a large thread pitch, with a thread tolerance of 6H, strength class 5, uncoated:

Nut M12-6N.5 GOST 5915-70

Hexagonal nut with thread diameter d 16 mm, with a large thread pitch with a tolerance range of 6H, strength class 6, made of A12 steel, uncoated:

Nut 2M16-6N.6.A GOST 5915-70

Nut with a thread diameter of d 20 mm, with a large thread pitch with a tolerance range of 6H, strength class 6, made of steel grade A12, uncoated:

Nut GOST 5915-70 hexagonal DIN 934

Catalog / nut GOST 5915-70 high-strength hexagon

GOST 5915-70 hex nut - used in mechanical engineering and construction as connection parts.
Nut GOST 5915 analogue of DIN 934, ISO.

It is possible to supply nuts in accordance with GOST 5915-70 with fine thread pitches and in a high-strength version (strength classes 8.0 and 10.0) made of 20G2R steel.

Nut size range: M6 nut, M8 nut, M10 nut, M12 nut, M16 nut, M20 nut, M24 nut, M27 nut, M30 nut, M36 nut, M42 nut, M48 nut, M52 nut.
GOST 5915-70 hex nut. Nut weight DIN 934

NTDGOST 5915-70 DIN 555
Size rangeM4-M30
Accuracy classB A
Thread tolerance field6h 7h
Strength class6 8 10
steel grade10kp 20kp

Nuts according to this GOST made of steels 35, 40Х, 09G2S sizes from M4 to M42, nuts with zinc coating are made to order.

Nut price 2015. Nut GOST 5915-70 hexagonal produced by Severstal hardware OSPAZ

Diameter, dNut M4Nut M5Nut M6Nut M8Nut M10Nut M12
S7810131719
e,no less7,58,610,914,218,720,9
m3,2456,5810
thread pitch0,70,811,251,51,75

Specifications. GOST 5915-70 hex nut.

dNut M16Nut M20Nut M22Nut M24Nut M27Nut M30
S243032364146
e,no less26,2333539,645,250,9
m131618192224
thread pitch22,52,5333,5

Can be supplied:

  • with strength classes 6.0, 8.0, 10.0* from steels 20, 35, 20G2R;
  • galvanized zinc coated

Example of a symbol:

Nut with thread diameter d 12 mm, with a large thread pitch, with a thread tolerance of 6H, strength class 5, uncoated:

Nut M12-6N.5 GOST 5915-70

Hexagonal nut with thread diameter d 16 mm, with a large thread pitch with a tolerance range of 6H, strength class 6, made of A12 steel, uncoated:

Nut 2M16-6N.6.A GOST 5915-70

Nut with a thread diameter of d 20 mm, with a large thread pitch with a tolerance range of 6H, strength class 6, made of steel grade A12, uncoated:

Nut 2M20-6N.6.A GOST 5915-70

Nut with a thread diameter of d 36 mm with a fine thread pitch with a tolerance range of 6H, strength class 10.9, made of steel grade 40X, with a coating of 01 with a thickness of 9 microns:

Nut 2М36X1.5-6Н.10.9 40X019 GOST 5915-70
Theoretical weight 1000 pieces, kg. Nut weight GOST 5915-70.

Diameter, mmTheoretical weight of 1000 pieces, kg
62.441
85.130
1011.370
1215.400
1428.480
1633.17
1847.03
2062.60
2276.77
24107.0
27161.40

GOST 5915 is a domestic analogue of the GOST ISO 4032-2014 nut. ISO 4032-2014 defines the main characteristics for a hexagonal normal nut (type 1), with threads from M1.6 to M64 inclusive, accuracy class A for DM16 threads.

How to buy a high-strength hex nut GOST 5915-70 M8, M12, M10, M16, M24 at low prices:

  • fill out the simple “Place an order” form at the top of the page;
  • call on the phone +7;
  • send your application by email;

Delivery within the Russian Federation: Moscow, St. Petersburg, Arkhangelsk, Astrakhan, Barnaul, Belgorod, Bryansk, Vladimir, Volgograd, Vologda, Voronezh, Yekaterinburg, Ivanovo, Izhevsk, Yoshkar-Ola, Kazan, Kaluga, Kirov, Kostroma, Krasnodar, Kurgan, Kursk, Lipetsk, Omsk, Orenburg, Penza, Perm, Pskov, Rostov-on-Don, Ryazan, Samara, Saransk, Saratov, Sevastopol, Simferopol, Smolensk, Stavropol, Tambov, Tver, Tomsk, Tula, Tyumen, Ulyanovsk, Ufa, Chelyabinsk, Yaroslavl, etc.

The information presented on this website contains a catalog of reference information on more than 3,000 types of metal products, is for informational purposes only, and can be used in various areas of enterprise activity.

Steel wire Welding electrodes Steel rope FastenersMetal mesh Hex bolts Nut GOST, DIN Steel rivetsAdjustable cotter pins GOST, DIN washers Threaded rods Calibrated rolled productsSlings, rigging Construction nails Steel cable Screws GOST, DIN

GOST 5927-70 hex nut M6, M8, M10, M12, M16, M20, M24, M27, M30 and others

Catalog / hex nut GOST 5927-70 M16, M20, M24, M27, M30, M36, M42, M48

Nut GOST 5927-70 with metric thread of accuracy class A - used in mechanical engineering and construction as connection parts.
It is possible to supply nuts in accordance with GOST 5927-70 with fine thread pitches and in a high-strength design (strength classes 8.0 and 10.0) made of 20G2R steel.

Analog of nut GOST 5927-70: DIN 934, EN ISO 4032, 4033.

Nut size range: nut M6, M8, M10, M12, M16, M20, M24, M27, M30, M36, M42, M48, M52.
GOST 5927-70 hex nut. Dimensions, weight

NTDNut GOST 5927-70 DIN 934
Size rangeM4-M30
Accuracy classB A
Thread tolerance field6h 7h
Strength class6 8 10
steel grade10kp 20kp

Nuts according to this GOST made of steels 35, 40Х, 09G2S sizes from M4 to M42, nuts with zinc coating are made to order.

Nut price 2022. Nut GOST 5927-70 hexagonal produced by Severstal.

Diameter, d mmM6M8M10M12M14
S101317;1619;1822;21
e,no less11,114,418,9;17,820,9;19,924,5;23,4
m56,581011
thread pitch11,251,5;1,251,75;1,252;1,5

Specifications. Hex nut GOST 5927-70 produced by OSPAZ

Diameter, d mmM16M18M20M22M24M27
S24273032;343641
e,no less26,830,133,535,7;37,74045,6
m131516171922
thread pitch2;1,52,5;1,52,5;1,52,5;1,53;23;2

Can be supplied:

  • with strength classes 6.0, 8.0, 10.0* from steels 20, 35, 20G2R;
  • galvanized zinc coated

An example of a nut symbol GOST 5927-70

Hexagonal nut with thread diameter d 12 mm, with a large thread pitch, with a thread tolerance of 6H, strength class 5, uncoated:

Nut M12-6N.5 GOST 5927-70

Hexagonal nut with a thread diameter of d 20 mm, with a large thread pitch with a tolerance range of 6H, strength class 6, made of steel grade A12, uncoated:

Nut 2M20-6N.6.A GOST 5927-70

Hexagonal nut with a thread diameter of d 24 mm, with a fine thread pitch with a tolerance range of 6H, strength class 12, made of steel grade 40X, with a coating of 01 with a thickness of 6 microns:

Nut 2М24X1.25-6Н.12.40X016 GOST 5927-70

Hexagonal nut with a thread diameter of d 30 mm, with a fine thread pitch with a tolerance range of 6H, strength class 10.9, made of steel grade 40X, with a coating of 01 9 microns thick:

Nut 2M30X1.5-6N.10.9 40X016 GOST 5927-70
Theoretical weight of 1000 pieces, kg

Diameter, mmTheoretical mass (weight) of 1000 pieces of nuts, kg. Weight, 1 kg
62.573
85.548
1010.220
1215.670
1425.33
1637.61
1852.27
2071.44
22103.15
24122.87
27175.28

GOST 5927 is a domestic analogue of the GOST ISO 4032-2014 nut. ISO 4032-2014 defines the main characteristics for a hexagonal normal nut (type 1), with threads from M1.6 to M64 inclusive, accuracy class A for DM16 threads.

How to buy a GOST 5927-70 hex nut M6, M8, M10, M12 at low prices:

  • fill out the simple “Place an order” form at the top of the page;
  • call on the phone +7;
  • send your application by email;

Delivery within the Russian Federation: Moscow, St. Petersburg, Arkhangelsk, Astrakhan, Barnaul, Belgorod, Bryansk, Vladimir, Volgograd, Vologda, Voronezh, Yekaterinburg, Ivanovo, Izhevsk, Yoshkar-Ola, Kazan, Kaluga, Kirov, Kostroma, Krasnodar, Kurgan, Kursk, Lipetsk, Omsk, Orenburg, Penza, Perm, Pskov, Rostov-on-Don, Ryazan, Samara, Saransk, Saratov, Sevastopol, Simferopol, Smolensk, Stavropol, Tambov, Tver, Tomsk, Tula, Tyumen, Ulyanovsk, Ufa, Chelyabinsk, Yaroslavl, etc.

The information presented on this website contains a catalog of reference information on more than 3,000 types of metal products, is for informational purposes only, and can be used in various areas of enterprise activity.

Steel wire Welding electrodes Steel rope FastenersMetal mesh Hex bolts Nut GOST, DIN Steel rivetsAdjustable cotter pins GOST, DIN washers Threaded rods Calibrated rolled productsSlings, rigging Construction nails Steel cable Screws GOST, DIN

GOST 5916-70 Low hex nut

Home»Nuts DIN, GOST»Nuts GOST» GOST 5916-70 Low hex nuts, sizes from M1 to M48

GOST 5916-70 Low hex nuts

accuracy class B with thread sizes from M1 to M48 mm. The thread complies with GOST 24705. GOST 5916-70 nuts are used for connecting and fastening parts and structures together with bolts and washers of the corresponding diameters.

Nut materials:

  • Steel: 5, 6, 8, 10, 12 (strength class for nuts)
  • Stainless steel: A1-A5, A2/A4-70, A2/A4-80
  • Non-ferrous metals, alloys: brass, aluminum.

Coatings:

  • Coated steel: galvanic galvanizing, thermal diffusion galvanizing, galvanic nickel plating, chrome plating, blued plating

Table of sizes and characteristics of hexagonal low nuts GOST 5916-70 from M1 to M10

dM1*M1.4*M1.6M2M2.5M3M3.5*M4M5M6M8M10
Plarge0,250,300,350,400,450,50,60,70,811,251,5
small11,25
d
a
no less1,01,41,622,53,03,54,05,06,08,010
no more1,151,611,842,302,93,454,004,605,756,758,7510,8
m0,81,01,21,61,82,02,22,73,24,05,0
e3,34,25,35,96,47,58,610,914,217,6
d
w
2,93,64,55,05,46,37,2911,714,6
S3,2455,5678101316
N0,0370,0380,0570,0740,1630,2180,2760,4310,6561,2542,6675,020

Table of sizes and characteristics of hexagonal low nuts GOST 5916-70 from M12 to M48

dM12M14*M16M18*M20M22*M24M27*M30M36M42M48
Plarge1,75222,52,52,5333,544,55
small1,251,51,51,51,51,5222333
d
a
no less121416182022242730364248
no more1315,117,319,421,623,825,929,232,438,945,451,8
m6,07,08,09,010,011,012,013,515,018,021,024,0
e19,922,826,229,633,037,339,645,250,960,871,382,6
d
w
16,519,222,024,827,731,433,238,042,751,159,969,4
S182124273034364146556575
N6,84011,6717,6825,9835,5350,0159,7988,06127,15216,99360,63558,12

According to GOST 5916-70 it is allowed to produce nuts with changed dimensions

dM10M12M14M22
Plarge1,51,7522,5
small1,251,251,51,5
d
a
no less10121422
no more10,81315,123,8
m8,410,812,819,8
e18,720,923,935,0
d
w
15,517,220,129,5
S17192232
N6,1108,30413,6640,43

* Nut sizes are not recommended.

Designations: d - nominal thread diameter, mm P - thread pitch, mm da - internal diameter, mm m - nut height (h14 for d ≤ 12; h15 for M12 < d ≤ M18; h16 for d > M18), mm e - circumscribed circle diameter, no less, mm dw — outer diameter, no less, mm S — spanner size, mm N — weight 1000 pcs. steel nuts (version 1) with coarse thread pitch, kg

To calculate the weight of brass nuts, multiply the values ​​from the table by 1.080; for aluminum alloy - by 0.356.

Analogues of GOST 5916-70:

DIN 439 - low hexagonal nut with a chamfer, accuracy classes A and B. DIN 936 - low hexagonal nut with a chamfer, accuracy classes A and B. ISO 4035 - low hexagonal nuts with a chamfer, accuracy classes A and B. ISO 4036 - hexagonal nuts low without chamfer, accuracy class B. ISO 8675 - low hex nuts with chamfer with metric fine threads, accuracy classes A and B.

You can order and buy hexagonal low nuts GOST 5916-70 at wholesale prices in St. Petersburg.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]