After 1.5 years of use, 2 metal legs fell off the glass kitchen table. We tried gluing it with Moment for glass. They fell off again after a month. Please advise what to glue it on so that it stays firmly in place?
Well, in general, such things are glued with a special UV glue designed specifically for glass. In addition to the glue itself, you also need a UV lamp. You can glue it at home without any problems. At one time I myself glued fusing onto glass sheets for interior doors, when I was working on glass, I glued it, one might say, “on my knees,” and it turned out very well. The glue itself is basically inexpensive, and you can make the lamp yourself if finances don’t allow it.
The metal legs of the glass table have come unglued. How can I fix them myself? What is needed for this?
To glue glass products, you must use special adhesives, for example, “Super Moment Glass”. This glue is ideal for gluing glass and crystal products to metal.
Clean the surfaces to be glued from dirt and dust, make sure that they fit tightly to each other. Apply glue evenly to one of the surfaces and immediately press the surfaces tightly together for 5-60 seconds.
The need for gluing glass and metal arises during the repair of a car, furniture or household appliances. Sometimes you need to firmly attach a mirror or repair the glass door in the oven. Until recently, such an operation seemed impossible. Nowadays there are many household chemical products on sale for joining metal and glass. Choose the most suitable one and use it correctly. Then the connection will be strong and durable.
What is the best way to glue glass and rubber?
Single-component high strength adhesive. Glues plastic, glass, rubber (including porous rubber) in any combination. That is, rubber-rubber, metal-rubber, rubber-glass, etc. T.
Interesting materials:
How to calculate the percentage of an amount in Excel? How to calculate the discount percentage online? How to count a segment of a circle? How to calculate the average score for a diploma in the Republic of Belarus? How to calculate average income in Excel? How to visit Starlight Boulevard? How to view activity in a telegram? How to view a transaction receipt in Sberbank online? How to view the Instagram blacklist on a computer? How to watch DLC in Epic Games?
How to glue correctly
It turns out that you can glue it incorrectly. Only at first glance does this procedure seem so primitive. In addition to the recommendations indicated on the packaging of the adhesive composition, it is important to take into account the fact where the glued object will subsequently be used.
Despite the fact that a glass tabletop looks stylish and elegant even without the use of additional decor, it can be made even more interesting and attractive in appearance.
Among the general recommendations, it is worth noting the following:
- Never skip the point about degreasing surfaces. Often, the strength of the bond depends on the quality of the pre-treatment. After all, in this way all dirt and fatty layers that interfere with the strong adhesion of the two surfaces are removed.
- Paint, varnish and other coatings must also be removed from surfaces, since they significantly reduce the degree of adhesion.
- Warm up the glass surface before gluing. The optimal temperature is 30 degrees Celsius above zero. To achieve this figure, you will need a hair dryer. Important: remember that if there is a sharp change in temperature, the glass surface may crack, so heat gradually and with great care, fully controlling the process.
- To make the glue dry faster, use a press. The main thing is that the load is uniform, otherwise the glass will crack.
A glass tabletop is usually attached to one material, such as metal pipes.
Cyanoacrylate
The main advantages of this adhesive are its water resistance and minimal drying time.
Cyanoacrylate has many benefits.
The algorithm of actions is as follows:
- Surfaces are properly prepared. As already mentioned, you should not save time at this stage. Carry out degreasing as required by the instructions.
- The two components are mixed until a homogeneous mass is obtained. And remember, the mixture retains its plastic state for only a few minutes, then it hardens, and you will no longer be able to glue anything with it.
- The mixture is applied to the prepared surfaces and they are glued together.
- The tighter the connection you provide at the time of gluing, the more reliable the result will be.
The reliability of the result will depend on the quality of the materials.
Sealant
Sealant can also be used as an adhesive. Usually, thanks to the sealant, a high degree of joint insulation is achieved. And therefore, sealant as an adhesive is used in situations where it is required to provide not high strength, but water resistance.
Silicone sealant joints are very durable.
The algorithm of actions is almost the same as in the case of glue. The only caveat: it takes longer to dry. In addition, the strength of the connection is not as strong as after using special adhesives.
Sealant is often used for gluing furniture.
Moment crystal
Another composition that is universally popular. The moment forms a soft layer that allows you to withstand even slight displacement of the bonded surfaces. But after drying it regains its shape.
To avoid having to scrub off superglue, be as careful as possible when using it.
How to use Moment Crystal:
- Prepare the surfaces well, remove any remaining adhesive and paint. Heat the glass and metal, this will provide a more reliable connection.
- The adhesive is available in liquid or paste form. In any case, for more effective adhesion, you need to thoroughly level the adhesive over the surface.
- To enhance the effect, a high load should be placed on the surfaces to be glued, but remember, it must be uniform, otherwise the glass may burst.
- The amount of time required for drying is usually indicated in the instructions, but to be 100% sure, it is recommended to allow more time.
Glue very often does not end up where it was originally planned.
Automotive glue
Transparent car glue is available on sale. Thanks to it, you can also obtain a strong connection between surfaces made of different materials.
Automotive glue will help glue the legs to the tabletop.
The work order is as follows:
- Surfaces are prepared. All foreign substances and coatings are removed. Try to achieve maximum smoothness of the glued planes.
- For degreasing, products that do not leave a film are used.
- It is checked how tightly the surfaces are connected to each other.
- Using a construction hair dryer, the surfaces are heated to 30 degrees Celsius (not higher). Remember that both glass and metal surfaces heat up.
- The parts are arranged so that the seam is as horizontal as possible.
- While the surface is warm, the adhesive is applied and distributed evenly. If there is any excess that comes out, it should be removed immediately, as this will be difficult to do once it has hardened.
The most popular on the market are adhesives from English, Italian and German brands:
Automotive glue is offered today in a sufficient range. However, professionals recommend giving preference to products from well-known brands that have earned a serious reputation. Otherwise, you are not immune from unpleasant surprises.
Ultraviolet lamp
An ultraviolet lamp is another way to connect surfaces of different materials. It's quite simple to work with.
A UV lamp will help in gluing the table.
It is useful when, in order to attach a metal part to a glass base, you use special adhesives such as VERIFIX MV 750 or B 682-0.
UV adhesives from these manufacturers bond glass to metal and other materials.
To get a decent result, take into account the following recommendations:
- Before work, clean the surface, get rid of any small debris, as well as paint residues. Degrease the surfaces, but under no circumstances use gasoline or kerosene for this, as they leave a film behind. Special liquid degreasers are sold for glass.
- Warm up the surfaces with a construction hairdryer, and thanks to this, you will increase the level of adhesion. In this case, you need to heat it to 60 degrees.
- Apply a thin layer of glue, spread evenly over the surface and connect the parts.
- Now the ultraviolet lamp treatment begins. The surface to be bonded must be irradiated twice. After the first treatment, the strength of the connection reaches approximately 70%, and after the second we can safely talk about 100% conjugation. Remember that the duration of irradiation depends on the power of the device. And the first stage of irradiation is usually much longer than the second.
Obviously, today there are enough means available with which you can glue a glass tabletop to metal. They differ in price and method of application, but in general, most adhesives guarantee a decent result.
Carry out all work carefully.
Video material
A table is a key element of the interior, and it doesn’t matter whether it’s a dining table or a coffee table. Tables with glass tops look especially interesting, because the interior takes on a completely new look when such an element appears in it. From this article, you learned how to attach glass to a tabletop without glue, so that its remains do not spoil the final impression.
ATTENTION TO THOSE WHO WANT TO REGISTER ON THE FORUM. Problem activating your account? Write to (ignel(gav)mail.ru, ICQ 50389649), indicating your nickname and the address from which you registered. Don't forget to look at the forum rules. Ignorance of the rules does not exempt you from responsibility! Don't forget to look at the TB Section. Knowing the rules can save lives. Have questions about using the forum? Look for answers in the FAQ (FAQ). There's a lot of useful stuff there. Looking for interesting materials? Guide to master classes from our forum members
- Artisan »
- Our works »
- We make it ourselves (Moderator: AndyAB) »
- Topic: How to attach a glass tabletop to legs?
Author Topic: How to attach a glass tabletop to legs? (Read 89243 times)
0 Users and 1 Guest are viewing this topic.
What substance should I use?
First of all, you need to decide which substance to use to connect the two materials. How to glue metal to glass - such a question is considered solely taking into account the characteristics of the selected adhesive. They may be as follows:
- Two-component epoxy adhesive. It is characterized by high insulating properties, very high strength, and electrical conductivity. In most cases, its consistency is transparent, consists of two components, for use it is enough to mix them together. Today, such adhesives are very widespread, as they are easy to use and allow you to achieve very high results.
- Silicone with high thermal stability. It is often used to glue glass to oven metal. The main properties are indicated by the manufacturer in the operating instructions; as a rule, the layer after hardening is not afraid of fats, oils and exposure to high temperatures. In addition, among the main properties there is resistance to low temperatures; the glued object remains intact even when the indicator drops to -60 °C.
- A product called Moment Crystal. When using it, the gluing procedure is significantly simplified, the interlayer is elastic and resistant to a wide variety of influences. After the deforming load has disappeared, the layer returns to its original position after some time. This type of glue is often considered when searching for an answer to the question of how to glue glass and metal, especially when working with parts that may be subject to vibration loads.
- Automotive adhesive resembles rubber in its basic characteristics. It is ideal for gluing metal and glass. It is worth considering that when decorating it is chosen extremely rarely, as it is black in color.
Heat-resistant sealant for oven glass
Gluing a metal surface to a glass surface or vice versa should be done only taking into account the manufacturer’s basic recommendations.
As a rule, instructions for use are located on the back of the package.
Fixing a crack on a glass table
Hello guests and regular readers. After repairing my mouse, I can finally write a post about repairing the table.
The situation is that I bought a coffee table and carefully took it home. Everything was intact. But when I started assembling it, I forgot that this is glass, and you can’t tighten the nuts “as much as you can.” In short, the crack went about 3 centimeters from the edge. Well, I think I'll loosen the nut so that the crack doesn't go any further. As soon as I let go of it a little, it opened another 20 cm. It was just terrible. No one has yet seen or had time to admire how spoiled everything is
