What is the best gasoline for a blowtorch?

Welding lamps, unlike soldering irons, are not designed for delicate work with instruments and electronics. These are powerful, energy-independent devices: heating is created by burning liquid fuel or gas. Since the heating temperature in many models exceeds 1000°C, the blowtorch can melt materials with greater hardness.

Before purchasing, you need to know exactly for what purpose the equipment is being purchased. There are many offers in stores: gasoline, gas. Gasoline gives a higher temperature, but wears out quickly, so liquid fuel burners are equipped with capacious and rather heavy fuel cylinders. Hydroxides are much lighter.

If you need a budget option, you can take a closer look at national brands. Many of them are not inferior to imported brands. For example, cheap but good Zubr gasoline is quite suitable for “amateur” work. If you have a lot of work to do and require the power and additional functionality of a blowtorch, it is better to choose a more powerful device, such as the Dremel Versaflame, which runs on gas. It will cost several times more, but the money spent will be completely worth it.

SIBIN 40670

Rating (2021): 3.75 Compact and lightweight

The gasoline device is characterized by a simple design due to its small dimensions, light weight, and is convenient for transportation and use in domestic conditions.

• Characteristics
• Average price: 950 rub.
• Country Russia
• Tank volume: 1.5 l
• Maximum operating temperature: 1100 degrees
• Extruder metal: steel
• Repair kit: yes

Despite its ergonomic shape and more modest dimensions compared to many analogues, the soldering iron has quite serious performance qualities. Heating after ignition occurs very quickly, which allows the use of a special position of the supply pipe. The steel ejector in combination with the protective casing provides a constant supply of flame, the level of which can be adjusted using a special valve. Gasoline is consumed sparingly, so a completely full tank lasts a long time. After finishing the device, users recommend cleaning the nozzle using the included needle. Disadvantages include the inconvenient shape of the tank for refilling fuel and the insufficiently shiny seam on the bottom of the tank.

Advantages and disadvantages

• Design dimensions 22.5x26x13 cm, weight 1.34 kg
• Fast heating to working condition
• Availability of protective casing
• Flame level control
• Long-term work with one fill
• It is inconvenient to pour fuel into the ignition container
• Insufficient grinding of the bottom seam of the tank

2 Bison Expert SAMOTLOR SM-15, with cast iron ejector

The gasoline blowtorch from the domestic brand “Zubr” is especially popular. Users are attracted by the low price and good quality. Many people buy it because it is a trusted manufacturer of various high-quality tools and equipment. It is relatively small in size, but one refill is enough for an hour of work. Volume – 1.5 liters. Important advantages are a cast iron ejector and the presence of a protective casing that prevents the flame from blowing out when working outside in windy weather. At the bottom of the handle there is a compartment for a repair kit, closed with a stopper - this is also convenient.

The lamp can run on 92 or 95 unleaded gasoline. The design is simple, safe and reliable. Reviews vary, but more often users note a good heating speed, low weight even when filled, and the presence of a repair kit. The downside is that the nozzle often gets clogged and you have to clean it with a needle between jobs.

Bars 91452

Rating (2021): 4.0 Best heat, stable flame

The special design of the ejector ensures good fast heating and uniform flame flow.

• Characteristics
• Average price: 1800 rub.
• Country Russia
• Tank volume: 2 l
• Maximum operating temperature: not specified
• Metal ejector: not specified
• Repair kit: yes

The lamp heats up very quickly, emits a powerful and stable flame - it is safe to work in windy weather. Any model has a clogged nozzle. In this case, this is not a problem - the nozzle is located outside, it is convenient to unscrew it for cleaning. The metal of the burner is quite thick - you can count on a long service life.

The kit includes a repair kit. For convenience, it is hidden in the handle. The device can run on 92 and 95 gasoline. The scope of application is wide: it can be used for repair work, home use, welding, and heat treatment of parts. The disadvantage of the lamp is that it is difficult to regulate the flame power.

Advantages and disadvantages

• Wear-resistant burner
• The nozzle can be easily unscrewed for cleaning
• Even flame
• Convenient placement of the repair kit
• Sophisticated flame pressure control

Zubr Professional – Samotlor

Score (2021): 4.07 Best Reliability and Maintainability Tool

The design of the tool is superior to its competitors due to the thoughtfulness of each element, high build quality and the right choice of materials.

• Characteristics
• Average price: 1500 rub.
• Country Russia
• Tank volume: 1 / 1.5 / 2 l
• Maximum operating temperature: 1100 degrees
• Extruder metal: cast iron
• Repair kit: yes

This blowtorch model is produced by a well-known manufacturer in the CIS, whose product quality has stood the test for years in difficult climatic conditions. Such a gasoline device, despite its simplicity of design, has a durable cast-iron ejector, which evenly maintains the desired temperature and cools slowly. Performance properties do not change at very low temperatures due to complete combustion of the fuel. At the same time, the flame, protected from the wind by a special shell, has a stable intensity. This is also facilitated by an increase in the diameter of the pump. The best tool in its class, as noted in customer reviews, suffers from the common disadvantages of many competing models: a clogged nozzle that requires cleaning with a needle, and a loud sound.

SIBRTECH 91442

Rating (2021): 4.25 Best value for money

The multifunctional device is capable of performing a large amount of work and is inexpensive.

• Characteristics
• Average price: 1100 rub.
• Country: Russia (made in China)
• Tank volume: 1.5 l
• Maximum operating temperature: not specified
• Metal ejector: not specified
• Repair kit: no

High-quality and reliable inexpensive blowtorch. Can run on any brand of gasoline, except leaded. Despite the fact that the tank capacity is 1.5 liters, it is better not to fill it completely - a maximum of 1.1 liters. Fuel is consumed economically; one refill is enough for an hour of work. The handle is steel, simple, but quite comfortable.

Reviews contain different information. Among the advantages, users note the ease of adjusting the fuel supply; among the disadvantages, the injector quickly becomes clogged. It is recommended to clean it after each use.

Advantages and disadvantages

• Optimal equipment at a low price
• Good compatibility with popular brands of gasoline
• Convenient metal handle with repair kit inside
• Easy fuel control
• Periodic nozzle clogging

The best gasoline and kerosene blowtorches

10Caliber LP-1.0

It is considered a budget model with a wide range of applications. It can not only warm up metal pipes, but also warm up a diesel engine, as well as perform other tasks. Using a manual blower and valve, the user can adjust the flame strength.

The capacity is quite small - only a liter. There are other versions of the same model with a larger tank capacity - 1.5 and even 2 liters.

pros

• flame power adjustment using a manual blower and valve;
• user-friendly design;
• strong flame;
• affordable price.

Minuses

• small capacity.

Caliber LP-1.0

9STURM 5015-01-15

This lamp from the Sturm company is designed for heating various objects. It has a durable steel body that can prevent explosion or fire. This tool is characterized by the presence of an adjusting screw that regulates the flame power and heating temperature. The comfortable handle of this model allows you to work with the tool as comfortably as possible.

Flame temperature – 1100 degrees. Consumption – 1200 grams per hour. The tank volume of this model is 1.5 liters, although the fuel runs out quickly.

pros

• affordable price;
• high strength;
• Ease of use.

Minuses

• high fuel consumption.

STURM 5015-01-15

8Zubr Samotlor SM-15

One of the best models from Zubr is Samotlor SM-15. This lamp can work for an hour with two types of fuel - gasoline and kerosene.

This model has two advantages. The first is a cast iron ejector, with which the operation of the device will become more reliable and convenient. The second was a protective casing, which avoids blowing out the flame on the street.

Important! The container must not be completely filled so that the air acts as a compensator, creating the required pressure.

For convenience, there is a large handle at the bottom of the device. All the controls are located at the top.

pros

• long operating time;
• cast iron ejector;
• durable protective casing;
• ease of use;
• high degree of security.

Minuses

• there are none.

Bison Samotlor SM-15

7ZUBR 40652-2.0_z02

This blowtorch is a more modern version compared to the SM-15. It can not be used to heat pipes and heat the paintwork, but also do other things right up to the roof of the roof.

Fast heating is made possible due to the special design of the supply tube, which is located in the lamp ejector.

The piston seal is made of natural material. This solution can increase the service life of the device. The small ejector helps produce the most concentrated flame.

The handle turned out to be quite comfortable from a geometric point of view. It's pretty easy to grab.

Interesting! Inside the handle there is everything needed for repair.

The tank capacity of this model is two liters. Large volume is combined with long work due to low consumption.

pros

• large tank capacity;
• low fuel consumption;
• ease of use.

Minuses

• not detected.

BISON 40652-2.0_z02

6ZUBR “PROFESSIONAL”

The domestically produced blowtorch has an ejector in its design that runs on gasoline. It is distinguished by good performance and high quality materials.

Important! This model is one of the few that can run on A92/A95 gasoline.

This lamp can be used indoors. The reason for this is the design, which allows the release of less harmful fumes.

This model is sold with two tank options - 1.5 and 2 liters.

pros

• high quality of materials used in lamp assembly;
• works with any gasoline;
• two variations of tanks;
• Little odor is released during operation.

Minuses

• high price.

BISON "PROFESSIONAL"

5SPARTA 91443

This model opens the TOP 5 gasoline and kerosene models of blowtorches. The housing is strong enough to prevent fuel explosion or fire. The handle is made closed in order to prevent the collection of water in it and, accordingly, the appearance of corrosion. The pump neck is located on the side rather than on top, which allows the nozzle to be pushed into tight spaces.

The flame temperature can reach up to 1100 degrees. The narrow nozzle makes the flame thinner and the heating more precise. The torch heats up quite quickly, which can be used when covering the roof and heating the liquid.

Important! Tank volume – 1.5 l. Fuel consumption – 900 g/h. Weight – 2 kg.

This model is considered one of the best in terms of safety. For example, ignition in other models requires opening a special, relatively large hatch. There is a fuel leak in their tank and a match falls there. This model has a closed chamber and has a small hole for a match to enter. This makes ignition safer.

pros

• closed handle;
• you can adjust the torch level;
• The default narrow nozzle lengthens the torch.

Minuses

• there is no pre-heating function;
• the valve turned out to be tight.

SPARTA 91443

4Bars MIR-91451

The Bars company has released a high-quality kerosene blowtorch. It has a chamber with preheating and a powerful nozzle, which makes the flame stable and the heating of the material constant.

The tank volume of this blowtorch is 1.5 liters.

This lamp is suitable for those who prefer to use kerosene instead of gasoline, since the former is considered more harmful to health than the latter.

pros

• high quality workmanship;
• easy to use;
• presence of a preheating chamber.

Minuses

• high price.

Leopard MIR-91451

3BARS 91452

The top three is opened by another model, already the oldest, from the BARS brand. It attracts many of its potential buyers. First of all, with its durable frame, which is not afraid of corrosion due to powder coating. In addition, this model has a very comfortable closed-type handle with a compartment for storing small items.

The tank volume of this model is two liters, which allows this device to work for about two hours without interruption. The tank is refilled using a pump, which is connected to the tank at a certain location. The neck with a steel butterfly stop makes it easier to unscrew the lid if necessary. The handle is a closed type, which allows water not to linger on it.

The blowtorch in this rating is noted not only for its good technical characteristics, but also for the presence of a preheating function.

If you need a stable burning torch when working in the wind or in cold climates, a potential buyer should purchase this blowtorch.

pros

• small dimensions and light weight;
• efficiency;
• the volumetric handle is made in a convenient shape, which makes it easier to hold in the hand;
• The body is high quality and beautifully painted.

Minuses

• welding seams are somewhat sloppy;
• refilling using a pump.

BARS 91452

2SIBRTECH 91442

In this category, “silver” goes to a model manufactured by the domestic brand Sibrtech.

The installation is powered by gasoline and is capable of producing a torch of the highest possible temperature. It turns out the flame temperature is 1450 degrees. With a 1.5-liter tank, the lamp consumes about 900 grams of fuel per hour, which is enough for an hour and a half of operation without interruption.

The designers installed a tray under the nozzle used for pre-ignition. The ignition principle is simple:

• the tap opens,
• gasoline dripping onto the tray
• gasoline spilled in the tray is lit with a match
• air supply increases.

You need to fill the tank with gasoline through the neck with the pump, so the first thing you need to do is remove the rod with the cylinder. At the back there is a raised regulator that is quite convenient to turn.

Important! It is considered “unkillable” because it can survive many events.

If you need a tool with a long service life, then you should take a closer look at this blowtorch.

pros

• good flame;
• easy to use;
• safe ignition tray;
• comfortable handle.

Minuses

• The black paint on this device swells when heated;
• even when the valve is closed, air flows out.

SIBRTECH 91442

1Sibrteh 2.0 L 91444

The best model was a blowtorch from the domestic brand Sibrtech. It is excellent for various soldering and thermal work that requires open heating.

The flame power and heating temperature can be adjusted using a valve. The consumption of this model is 1.2 liters per hour.

Important! AI 92/95 gasoline is suitable as fuel.

This lamp is suitable for use in various conditions - domestic, road and industrial conditions.

pros

• long operating time;
• good ejector and protective casing;
• easy to use;
• high degree of security.

Minuses

• none.

Sibrteh 2.0 L 91444

You may be wondering which electricity meter to get.

Sparta 91443

Rating (2021): 4.73 Faster ignition

Unlike many analog lamps, the design includes a closed fuel supply chamber, ensuring fast and safe ignition.

• Characteristics
• Average price: 1000 rub.
• Country: Germany (made in China)
• Tank volume: 1.5 l
• Maximum operating temperature: 1100 degrees
• Extruder metal: steel
• Repair kit: no

The welding tool attracts attention with its design features, the optimal volume of the steel tank for many types of work with a neck located on the side for convenience. With its help, liquids of different densities and pipes are easily and quickly heated; it is indispensable when carrying out waterproofing measures. The open flame appears quickly and has a wedge-shaped shape, which allows the lamp to be used in narrow and hard-to-reach places. In addition, its flow can be adjusted with a screw. The fuel used is 92a or 95a unleaded gasoline. The device has an economical fuel consumption of 1.2 l/h. In reviews, users take into account such shortcomings of the model as the tightness of the valve opening, the difficulty of finding a repair kit.

Advantages and disadvantages

• Closed fuel pre-feed chamber
• Accelerated ignition
• Lateral neck position
• Suitable for use in hard to reach places
• Flame level is adjustable
• The valve is difficult to open
• Problems finding a repair kit

How to use a blowtorch

Using a blowtorch requires taking into account many nuances of the work. You need to fill the following immediately: you need to fill the tank about ¾ of the total volume of the tank. Example: the tank volume is 1.5 liters, then you need to fill it to about 1.1 liters. This is done to avoid accidents related to tool tanks.

Before starting the device, you need to check everything. For example, the adjusting screw must be checked - it must be tightly closed. Then you need to check what kind of fuel was filled - according to the instructions or not. Afterwards, make sure that there is increased pressure inside the accessory, because the more air is pumped, the more difficult it will be for the pump rod to move.

With a half-filled 1 liter tank, you need to pump the pump about 60 times. It happens that it is more or less - the features of the soldering device play a role here. The main thing is that if the rod moves hard, but after removing the hand it moves on its own, then there is no need to pump it up - you can start working.

Important! If the pump is slow to move, it is removed and the cuff is lubricated with grease.

You must act as carefully as possible if you do not want to get burned. When about 75% of the fuel has burned out, the propeller opens slightly. It is better to start using it in a minute or two.

Interesting! A blowtorch can be used in a field kitchen if you have a tripod.

Let's consider the basic safety rules when working with such a tool:

• do not open the lamp during operation;
• Do not pour fuel into a heated tank - you need to wait until the tank cools down;
• try not to use a blowtorch in a closed room - only if there is no other way, and you should work for a short time, after which you ventilate the room;
• constantly monitor the condition of the torch and its direction so as not to touch flammable objects;
• when the lamp cools down, bleed off all the air;
• clean the lamp everywhere.

Important! Do not operate a lamp that shows signs of fuel leakage.

To ensure a longer service life of the blowtorch, the user should reduce the amount of time he or she operates the torch. Monitoring the temperature of the cylinder will also be useful, since when the cylinder reaches a temperature of 50 degrees or higher, it will need to be cooled quickly.

Important! Under no circumstances should you smoke near the lamp. If she is ready to work, even more so.

Do not inflate the fuel tank with air beyond normal limits - this is very dangerous for human life. If flammable materials within a five-meter radius are not removed, they can either be covered with steel screens or water can be spilled. A fire extinguisher or a box of sand for extinguishing is placed near the grill.

Important! It is better to work inside a well after checking for the presence of explosive gases in the layers of the earth.

There are also these rules:

• The filler plug must be screwed in until it stops;
• disassemble the lamp only when it is empty and cooled down;
• leaking fuel is a reason to stop all work;
• It would be better not to place the device in a place where there is strong heating.

Express 8700

Rating (2021): 4.15 Maximum heating with minimum gas consumption

The universal type design allows both soft and hard soldering due to the high maximum temperature.

• Characteristics
• Average price: 1800 rub.
• Country: France
• Tank volume: 19 ml
• Maximum operating temperature: 2010 degrees
• Nozzle metal: steel
• Repair kit: no

A very practical welding lamp model is designed for high-quality use during construction and other work due to its powerful technical potential. It is great for soldering copper and tin of various diameters. It is permissible to use fluorescent copper, silver or soft solder as solder. The length of the sharp flame reaches 17 cm, it is continuous and uniform. The reinforced metal tip can withstand a working pressure of 1.5 bar. At the same time, propane-butane consumption is minimal compared to competing models, it is 110 g/hour. The tank, made of wear-resistant steel, has an optimal volume that allows continuous operation for 1.15 - 1.30 hours. Disadvantages of the model: power is less than analogues (1.6 kW), increased body dimensions.

Advantages and disadvantages

• High temperature conditions obtained
• Suitable for soft and hard soldering
• Adjustable flame intensity
• Minimum gas consumption
• Compatible with punchable cylinders (0.19 l) from a number of manufacturers
• Less than the rating leaders
• Large body is not suitable for hard-to-reach places

Campingaz Soudogaz X2000

Rating (2021): 4.2 High quality piezo ignition

The device is great for small heating jobs; instant ignition speeds up the work process.

• Characteristics
• Average price: 1600 rub.
• Country: France (made in China)
• Tank volume: 19 ml
• Maximum operating temperature: 1750 degrees
• Metal nozzle: brass
• Repair kit: no

Topex 44E141

Rating (2021): 4.3 Reviewed 17 reviews from resources: VseInstrumenty, CMP234.ru, 220 Volt Bright design in an ergonomic format

It is difficult to pass by such a device; its yellow-red color and convenient body are visible from afar, which increases the safety of the work performed.

• Characteristics
• Average price: 1800 rub.
• Country: Poland
• Tank volume: 38ml
• Maximum operating temperature: 1350 degrees
• Metal nozzle: brass
• Repair kit: no

This device is effective for heating objects, soldering and soldering at home with forced ventilation and outdoors. The metal container is coated with a thick layer of anti-corrosion enamel, and the upper part (start button, control valve, handle) is made of plastic. The holder is easy to grip and long-lasting and matches the volume of a puncture-connected butane container at 190 grams. The fuel in the lamp is consumed on average 180 g/h, however, simply by turning the valve wheel, you can adjust the flame and pressure. Cons: no gas cylinder included, poor quality piezo ignition at low temperatures.

Advantages and disadvantages

• Functional design
• Anti-corrosion protection of metal containers
• Easy flame level adjustment
• Convenient upper position of the activation button
• Piezo ignition does not always work quickly at low temperatures
• The punching gas cylinder is not included

DREMEL Versaflame 2200-4

Rating (2021): 4.36 Based on 40 reviews from resources: IRecommend, OZON, VseInstrumenty, 220 Volt Best functional potential

The combination type device can be used with various types of accessories included in the package, which increases its functionality.

• Characteristics
• Average price: 3000 rub.
• Country: Taiwan
• Tank volume: 42 ml
• Maximum operating temperature: 1200 degrees
• Metal nozzle: not specified
• Repair kit: no

One of the best options for multifunctional stationary hydroxides. You can use an open flame with a catalyst and a soldering tip. Powered by liquefied butane. For convenience, the model is equipped with piezoelectric ignition. With a tank capacity of 22 grams, the device operates in intensive mode for about 75 minutes.

There are many useful options: child lock, removable leg for stationary operation, flame level lock, temperature selection. The kit includes several attachments: for welding, torch extension. In terms of functionality, the lamp resembles a professional model. Users report ease of charging, very short warm-up time, and ease of use. The only downside is the rather high cost.

Advantages and disadvantages

• Functional design
• Injector quick connection
• Child lock
• Extended equipment with nozzles
• High price

How to choose a blowtorch

If you need a blowtorch, you should pay attention to the following parameters when choosing:

Wester GG02

Rating (2021): 4.67 Safe design for comfortable use

The product has protective design elements that make working with open fire safe and convenient.

• Characteristics
• Average price: 950 rub.
• Country: Czech Republic
• Tank volume: 17ml
• Maximum operating temperature: 1300 degrees
• Metal nozzle: steel with ceramics
• Repair kit: no

The welding machine is best for heating, painting, welding and soldering pipes. Simply pressing the piezoelectric ignition button activates the device, and the temperature can be adjusted using a ribbed plastic valve by simply rotating it. Having a properly positioned safety ignition cursor protected from accidental pressure increases operational safety. For the same purpose, a holder is provided to ensure a stable position of the lamp. Another advantage mentioned in reviews is the presence of a viewing window in the built-in tank for visual control of the amount of gas. Cons: not suitable for welding small objects, tank material is plastic.

Use of a blowtorch

Some time ago, a blowtorch was used wherever it was necessary to heat the material strongly, since there was no alternative to the tool. Now in many ways the lamp is being replaced by more modern tools, which are easier and safer to use. But sometimes it happens that there is no opportunity to take advantage of the fruits of modern progress, such as the lack of electricity, or the inability to use a gas appliance in the cold.