Search for certified welders in the register of the National Welding Control Agency (NAKS): detailed instructions

What is the NAKS registry

Explanation of the abbreviation - National Agency for Welding Control.

The scope of activities of the department includes:

• training and certification of high-class welders;
• equipment testing and certification;
• inspection of organizations acting as contractors in critical projects;
• creation and improvement of work performance and safety regulations, standards, and methodological manuals;
• carrying out examinations;
• consulting.

The register is a list of welders and technical workers who have been trained at 1 of the agency’s research centers or in special courses. These are available in all major cities of Russia. An open access database allows an employer to verify the authenticity of an employee's employment ID.

Specialists of 4 levels are being trained:

1. Worker.
2. Master.
3. Technologist.
4. Engineer.

Those who pass the exams are given a certificate and certificate, and welders are also given a brand with an individual code. With its help, the worker leaves an impression at the junction of the parts. Subsequently, when a defect is identified, the author of an unreliable weld is easily identified and held accountable.

Under the following conditions, the certificate becomes invalid:

• expired;
• the break from work in the specialty was 6 months or more.

If an employee systematically makes gross mistakes, then, at the request of the enterprise management, the agency’s certification commission can revoke the document.

NAKS registers.

Features of certification

Certification is an important and secondary stage for large industries and enterprises. First of all, welding is certified. NAKS determines which technologies will be used in a particular production, the agency makes a conclusion and gives permission for the work being carried out. For this reason, it is very important to approach the preparation process with full responsibility.

In order for welding certification to be carried out under the supervision of NAKS, authorized employees of the enterprise collect the required documents and independently submit an application. Afterwards, a commission arrives at the production site and conducts an audit.

During the inspection, the commission takes into account compliance with the following requirements:

• sufficient amount of equipment at the plant;
• no problems with staff;
• compliance with important norms and rules - labor, fire safety and others.

It is worth noting! The commission operates in accordance with special regulatory documents. In accordance with them, it makes basic requirements for production institutions.

Certification of welding production by NAKS is a mandatory event that is carried out at every high-risk production enterprise. This is the law that all official proceedings must adhere to. A study is also carried out on the suitability of the technologies used. The commission must ensure that the equipment used can produce products that meet all qualities and standards.

How to get on the register

The employing company or the welder himself as an individual submits a package of documents to the local NAKS training center:

• statement;
• diploma of a welder or representative of a related profession;
• certificate of completion of a special training course;
• copies of papers confirming the fact of compliance with safety standards;
• medical certificate in form 086U;
• an extract from the work book, allowing you to determine the length of work as a welder;
• tuition payment receipt;
• photographs measuring 3x4 cm (2 pcs.).

We recommend reading How ultrasonic flaw detection is used
If the applicant is an employer, an extract from the work record book is submitted with a visa from the head of the personnel department.

The employee is enrolled in a training group, at the end of the course he takes an exam and receives a certificate. After this, the data of all certified specialists is entered into the register.

It is impossible to obtain a certificate and get into the database without personally confirming theoretical knowledge and practical skills. An invitation to online courses with exams taken remotely and documents delivered by mail can only come from scammers.

There are 3 types of certification:

1. Primary.
2. Repeated. Depending on the level of the employee, it is carried out every year or two.
3. Extraordinary. They resort to it in case of downtime for more than six months.

Primary certification.
An employer can also send an employee to an unscheduled inspection if there are doubts about his professionalism.

Types of certification

Certification of welding technologies under the control of NAKS is carried out in several stages. Each type of this procedure has certain features and nuances that are important to study in advance. This will help you avoid unpleasant problems in the future.

The main types of NACS studies include:

• research _ This type of audit is carried out under the control of legislation. Activities are required to confirm compliance or detect non-conformity of the properties of completed welds made of metal or plastic material. Research certification of welding materials and welding works consists of several stages;
• production _ Certification under the control of NAKS of welding materials and welding is required to control any enterprise whose activities are aimed at installation and repair in areas with high danger. Production revision of welding technology under the control of NAKS is usually divided into subtypes - primary, periodic and extraordinary.

Important! Extraordinary NAKS certification of welding materials and welding can be carried out at the request of the company itself, represented by its process control department. It is usually performed when violations of an organization's security rules are detected.

Checking for ID by last name

To find out whether a specialist is listed in the NAKS register, perform the following steps:

1. Connect to the official portal of the agency.
2. Enter your full name. and other information about the employee you are looking for.
3. They check the box with the text “I am not a robot” and complete the proposed task.
4. Click the “Filter” button.

The screen displays information about the employee or a message indicating that there is no record with such data.

If a search by last name yields several results, create a new request and enter additional information in the appropriate fields:

• identification alphanumeric number of the certificate;
• brand;
• discharge;
• the name of the center where the employee was trained (in the proposed list, put a “tick” in front of the position of interest);
• dates of certification and expiration of the document;
• extension period;
• permitted types of work (marked in the list);
• areas of production to which there is access;
• compliance with the requirements of PJSC AK Transneft (yes/no).

We recommend reading: What to do if your eyes hurt from welding

Some fields open after clicking the "Details" button.

Search the NAKS register.

The requirements of Transneft are met by highly qualified craftsmen. They receive permission to work in the gas and oil industries.

The registry allows you not only to check the validity or authenticity of the certificate, but also to find a certified welder or technician in the region.

To do this, in the request, tick the centers located here and indicate the desired expiration date of the document. The system will display a list of persons who have studied in these departments and whose certificates have not yet expired.

Algorithm

In order for industrial institutions to pass the certification test, the personnel must include at least one third-level welding specialist and at least two welders. They must be certified, they must have supporting documentation.

To obtain a NAKS certificate of certification of welding technology, you must submit documents from the enterprise that manufactures the product. An application with documents is submitted to the supervisory authority.

To obtain a certificate of certification of welding materials and technologies, you need to collect documents from the list below:

1. Articles of association.
2. Diagrams of the location of pipe communications and welding equipment in the production workshop.
3. An agreement concluded with a laboratory that controls the quality of welds at the enterprise.
4. It is imperative to collect all certification documents for the welding equipment used, for metals and other materials used to manufacture products.
5. NAKS certificates of all employees, they must indicate the level of qualifications.

If all documentation is in perfect order, then the production organization will be allowed to audit. Specialists must draw up a plan indicating all the important criteria that are taken into account during production. If the production establishment passes the inspection, a certificate is issued that is valid for 4 years.

The certificate of certification of welding materials and technologies received by NAKS is considered confirmation that the organization has passed the necessary checks and complies with the standards. It must prove that the production employs highly qualified specialists, the workshop is equipped with the required equipment and materials, which have also been certified.

What to do if you can’t find a specialist

A certified specialist may not find himself in the NAKS register if:

1. An error was made when filling out the request form.
2. Uppercase and uppercase letters are mixed up (search is case sensitive).
3. Instead of Cyrillic letters, Latin ones of the same type were introduced, for example “a” or “x”. Similar mistakes are often made when working with mobile devices.
4. There was a failure of the system. This happens sometimes, so it is recommended to try again after 5-10 minutes.
5. The record has not yet been created. The database is updated with new data within 2 weeks from the date of passing the exam.

If the search is carried out in relation to a third party and the information about him is entered correctly, a negative result indicates forgery of documents.

Employee certification

Certification of welding production specialists by NAKS is a mandatory procedure that must be carried out in production. It should be carried out in different situations - during changes in welding technology, during advanced training, during a short-term cessation of activity of one or more employees. But you definitely need to consider the main nuances of employee certification.

How is certification carried out?

To undergo certification, the employee must independently come to the NAKS center. The center conducts examinations, based on the results of which the person being checked is given an identification document. He assigns him the necessary degree of qualification. It can also be used to confirm a previously assigned qualification level.

For the test result to be valid, the following requirements must be met:

1. The first step is to draw up an application; you can use a sample for this. Afterwards it must be submitted to a specialized certification center.
2. The application must be accompanied by the required documents - copies of the identity card of the person being checked, diploma, documents including certificates of certification for welding-related professions, copies of the work book, employment orders. Photos taken in accordance with NAKS requirements.
3. At the next stage, the time and place of the inspection is agreed upon. Certification of welding and workers under the control of NAKS are sent to training, which is based on a specialized program and an exam on knowledge of the required material.
4. Passing final exams to confirm qualifications. There are usually two of them - practical and theoretical. But training must be done first.
5. If all exams are passed successfully, the employee is issued a certificate of assignment of a certain level of qualification or renewal of an existing certificate.

It is worth noting! Applications can be submitted from legal entities, namely from an enterprise, as well as from an individual in situations where the welder has decided to apply for inspection independently.

If the welder’s documents are in full order, they are allowed to take the exams. There are only two of them - practical and theoretical. The second includes knowledge of the theory of welding, namely its technologies, principles of conduct and other important nuances. Practice comes first, and then theory. If a specialist cannot cope with the practice, then he is not allowed to take the theoretical exam. Retake is usually done after a month.

But for specialists of the second, third and fourth levels, only a theoretical exam is conducted. Engineers, technologists, and chief welders must know the standards of welding technologies, narrow areas, principles and other important nuances.

But in any case, you need to know what the NAKS register of certified welding materials and technologies includes, namely what stages of testing, required documents and types of certification. For the production audit process to be successful, it is necessary to adhere to established standards and follow the basic rules.

List of certification centers

Name of the AC: City: AC carrying out certification at the facilities of JSC AK Transneft: -

Barnaul - Sterlitamak

- Ufa - Kostroma - Vladimir - Saransk - Yaroslavl - Nizhny Novgorod -

Irkutsk - Ulan-Ude - Yakutsk -

Omsk - Novosibirsk - Novosibirsk -

Tomsk - Perm - Izhevsk -

Kirov - Izhevsk - Perm - Kaluga - Moscow - Tula - Bryansk - Moscow - Ryazan -

Moscow - Smolensk - Tver -

Kazan - Cheboksary - Tolyatti - Saratov - Saratov - Penza - Ulyanovsk - Kaliningrad -

Veliky Novgorod - Arkhangelsk -

Leningrad region - Murmansk - Vologda - St. Petersburg -

Syktyvkar - St. Petersburg - Monchegorsk - Rostock - Petrozavodsk - Norilsk - Kemerovo - Krasnoyarsk -

Tobolsk - Chelyabinsk - Surgut -

Kurgan - Tyumen - Novy Urengoy - Yekaterinburg - Nizhnevartovsk - Magnitogorsk - Orenburg -

Surgut - Noyabrsk - Kogalym -

Yuzhno-Sakhalinsk - Vladivostok - Magadan - Petropavlovsk-Kamchatsky -

Khabarovsk - Svobodny - Voronezh - Kursk - Voronezh - Lipetsk - Belgorod - Tambov - Astrakhan - Volgograd - Nevinnomyssk - Rostov-on-Don - Krasnodar - Krasnodar - Barnaul * - Ufa * - Ivanovo * - Ivanovo * - Yaroslavl * - Saransk * - Sarov * - Nizhny Novgorod * - .

Saransk * - Sarov * - Nizhny Novgorod * -

Nizhny Novgorod * - Ivanovo * - Yakutsk * - Ulan-Ude * -

Irkutsk * - Omsk * - Izhevsk * - Kirov * - Podolsk * - Kaluga * - Moscow * - Moscow * - Tver * -

Smolensk region * - Moscow * -

Moscow * - Moscow * - Moscow * - Moscow * - Moscow * - Lyubertsy * - Smolensk * - Moscow * -

Moscow * - Bryansk * - Tula * -

Moscow region * - Moscow * -

Chekhov * - Moscow * - Ryazan * -

Moscow * - Moscow city * - Moscow city * - city

Tula * - Moscow * - Moscow * - Kazan * - Cheboksary * - Kazan * - Bugulma * -

Yoshkar-Ola * - Kazan * -

Kazan * - Samara * - Saratov * -

Saratov * - Penza city * - Saratov city * - Saratov city * - Penza city * - Penza city * - city

Samara * - Togliatti * - St. Petersburg * - St. Petersburg * - Monchegorsk * - St. Petersburg * -

Kemerovo * - Kemerovo * - Krasnoyarsk * - Tyumen * -

Tyumen * - Nizhnevartovsk * - Ekaterinburg * - Chelyabinsk * - Orenburg * - Magnitogorsk * -

Orenburg * - Surgut * - Tyumen * - Yekaterinburg * -

Chelyabinsk * - Nizhnevartovsk * -

Ekaterinburg * - Surgut * -

Ekaterinburg * - Magadan * - Vladivostok * - Tambov * -

Belgorod * - Belgorod * - Voronezh * - Krasnodar * - Astrakhan * - Astrakhan * -

Krasnodar * - Krasnodar * - Volgograd * - Krasnodar * -

Krasnodar * - Volgograd * - Volgograd * - Volgograd * -

Sochi * - Rostov-on-Don * * - Excluded from the register** - Activities suspended

List of certification centers

Name of the AC: City: ACs carrying out certification at the facilities of Transneft JSC:

- Kazan - Rostov-on-Don -

Volgograd - Surgut - Krasnodar -

Omsk - Nizhny Novgorod -

Vologda - Perm - Yekaterinburg - Krasnoyarsk - Yuzhno-Sakhalinsk - Vladimir - Novosibirsk -

Tyumen - Kirov - Tomsk -

Kaluga - Syktyvkar - Petrozavodsk - St. Petersburg - Norilsk -

Saratov - Chelyabinsk - Krasnodar - Vladivostok - Voronezh -

Tula - Barnaul - Bryansk - Moscow - Magadan - Kemerovo -

Perm - Kursk - Novy Urengoy - Ulan-Ude - Izhevsk - St. Petersburg - Moscow - Irkutsk - Rostock -

Voronezh - Penza - Noyabrsk - Petropavlovsk-Kamchatsky - Yekaterinburg - Khabarovsk -

Nizhny Novgorod - Tyumen - city

Ryazan - Yakutsk - Novosibirsk - Sterlitamak - Togliatti - Ulyanovsk - Moscow - Krasnodar -

Smolensk - Izhevsk - Kaliningrad - Saransk - Astrakhan - Magnitogorsk - Nevinnomyssk - Kazan -

Cheboksary - Volgograd - Veliky Novgorod - Arkhangelsk - Leningrad Region - Saratov -

Orenburg - Belgorod - Samara - Murmansk - Yaroslavl - Svobodny -

Tver - Tambov - Rostov-on-Don - Kostroma - Lipetsk - Ufa - Moscow * - Voronezh * - Ufa * -

Moscow * - St. Petersburg * -

Togliatti * - Krasnodar * -

Vladivostok * - Samara * - Moscow * - Irkutsk * - Ivanovo * -

Tula * - Izhevsk * - Kazan * - Moscow * - Orenburg * - Kemerovo * - Saratov * -

Moscow * - Moscow * - Yaroslavl * - Kazan * - Penza * - Penza * -

Saransk * - Barnaul * - Chelyabinsk * - Magadan * - Tver * - Magnitogorsk * -

Ekaterinburg * - Nizhnevartovsk * - Irkutsk * - Moscow * - Pochep * - Volgograd * - Moscow * - St. Petersburg * - Moscow * - Moscow * - Penza * - Perm * - Tambov * - Moscow * - Surgut * - Saratov * - Samara * - Belgorod * - Kazan * - Omsk * - Moscow * -

Kazan * - Omsk * - Moscow * -

Moscow * - Cheboksary * - Moscow * - Volgograd * -

Moscow * - Sochi * - Nizhny Novgorod * - St. Petersburg * - Moscow ** - Samara * - Astrakhan * -

Kazan * - Smolensk * - Ivanovo * - Astrakhan * -

Orenburg * - Lyubertsy * * - Excluded from the register** - Activities suspended

09/05/2022. Anniversary of Brodyagin Vladimir Nikolaevich

The competition was held in 5 nominations: VIC, RK, UK, VIC+UK, VIC+RK.

According to the results of the competition, the winners were: VIC nomination: Winner - Tynyshtykulov Akimzhan Erkinuly (Tekhnoprom LLC) RK nomination: Winner - Alexander Pavlovich Konovalov (Strela PA JSC) Management Company nomination: Winner - Konstantin Mikhailovich Danilov (URALMASH-GORNOE LLC EQUIPMENT") Multinomination VIC + Management Company: Winner – Sergey Aleksandrovich Osadchuk (PromTEK LLC) Multinomination VIC + RK: Winner – Yuri Iosifovich Cherepanov (PromTEK LLC) The winners and prize-winners of the regional stage of the competition were awarded diplomas and memorable gifts.

e-mail*: 08/30/2022 August 25, 2022 based on LLC

"Lead certification center of the Altai region NAKS"

(Barnaul) the Altai regional stage of the annual All-Russian competition of RONKTD in non-destructive testing “Flaw Detection Technologist 2022” took place.

Representatives of the following organizations competed for the title of the best flaw detector of the Altai Territory: STEK LLC (Barnaul), Siberian Engineering Analytical Center JSC (Barnaul), Altai-Koks JSC (Barnaul).

Zarinsk), Barnaul Boiler Plant LLC (Barnaul), Sibenergomash-BKZ LLC (Barnaul), PMP Metallurgmontazh LLC (Barnaul).

Biysk). The event program was opened by the director of GAC AR NAKS LLC, Doctor of Technical Sciences. Radchenko M.V. The President of RONKTD, Doctor of Technical Sciences, delivered parting words in a video message.

Syasko V.A. Head of the methodological center of the Non-Destructive Testing System of the Russian Society for Non-Destructive Testing and Technical Diagnostics at Hazardous Production Facilities (SNK OPO RONKTD), Ph.D.

Galkin D.I. in his video message he told listeners about the prospects for the development of the SNK OPO RONKTD.

During the seminar, representatives of Rostechnadzor spoke: Head of the Altai Department for Supervision of Thermal Power Plants, Heat Generating Installations and Networks and Boiler Inspection Nemchenko N.K., Deputy Head of the Altai Department for Supervision of Thermal Power Plants, Heat Generating Installations and Networks and Boiler Inspection Samokish S.S.